| Citation: | ZHAO Yun-feng, HU Wen-chao, ZHU Gang, NING Jia-qiang. Calculation of start-up pressure of two-wheel bootstrap air cycle machine with foil air bearing[J]. Journal of Aerospace Power, 2012, 27(9): 2155-2160.
|
| [1] |
Agrawal G L.Foil gas bearing for turbomachinary. Williamsburg USA:The 20th Intersociety Conference on Environmental System,1990.
|
| [2] |
林韶宁,夏葵,李军,等.空气制冷机在飞机空调系统中的应用[J].流体机械,2004,32(10):46-49. LIN Shaoning,XIA Kui,LI Jun.Application of air refrigerator in aircraft air condition system[J].Fluid Machinery,2004 32(10):46-49.(in Chinese)
|
| [3] |
陈元先,杨燕生.悬臂式挠性薄片气体动压径向轴承分析研究[J].航空动力学报,1999,14(2):183-186. CHEN Yuanxian,YANG Yansheng.An analysis of a gas lubricated compliant multileaf journal bearing[J].Joural of Aerospace Power,1999,14(2):183-186.(in Chinese)
|
| [4] |
十合晋一.气体轴承设计、制作与应用[M].韩焕臣,译.北京:宇航出版社,1988.
|
| [5] |
池长青.气体动静压轴承的动力学及热力学[M].北京:北京航空航天大学出版社,2008.
|
| [6] |
陈元先,钱传衢.悬臂式扰性薄片气体动压径向轴承试验研究[J].航空动力学报,1999,19(2):187-190. CHEN Yuanxian,QIAN Chuanqu.Experimental study of a gas lubricated compliant multileaf journal bearing[J].Joural of Aerospace Power,1999,19(2):187-190.(in Chinese)
|
| [7] |
杨利花,石建华,刘恒,等.弹性箔片动压径向气体轴承起飞转速和承载能力的实验研究[J].润滑与密封,2006(3):15-18. YANG Lihua,SHI Jianhua,LIU Heng,et al.The experimental study on the lift off speed and load capacity of compliant aerodynamic foil journal air bearing[J].Lubrication Engineering,2006(3):15-18.(in Chinese)
|
| [8] |
Andre L S,Kim T H.Forced nonlinear response of gas foil bearing supported rotors[J].Tribology International,2008,41(8):704-715.
|
| [9] |
DellaCorte C.A new foil air bearing test rig for use to 700℃ and 70000rpm[J].Tribology International,1998,41(3):335-340.
|
| [10] |
刘占生,许怀锦,张广辉,等.箔片预变形对箔片气体径向轴承静特性影响分析[J].航空动力学报,2009,24(1):181-188. LIU Zhansheng,XU Huaijin,ZHANG Guanghui,et al.Analysis of foil predeformation influence on the static characteristics of bump foil journal bearings[J].Joural of Aerospace Power,2009,24(1):181-188.(in Chinese)
|
| [11] |
耿海鹏,戚社苗,虞烈.有大预紧效应的多叶径向箔片轴承的分析[J].航空动力学报,2006,21(3):569-574. GENG Haipeng,QI Shemiao,YU Lie.Analysis of the multileaf foil journal bearings with large preload effect[J].Joural of Aerospace Power,2006,21(3):569-574.(in Chinese)
|
| [12] |
虞烈,戚社苗,耿海鹏.可压缩气体润滑与弹性箔片气体轴承技术[M].北京:科学出版社,2011.
|
| [13] |
池长清.流体力学润滑[M].北京:国防工业出版社,1998.
|
| [14] |
Meitner P L,Arthur J.Off-design performance loss model for radial turbines with pivoting,variable-area stators. NASA TP-1708,1980.
|
| [15] |
李燕生,陆桂林.向心透平与离心压气机[M].北京:机械工业出版社.
|
| [16] |
Galvas M R.Analytical correlation of centrifugal compressor design geometry for maximum efficiency with specific speed. NASA TN D-6729,1972.
|
DownLoad: