| Citation: | YANG Xiao-guang, HUANG Jia. Modified reduced model for rapid analysis of tip clearance of high pressure turbine[J]. Journal of Aerospace Power, 2012, 27(9): 2048-2055.
|
| [1] |
Lattime S B,Steinetz B M.Turbine engine clearance control systems:current practices and future directions. NASA/TM-2002-211794,2002.
|
| [2] |
Geisheimer J L,Billington S A,Burgess D W.A microwave blade tip clearance sensor for active clearance control applications. AIAA 2004-3720,2004.
|
| [3] |
Melcher K J,Kypuros J.Toward a fast-response active turbine tip clearance control. NASA/TM-2003-212627,2003.
|
| [4] |
马玉真.旋转叶片叶尖间隙测量的关键技术研究. 天津:天津大学,2006. MA Yuzhen.The key technique research of blade tip clearance measurement for rotational blades. Tianjin:Tianjin University,2006.(in Chinese)
|
| [5] |
房友龙,刘永葆,余又红,等.热和离心力作用下高压涡轮转子的径向变形[J].燃气涡轮试验与研究,2011,24(2):31-35. FANG Youlong,LIU Yongbao,YU Youhong,et al.Radial displacement of HPT rotor caused by the centrifugal and heat[J].Gas Turbine Experiment and Research,2011,24(2):31-35.(in Chinese)
|
| [6] |
漆文凯,陈伟.某型航空发动机高压涡轮叶尖间隙数值分析[J].南京航空航天大学学报,2003,35(1):63-67. QI Wenkai,CHEN Wei.Tip clearance numerical analysis of an aero-engine HPT[J].Journal of Nanjing University of Aeronautics and Astronautics,2003,35(1):63-67.(in Chinese)
|
| [7] |
岂兴明,朴英,祝剑虹,等.某型航空发动机高压涡轮叶顶间隙三维数值分析[J].航空动力学报,2008,23(5):904-908. QI Xingming,PIAO Ying,ZHU Jianhong,et al.3-D numerical analysis of the tip clearance of an aero-engine high pressure turbine[J].Journal of Aerospace Power,2008,23(5):904-908.(in Chinese)
|
| [8] |
张晓波,杨瑞,李其汉.航空发动机涡轮径向间隙设计方法研究[J].航空发动机,2004,30(2):14-18. ZHANG Xiaobo,YANG Rui,LI Qihan.A design method for turbine rotor radial clearance of an aero-engine[J].Aeroengine,2004,30(2):14-18.(in Chinese)
|
| [9] |
Melcher K J,Kypuros J.A reduced model for prediction of thermal and rotational effects on turbine tip clearance. NASA/TM-2003-212226,2003.
|
| [10] |
Bruce M.Steinetz B M,Lattime S B,et al.Preliminary evaluation of an active clearance control system concept. AIAA 2005-3989,2005.
|
| [11] |
Timoshenko S.Theory of elasticity[M].New York:McGraw-Hill Book Company,1970.
|
| [12] |
房友龙,刘永葆,贺星,等.离心力作用下涡轮转子的径向变形[J].舰船电子工程,2011,31(2):177-180. FANG Youlong,LIU Yongbao,HE Xing,et al.Study of the radial elongations of the turbine rotor with the centrifugal effect[J].2011,31(2):177-180.(in Chinese)
|
| [13] |
葛永乐,吕建成.涡轮机高温零件温度场专题文集:第1集[M].北京:国防工业出版社,1982.
|
| [14] |
航空发动机设计手册编委会.航空发动机设计手册:第16 册 空 气 系 统 及 传 热 分 析[M].北 京 :航空工业出版社,2000.
|
| [15] |
张家锋,邹金文,康进武,等.FGH96粉末高温合金涡轮盘淬火过程界面换热系数的研究[J].航空材料学报,2010,30(1):26-29. ZHANG Jiafeng,ZOU Jinwen,KANG Jinwu,et al.Study on surface heat transfer coefficients of FGH96 P/M superalloy disk during heat treatment process[J].Journal of Aeronautical Materials,2010,30(1):26-29.(in Chinese)
|
| [16] |
向安定,罗小强,朱惠人,等.涡轮叶片表面气膜冷却的传热实验研究[J].航空动力学报,2002,17(5):577-581. XIANG Anding,LUO Xiaoqiang,ZHU Huiren,et al.Turbine blade surface heat transfer and film cooling measurements in a turbine cascade with injection on surface[J].Journal of Aerospace Power,2002,17(5):577-581.(in Chinese)
|
| [17] |
Kumada M,Iwata S,Obata M,et al.Tip clearance effect on heat transfer and leakage flows on the shroud-wall surface in an axial flow turbine[J].ASME Journal of Turbomachinery,1994,116(37):39-45.
|
DownLoad: