Volume 27 Issue 5
May  2012
Turn off MathJax
Article Contents
SUN Ji-ning, LUO Xiang, LIU Jin-nan, XU Guo-qiang, ZHOU Zhi-xiang, QIU Chang-bo. Volume fraction technique for measuring the minimum value of mass flow in turbine rotor-stator disk cavities[J]. Journal of Aerospace Power, 2012, 27(5): 981-985.
Citation: SUN Ji-ning, LUO Xiang, LIU Jin-nan, XU Guo-qiang, ZHOU Zhi-xiang, QIU Chang-bo. Volume fraction technique for measuring the minimum value of mass flow in turbine rotor-stator disk cavities[J]. Journal of Aerospace Power, 2012, 27(5): 981-985.

Volume fraction technique for measuring the minimum value of mass flow in turbine rotor-stator disk cavities

  • Received Date: 2011-09-27
  • Publish Date: 2012-05-28
  • The minimum value of the cooling air flow is a critical flow rate for preventing hot gas ingestion happened in the rotor-stator disk cavity system of turbines.Experimental investigation based on volume fraction technique was performed to found the minimum values of cooling air flow of six typical rim seal structures with different rotating velocities and seal clearances.The results showed that,the minimum value of the seal air flow rate almost increases linearly with rotational velocity,and also increases with the seal clearance.Furthermore,the corresponding correlations about sealing flow rate were fitted for different structures,and an optimum option of rim seal structure was advised.

     

  • loading
  • [1]
    Abe T,Kikuchi J,Takeuchi H.An Investigation of Turbine Disc Cooling.Vienna:3rd CIMAC Congress,Paper GT30,1979.
    [2]
    Kobayashi N,Matsumato M,Shizuya M.An experimental investigation of a gas turbine disk cooling system[J].Engineering for Gas Turbines and Power,1984,106(1):136-141.
    [3]
    Phadke U P,Owen J M.Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems Part 2:the performance of simple seals in a quasi-axisymmetric external flow[J].International Journal of Heat and Fluid Flow,1988,9(2):106-112.
    [4]
    Hamabe K,Ishida K.Rim seal system with nonaxisymmetric main flow.ASME Paper 92-GT-160,1992.
    [5]
    Chew J M,Green T,Turner A B.Rim sealing of rotor-stator wheelspaces in the presence of external flow.ASME Paper 94-GT-126,1994.
    [6]
    Green T,Turner A B.Ingestion into the upstream wheelspace of an axial turbine stage[J].ASME Journal of Turbomachinery,1994,116(2):327-332.
    [7]
    Bohn D,Rudzinski B,Sturken N,et al.Experimental and numerical investigation of the influence of rotor blades on hot gas ingestion into the upstream cavity of an axial turbine stage.ASME Paper 2000-GT-284,2000.
    [8]
    Bohn D,Decker A,Ma H,et al.Influence of sealing air mass flow on the velocity distribution in and inside the rim seal of the upstream cavity of a 1.5-stage turbine.ASME Paper GT2003-38459,2003.
    [9]
    Bohn D,Wolff M.Improved formulation to determine minimum sealing flow Cw,min for different sealing configurations.ASME Paper GT2003-38465,2003.
    [10]
    Bohn D,Decker A,Ohlendorf N.Influnce of an axial and radial rim seal geometry on hot gas ingestion into the upstream cavity of a 1.5-stage turbine.ASME Paper GT2006-90453,2006.
    [11]
    Johnson B,Mack G,Paolillo R,et al.Turbine rim seal gas path floe ingestion mechanisms.AIAA Paper 94-2703,1994.
    [12]
    Phadke U P,Owen J M.Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems Part 1:the behavior of simple shrouded rotating-disk systems in a quiescent environment[J].International Journal of Heat and Fluid Flow,1988,9(2):98-105.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (2035) PDF downloads(611) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return