| Citation: | ZHANG Zheng-wei, ZHANG Jing-zhou, SHAO Wan-ren, SHAN Yong, WU Fei. Numerical caculation of flow and acoustics fields for separated exhaust nozzle with bypass offset[J]. Journal of Aerospace Power, 2012, 27(5): 1139-1145. |
| [1] |
Silva C R I.Numerical and empirical approaches for jet noise reduction investigation of co-flow effects.AIAA 2009-3405,2009.
|
| [2] |
穆宁 A F.航空声学[M].曹传钧,译.北京:北京航空航天大学出版社,1993.
|
| [3] |
郑礼宝.二元喷管热喷流噪声特性试验研究[J].空气动力学学报,2006,18(2):241-246. ZHENG Libao.Investigation of noise characteristics of hot exhaust from two dimensional nozzles[J].Acta Aerodynamica Sinica,2006,18(2):241-246.(in Chinese)
|
| [4] |
梁春华.GE90发动机的降噪技术[J].航空发动机,2004,30(4):40.
|
| [5] |
Callender B,Gutmark E.Far-field acoustic investigation into chevron nozzle mechanisms and trends.AIAA-6150-656,2005.
|
| [6] |
Henderson B,Kinzie K.Aeroacoustic improvements to fluidic chevron nozzles.AIAA-2006-2706,2006.
|
| [7] |
Calkins F T,Butler G W.Variable geometry chevrons for noise reduction.AIAA-2006-2546,2006.
|
| [8] |
Elkoby E N,Ronen.Bhat T R S.Correlating model-scale and full-scale test resulets of dual flow nozzle jets.AIAA-2002-2487,2002.
|
| [9] |
Papamoschou D.Noise suppression in moderate-speed multistream jets[J].AIAA-2002-2557,2002.
|
| [10] |
Lyrintzis A U A S.Coupling of integral acoustics methods with LES for jet noise prediction.AIAA-2004-0517,2004.
|
| [11] |
肖军生.高速轿车外流场气动噪声研究.吉林:吉林大学,2006. XIAO Junsheng.Study of aerodynamic noise for the vehicle with high speed in the exterior flow.Jilin:Jilin University,2006.(in Chinese)
|
| [12] |
韩忠华,宋文萍,乔志德.基于FW-H方程的旋翼气动声学计算研究[J].航空学报,2003,24(5):400-404.(in Chinese) HAN Zhonghua,SONG Wenping,QIAO Zhide.Aeroa-coustic calculation for helicopter rotor in hover and in forward flight based on FW-H equation[J].Acat Aeronautica et Astronautica Sinica,2003,24(5):400-404.
|
| [13] |
张楠,沈泓萃,姚惠之,等.孔穴流激噪声的计算与验证研究[J].船舶力学,2008,12(5):799-805.(in Chinese) ZHANG Nan,SHEN Hongcui,YAO Huizhi,et al.Validation and calculation of flow-induced noise of cavity[J].Journal of Ship Mechanics,2008,12(5):799-805.(in Chinese)
|