| Citation: | YANG Sa, HE Guo-qiang, LI Jiang, LI Qiang, SUN Xiang-yu, HU Shu-fang. EPDM ablation model considering of porous/compact structure of charring layer[J]. Journal of Aerospace Power, 2012, 27(5): 1172-1178.
|
| [1] |
何国强.包覆层烧蚀性能计算及实验分析.西安:西北工业大学,1988. HE Guoqiang.Calculation and analysis of ablation experiment of a liner inhibitor.Xi’an:Northwestern Polytechnical University,1988.(in Chinese)
|
| [2] |
Yang B C.A theoretical study of thermo-mechanical erosion of high-temperature ablatives.PA,USA:University of Pennsylvania,1992.
|
| [3] |
Yang B C,Cheung F B,Koo J H.Modeling of one-dimensional thermomechanical erosion of high temperature ablatives[J].Journal of Applied Mechanics, 1993,60(4):1027- 1032.
|
| [4] |
何洪庆,严红.EPDM的烧蚀模型[J].推进技术,1999,20(4):36-39. HE Hongqing,YANG Hong.Ablation model of EPDM[J].Journal of Propulsion Technology,1999,20(4):36-39.(in Chinese)
|
| [5] |
易法军,孟松鹤,梁军,等.防热复合材料高温体积烧蚀模型[J].哈尔滨工业大学学报,2001,33(6):725-728. YI Fajun,MENG Songhe,LIANG Jun,et al.A high-temperature volumetric ablation model for thermal protective composites[J].Journal of Harbin Institute of Technology,2001,33(6):725-728.(in Chinese)
|
| [6] |
余晓京,何国强,李江,等.富氧环境下绝热层烧蚀模型[J].固体火箭技术,2006,29(2):113-116. YU Xiaojing,HE Guoqiang,LI Jiang,et al.Ablation model of insulation in oxygen-rich environment[J].Journal of Solid Rocket Technology,2006,29(2):113-116.(in Chinese)
|
| [7] |
刘泽祥.绝热材料炭化层制备技术及剥落机理试验研究.西安:西北工业大学,2009. LIU Zexiang.Production technology of char layer of insulator and experimental investigation of erosion mechanism.Xi’an:Northwestern Polytechnical University,2009.(in Chinese)
|
| [8] |
刘洋,丽江,何国强,等.颗粒冲刷条件下三元乙丙绝热材料烧蚀特性实验[J].推进技术,2010,31(5):612-617. LIU Yang,LI Jiang,HE Guoqiang,et al.Experiment on ablation characteristic of EPDM insulator under particles erosion condition[J].Journal of Propulsion Technology,2010,31(5):612-617.(in Chinese)
|
| [9] |
林瑞泰. 多孔介质传热传质引论[M].北京:科学出版社, 1995.
|
| [10] |
杨飒.基于炭层孔隙结构的热化学烧蚀模型研究.西安:西北工业大学,2009. YANG Sa.Thermo-chemical ablation model of ablative materials considering structure of charred layer.Xi’an:Northwestern Polytechnical University,2009.(in Chinese)
|
| [11] |
尹洪峰,徐永东,张立同.热解条件对热解碳沉积模式和形貌的影响[J].无机材料学报,1999,14(5):69-74. YIN Hongfeng,XU Yongdong,ZHANG Litong.Effect of deposition on deposition mode and morphology of pyrolytic carbon[J].Journal of Inorganic Materials,1999,14(5):69-74.(in Chinese)
|
| [12] |
徐善玮,侯晓,张宏安.固体火箭发动机内绝热层烧蚀质量损失计算[J].固体火箭技术,2003,26(3):28-31. XU Shanwei,HOU Xiao,ZHANG Hongan.Calculation of internal insulation ablation mass loss of solid rocket motor[J].Journal of Solid Rocket Technology,2003,26(3):28-31.(in Chinese)
|
DownLoad: