| Citation: | LI Chun-lin, ZHU Hui-ren, BAI Jiang-tao, DU Xiao-qin, ZHOU Lei-sheng. Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs[J]. Journal of Aerospace Power, 2012, 27(6): 1340-1346.
|
| [1] |
林宏镇,汪火光,蒋章焰.高性能航空发动机传热技术[M].北京:国防工业出版社,2005.
|
| [2] |
葛绍岩,徐靖中.气膜冷却[M].北京:科学出版社,1985.
|
| [3] |
Bogard D G,Thole K A.Gas turbine film cooling[J].Journal of Propulsion and Power,2006,22(2):249-270.
|
| [4] |
Hay N,Lampard D,Benmansour S.Effect of cross flows on the discharge coefficient of film cooling holes[J].ASME Journal of Engineering for Power,1983,105(4):791-798.
|
| [5] |
Burd S W,Simon T W.Measurements of discharge coefficients in film cooling[J].ASME Journal of Turbomachinery,1999,121(1):243-248.
|
| [6] |
Colban W,Gratton A,Thole K.Heat transfer and film-cooling measurements on a stator vane with fan-shaped cooling holes[J].Journal of Turbomachinary,2006,128(1):53-61.
|
| [7] |
Goldstein R J,Eckert E R.Effects of hole geometry and density on three-dimensional film cooling[J].International Journal of Heat Mass Transfer,1974,17(2):595-607.
|
| [8] |
Ekkad S V,Huang Y,Han J C.Detailed heat transfer distributions in two pass square channels with rib turbulators and bleed holes[J].International Journal of Heat and Mass Transfer,1998,41(23):3781-3791.
|
| [9] |
Gritsch M,Schulz A,Wittig S.Film cooling holes with expanded exits:near hole heat transfer coefficients[J].International Journal of Heat and Fluid Flow,2000,21(2):146-155.
|
| [10] |
邓宏武,谭艳,王佳仁,等.带交错肋结构涡轮叶片复合通道的实验[J].航空动力学报,2010,25(9):1931-1937. DENG Hongwu,TAN Yan,WANG Jiaren,et al.Experimental study on the turbine blade cooling channel with crossed ribs[J].Journal of Aerospace Power,2010,25(9):1931-1937.(in Chinese)
|
| [11] |
朱剑琴,徐国强,陶智,等.带肋变截面回转通道内流动与传热的数值模拟[J].北京航空航天大学学报,2009,35(1):18-22. ZHU Jianqin,XU Guoqiang,TAO Zhi,et al.Numerical investigation of heat transfer and flow resistance in U-shaped variable crossection channelsw ith different rib heights[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(1):18-22.(in Chinese)
|
| [12] |
姚玉,张靖周,郭文.气膜孔角度对导叶冷却效果影响的数值研究[J].航空动力学报,2009,24(3):508-512. YAO Yu,ZHANG Jingzhou,GUO Wen.Numerical investigation on film cooling effectiveness of stator blade with different angles[J].Journal of Aerospace Power,2009,24(3):508-512.(in Chinese)
|
| [13] |
白江涛,朱惠人,刘存良.内通道交错横流对气膜冷却效率的影响[J].航空动力学报,2008,23(8):1353-1359. BAI Jiangtao,ZHU Huiren,LIU Cunliang.Numerical study of the effect of internal coolant crossflow on film cooling effectiveness[J].Journal of Aerospace Power,2008,23(8):1353-1359.(in Chinese)
|
| [14] |
郭涛,朱惠人,许都纯.带90°肋和双排出流孔通道传热特性的实验[J].航空动力学报,2010,25(10):2249-2254. GUO Tao,ZHU Huiren,XU Duchun.Heat transfer investigation of the channels with 90° rib turbulators and double row bleed holes[J].Journal of Aerospace Power,2010,25(10):2249-2254.(in Chinese)
|
| [15] |
李广超,朱惠人,郭涛.带60°肋和气膜孔矩形通道传热研究[J].航空动力学报,2006,21(6):995-1001. LI Guangchao,ZHU Huiren,GUO Tao.Heat transfer in the rectangular passage with 60-degree ribs and film holes[J].Journal of Aerospace Power,2006,21(6):995-1001.
|
| [16] |
Silieti M,Divo E,Kassab A.The effect of conjugate heat transfer on film cooling effectiveness[J].Numerical Heat Transfer Part B,2010,56(5):335-350.
|
| [17] |
Silieti M,Divo E,Kassab A.Numericalinvestigation of adiabatic and conjugate film cooling effectiveness on a single cylindrical film cooling hole .ASME,IMECE 2004-62196,2004.
|
| [18] |
Kassab A J,Divo E,Heidmann J D,et al.BEM/FVM conjugate heat transfer analysis of a three-dimensional film cooled turbine blade[J].International Journal for Numerical Methods in HeaTransfer and Fluid Flow,2003,13(5):581-610.
|
DownLoad: