| Citation: | PENG Xian-long, FANG Zong-de, SU Jin-zhan, PEI Shan-shan. Theory analysis for application grinding disk in face gear grinding[J]. Journal of Aerospace Power, 2012, 27(5): 1159-1165.
|
| [1] |
Litvin F L.Gear geometry and applied theory[M].New Jersey:PTR Prentice Hall,1994.
|
| [2] |
Bill R C.Summary highlights of the advanced rotorcraft transmission (ART) program.AIAA-1992-3362,1992.
|
| [3] |
Litvin F L,Fuentes A,Howkins M.Design,generation and TCA of new type of asymmetric face gear drive with modified geometry[J].Computer Methods in Applied Mechanics Engineering,2001,190(43-44):5837-5865.
|
| [4] |
Litvin F L,Fuentes A.Gear geometry and applied theory[M].New York:Cambridge University Press,2004.
|
| [5] |
沈云波.面齿轮传动齿面设计理论及插齿技术研究.西安:西北工业大学,2009. SHEN Yunbo.The design theory of tooth surface and technology of gear shaping of face-gear drive.Xi’an:Northwestern Polytechnical University,2009.(in Chinese)
|
| [6] |
Litvin F L,Perez I G,Fuentes A,et al.Design,generation,and stress analysis of face-gear drive with helical pinion[J].Computer Methods in Applied Mechanics and Engineering,2005,194(36-38):3870-3901.
|
| [7] |
赵宁,曾晓春,郭辉,等.斜齿面齿轮齿面仿真及其轮齿接触分析[J].航空动力学报,2008,23(10):1927-1932. ZHAO Ning,ZENG Xiaochun,GUO Hui,et al.Tooth contact analysis of face gear drive with helical pinion and simulation of the tooth face[J].Journal of Aerospace Power,2008,23(10):1927-1932.(in Chinese)
|
| [8] |
郭辉.面齿轮滚齿加工方法及其啮合性能研究.西安:西北工业大学,2009. GUO Hui.Research on hobbing face-gear and gearing performance.Xi’an:Northwestern Polytechnical University,2009.(in Chinese)
|
| [9] |
Stadtfeld H J.Coniface face gear cutting and grinding..http://www.gearsolutions.com/article/detail/6020/coniface-face-gear-cutting-and-grinding.
|
| [10] |
赵宁,曾晓春,郭辉,等.直齿面齿轮修形及承载接触分析[J].航空动力学报,2008,23(11):2142-2146. ZHAO Ning,ZENG Xiaochun,GUO Hui,et al.Modification and loaded contact analysis of spur fa ce gear[J].Journal of Aerospace Power,2008,23(11):2142-2146.(in Chinese)
|
| [11] |
Zanzi C,Pedrero J I.Application of modified geometry of face gear drive[J].Computer Methods in Applied Mechanics and Engineering,2005,194(36-38):3047-3066.
|
| [12] |
Litvin F L,Fuentes A,Zanzi C,et al.Design,generation,and stress analysis of two versions of geometry of face-gear drives[J].Mechanism and Machine Theory,2002,37(10):1179-1211.
|
| [13] |
Litvin F L,Fuentes A,Perez I G,et al.Modified involute helical gears:computerized design,simulation of meshing and stress analysis[J].Computer Methods in Applied Mechanics and Engineering,2003,192(33-34):3619-3655.
|
DownLoad: