| Citation: | WANG Yan-shuang, ZHU Hai-feng, LIU Zhe. Finite element analysis on temperature field of bearing with shaft[J]. Journal of Aerospace Power, 2012, 27(5): 1146-1152.
|
| [1] |
刘春浩,顾家铭,周赤忠,等.陀螺仪电动机转子轴承研究现状与展望[J].机械工程学报,2006,42(11):17-25. LIU Chunhao,GU Jiaming,ZHOU Chizhong,et al.Research of present state and prospective on gyro-spin bearings[J].Chinese Journal of Mechanical Engineering,2006,42(11):17-25.(in Chinese)
|
| [2] |
宁练,周孑民.滚动轴承内部温度状态监测技术[J].轴承,2007,(2):26-28. NING Lian,ZHOU Jiemin.Research on condition monitoring technique for internal temperature of rolling bearings[J].Bearing,2007,(2):26-28.(in Chinese)
|
| [3] |
葛泉江,闫国斌.某型航空发动机前中介轴承失效分析[J].航空发动机,2007,33(1):42-44. GE Quanjiang,YAN Guobin.Failure analysis of front intermediate bearing for an aero-engine[J].Aeroengine,2007,33(1):42-44.(in Chinese)
|
| [4] |
谢荣华,罗贵火.航空用高速滚动轴承失效分析[J].振动与冲击,2008,27(增刊),131-134. XIE Ronghua,LUO Guihuo.Failure analysis of high speed rolling bearing for aeroending[J].Journal of Vibration and Shock,2008,27(Supplement),131-134.(in Chinese)
|
| [5] |
Liu X L,Jiang M,Yang P.Non-newtonian thermal anlysis of point EHL contacts using the eyring model[J].Journal of Tribology,2005,127(1):70-81.
|
| [6] |
Nicolás J A M,De león Hijes F C G,Alhama F.Solution of temperature fields in hydrodynamics bearing by the numerical network method[J].Tribology International,2006,40(1):139-145.
|
| [7] |
Pouly F,Changenet C.Investigations on the power losses and thermal behaviour of rolling element bearings[J].Journal of Engineering Tribology,2010,224(9):925-933.
|
| [8] |
曹永.混合陶瓷角接触球轴承温度场分布的有限元分析.天冿:天冿大学,2008. CAO Yong.Finite-element analysis for temperature field of hybrid ceramic angular contact ball bearing.Tianjin:Tianjin University,2008.(in Chinese)
|
| [9] |
苏壮,李国权.航空发动机滑油系统断油时主推力球轴承的瞬态热分析[J].航空发动机,2009,35(2):24-27. SU Zhuang,LI Guoquan.Transient thermal analysis of main thrust ball bearing during fuel cut off for aeroengine oil system[J].Aeroengine,2009,35(2):24-27.(in Chinese)
|
| [10] |
Mizuta K J, Inoue T Y.Heat transfer characteristics between inner and outer rings of an angular ball bearing[J].Heat Transfer Asia Research,2003,32(1):42-57.
|
| [11] |
葛世东,梁波,郭向东,等.整体式轴连轴承组合结构:中国,200420075445.8.2006-12-20.
|
| [12] |
邓四二,贾群义,王燕霜.滚动轴承设计原理[M].北京:中国标准出版社,2009.
|
| [13] |
Kannel J W,Barber S A.Estimate of surface temperature during rolling contact[J].Tribology Transaction,1989,32(3):305-310.
|
| [14] |
沈军,马骏,刘伟强.一种接触热阻的数值计算方法[J].上海航天,2002(4):33-36. SHEN Jun,MA Jun,LIU Weiqiang.A numerical calculation method of thermal contact resistance[J].Aerospace Shanghai,2002(4):33-36.(in Chinese)
|
| [15] |
Harris T A.Rolling bearing analysis[M].5th ed.New York:John Wiley & Sons Inc.,2006.
|
| [16] |
焦育洁,吕新生,张锡昌.航空发动机主轴圆柱滚子轴承典型故障分析[J].轴承,2003(12):29-30. JIAO Yujie,LU Xingsheng,ZHANG Xichang.Analysis on typical failure of cylindrical roller bearing used in aero engine[J].Bearing,2003(12):29-30.(in Chinese)
|
| [17] |
Crecelius W J,Pirvics J.Computer program operation manual on “SHABERTH”-a computer program for the analysis of the Steady state and transient thermal performance of shaft-bearing systems.King of Prussia,PA:Engineering and Research Center of SKF Industries,A189240,1976.
|
DownLoad: