| Citation: | XUE Mei-xin, WU Di, PIAO Ying. Effect of annular chamber radial width on the performance and inner flow characteristics of an after-burning oil pump[J]. Journal of Aerospace Power, 2012, 27(3): 689-694.
|
| [1] |
Barske U M.Development of some unconventional centrifugal pumps[J].Proceedings of the Institution of Mechanical Engineers,1960,174(1):437-461.
|
| [2] |
吴玉珍.部分流式切线泵在高效率条件下扬程系数的确定[J].化工设备与管道.2000,37(3):37-39. WU Yuzhen.Determination of head coefficient for part flow tangent pumps with high efficiency[J].Process Equipment & Piping,2000,37(3):37-39.(in Chinese)
|
| [3] |
朱祖超.开式高速离心泵的试验研究[J].浙江大学学报(工学版),1999,33(2):34-38. ZHU Zuchao.Experimental study on high-speed centrifugal pumps with an open impeller[J].Journal of Zhejiang University (Engineering Science),1999,33(2):34-38.(in Chinese)
|
| [4] |
朱祖超,麻明祥.小流量高扬程高速离心泵的加大流量设计[J].浙江大学学报(工学版),2001,35(1):11-15. ZHU Zuchao,MA Mingxiang.Increasing-flow design on small-flow-rate high-head high-speed centrifugal pumps[J].Journal of Zhejiang University (Engineering Science),2001,35(1):11-15.(in Chinese)
|
| [5] |
王乐勤,朱祖超.超低比转速高速诱导轮离心泵的不稳定控制与试验研究[J].工程热物理学报,1998,19(3):315-319. WANG Leqin,ZHU Zuchao.Instability-control and experimental study of superlow specific speed high-speed inducer-centrifugal pumps[J].Journal of Engineering Thermophysics,1998,19(3):315-319.(in Chinese)
|
| [6] |
陈党民,李新宏,黄淑娟.部分流泵整机非定常流动数值模拟[J].工程热物理学报,2005,26(S1):89-92. CHEN Dangmin,LI Xinhong,HUANG Shujuan.Numerical analysis of the unsteady flow field for a partial emission pump[J].Journal of Engineering Thermophysics,2005,26(S1):89-92.(in Chinese)
|
| [7] |
崔宝玲,赵瑞,张玉良,等.高速开式离心泵内部的流动特性研究[J].工程热物理学报,2010,31(4):601-605. CUI Baoling,ZHAO Rui,ZHANG Yuliang,et al.The research on flow characteristics of high-speed centrifugal pump with open impeller[J].Journal of Engineering Thermophysics,2010,31(4):601-605.(in Chinese)
|
| [8] |
张剑慈,崔宝玲,李昳,等.低比转速开式叶轮高速离心泵的优化设计系统[J].机械工程学报,2006,42(7):19-23. ZHANG Jianci,CUI Baoling,LI Yi,et al.Optimum design system of low-specific open-impeller high-speed centrifugal pump[J].Chinese Journal of Mechanical Engineering,2006,42(7):19-23.(in Chinese)
|
| [9] |
刘在伦,曾宪湘.蜗壳形状对高速部分流泵性能的影响[J].流体机械,2009(3):40-44. LIU Zailun,ZENG Xianxiang.Study on the performance of high-speed partial emission pump caused by the shape of volute[J].Fluid Machinery,2009,37(3):40-44.(in Chinese)
|
| [10] |
柴立平,潘兵辉,石海峡,等.高速部分流泵CFD计算和优化设计[J].排灌机械工程学报,2010,28(3):211-214. CHAI Liping,PAN Binghui,SHI Haixia,et al.CFD calculation and optimal design of high-speed partial emission pump[J].Journal of Drainage and Irrigation Machinery Engineering,2010,28(3):211-214.(in Chinese)
|
| [11] |
徐朝晖,吴玉林,陈乃祥,等.基于滑移网格与RNG湍流模型计算泵内的动静干扰[J].工程热物理学报,2005,26(1):66-68. XU Zhaohui,WU Yulin,CHEN Naixiang,et al.Simulation of turbulent flow in pump based on sliding mesh and RNG k-ε model[J].Journal of Engineering Thermophysics,2005,26(1):66-68.(in Chinese)
|
| [12] |
Barth T J,Jespersen D C.The design and application of upwind schemes on unstructured meshes.AIAA-1989-366,1989.
|
DownLoad: