| Citation: | JIANG Bin, ZHENG Qun, WANG Song-tao, FENG Guo-tai. Research on three-dimensional design of bowed and swept blade of transonic fan[J]. Journal of Aerospace Power, 2012, 27(8): 1815-1825.
|
| [1] |
Wellborn S R,Robert A D.Redesign of a 12-stage axial-flow compressor using multistage CFD .ASME Paper GT-2001-0351,2001.
|
| [2] |
Gümmer V,Wenger U,Kau H P.Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressor[J].Journal of Turbomachinery,2001,123(1):40-48.
|
| [3] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading Part 1:university research and methods development .ASME Paper GT-2002-30328,2002.
|
| [4] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading Part 2:low and high speed designs and test verification .ASME Paper GT-2002-30329,2002.
|
| [5] |
Brilliant L,Balamucki S,Burger G,et al.Application of multistage CFD analysis to low pressure compressor design .ASME Paper GT-2004-54263,2004.
|
| [6] |
Tubbs H,Rea A.Aerodynamic development of the high pressure compressor for the IAEV 2500 aero engine .ImechEC423ö023,1991.
|
| [7] |
Yamaguchi N,Tominaga T,Hattori S,et al.Secondary-loss reduction by forward-skewing of axial compressor rotor blading //Proceedings of 1991 Yokohama International Gas Turbine Congress.Yokohama:IGTC,1991:61-68.
|
| [8] |
Gümmer V,Wenger U,Kau H P.Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors .ASME Paper 2000-GT-0491,2000.
|
| [9] |
李绍斌,苏杰先,王仲奇.采用高负荷弯曲静叶的压气机改型研究[J].航空动力学报,2006,21(4):741-746. LI Shaobin,SUN Jiexian,WANG Zhongqi.Redesign of a transonic compressor stage using highly loaded bowed stator[J].Journal of Aerospace Power,2006,21(4):741-746.(in Chinese)
|
| [10] |
Braun M,Reume J R.Forward sweep in a four-stage high-speed axial compressor .ASME Paper GT-2006-90218,2006.
|
| [11] |
李绍斌.跨音速压气机高负荷弯、扭静叶设计及其气动性能研究 .哈尔滨:哈尔滨工业大学,2007. LI Shaobin.Design of highly loaded dihedral stator and investigation on the aerodynamic stage performance in an axial transonic compressor .Harbin:Harbin Institute of Technology,2007.(in Chinese)
|
| [12] |
姜斌,王松涛,冯国泰,等.高负荷低压风扇三维气动设计与损失分析[J].航空动力学报,2010,25(2):424-433. JIANG Bin,WANG Songtao,FENG Guotai,et al.Research on three-dimensional aerodynamic design of transonic fan and loss analysis[J].Journal of Aerospace Power,2010,25(2):424-433.(in Chinese)
|
| [13] |
Reid L,Moore R D.Performance of single stage axial flow transonic compressor with rotor and stator aspect ratios of 1119 and 1126,respectively,and with design pressure .NASA2TP21337,1978.
|
| [14] |
Reid L,Moore R D.Performance of single stage axial flow transonic compressor with rotor and stator aspect ratios of 1.19 and 1.26,respectively,and with design pressure ratio of 1.82 .NASA2TP21338,1978.
|
DownLoad: