| Citation: | FAN Lin, NING Fang-fei, LIU huo-xing. Quasi-steady flow model of slot-type casing treatments Ⅱ: design optimization of casing treatment for a transonic rotor[J]. Journal of Aerospace Power, 2012, 27(6): 1278-1287.
|
| [1] |
Takata H,Tsukuda Y.Stall margin improvement by casing treatment:its mechanism and effectiveness[J].Journal of Engineering for Power,1977,99(1):121-133.
|
| [2] |
Fujita H,Takata H.A study of configurations of casing treatment for axial flow compressors[J].Bulletin of the JSME,1984,27(230):1675-1681.
|
| [3] |
Smith G D J,Cumpsty N A.Flow phenomena in compressor casing treatment[J].Journal of Engineering for Gas Turbines and Power,1985,106(3):532-541.
|
| [4] |
Azimian A R,Elder R L,McKenzie A B.Application of recess vaned casing treatment to axial flow fans[J].Journal of Turbomachinery,1990,112(1):145-150.
|
| [5] |
Crook A J,Greitzer E M,Tan C S,et al.Numerical simulation of compressor endwall and casing treatment flow phenomena[J].Journal of Turbomachinery,1993,115(3):501-512.
|
| [6] |
Hall E J,Crook A J,Delaney R A.Aerodynamic analysis of compressor casing treatment with a 3-D Navier-Stokes solver .AIAA-94-2796,1994.
|
| [7] |
Wilke I,Kau H P.A numerical investigation of the influence of casing treatments on the tip leakage flow in a hpc front stage .ASME Paper,GT-2002-30642,2002.
|
| [8] |
Wilke I,Kau H P,Brignole G.Numerically aided design of a high-efficient casing treatment for a transonic compressor .ASME Paper GT-2005-68993,2005.
|
| [9] |
Seitz P A.Casing treatment for axial flow compressors .Cambridge,England:Cambridge University,1999.
|
| [10] |
Emmrich R,Honen H,Niehuis R.Time resolved investigations of an axial compressor with casing treatment Part 1:experiment .ASME Paper GT-2007-27581,2007.
|
| [11] |
吴昌明,刘大凯.处理机匣特征参数变化对多级轴流压气机性能的影响[J].航空发动机,1997(1):38-43. WU Changming,LIU Dakai.Influence of characteristic parameters of casing treatment to the performance of multistage compressor[J].Aeroengine,1997(1):38-43.(in Chinese)
|
| [12] |
LU Xingen,CHU Wuli,ZHU Junqiang,et al.Mechanism of the interaction between casing treatment and tip leakage flow in a subsonic axial compressor .ASME Paper GT2006-90077,2006.
|
| [13] |
张燕东,陆亚钧.圆弧斜槽处理机匣的实验研究[J].航空动力学报,1998,13(3):254-258. ZHANG Yandong,LU Yajun.An experimental investigation on arc skewed slot casing treatment[J].Journal of Aerospace Power,13(3):254-258.(in Chinese)
|
| [14] |
祝剑虹,朴英,周建兴,等.跨声压气机缝式处理机匣非定常模拟研究[J].航空动力学报,2008,23(5):882-888. ZHU Jianhong,PIAO Ying,ZHOU Jianxing,et al.Unsteady numerical simulation on transonic compressor with screwed slots casing treatment[J].Journal of Aerospace Power,23(5):882-888.(in Chinese)
|
| [15] |
Prince D C,Jr,Wisler D C,Hilvers D E.A study of casing treatment stall margin improvement phenomena .NASA Report,NASA-CR-134552,1974.
|
DownLoad: