| Citation: | WU Hong, LI Peng, TAO Zhi. Rectangular tooth straight through labyrinth seal analytical model[J]. Journal of Aerospace Power, 2012, 27(10): 2180-2187.
|
| [1] |
徐再清,朱惠人,白江涛.航空发动机篦齿封严特性数值分析[J].机械设计与制造,2008,2(6):31-33. XU Zaiqing,ZHU Huiren,BAI Jiangtao.Numerical analysis of labyrinth seal in aircraft engines[J].Machinery Design & Manufacture,2008,2(6):31-33.(in Chinese)
|
| [2] |
赵海刚,刘振侠.航空发动机篦齿封严特性数值模拟[J].燃气涡轮试验与研究,2010,23(1):26-30. ZHAO Haigang,LIU Zhenxia.Numerical analysis for the performance of straight labyrinth seal of aircraft engine[J].Gas Turbine Experiment and Research,2010,23(1):26-30.(in Chinese)
|
| [3] |
王鹏飞,郭文,刘玉芳.直通式篦齿封严特性的数值分析和试验研究[J].燃气涡轮试验与研究,2009,22(1):32-36. WANG Pengfei,GUO Wen,LIU Yufang.Numerical analysis and experimental investigation of straight-through labyrinth sealing characteristic[J].Gas Turbine Experiment and Research,2009,22(1):32-36.(in Chinese)
|
| [4] |
Ditmann M,Geis T,Schramm V.Discharge coefficients of a preswirl system in secondary air systems[J].Journal of Turbomachinery,2002,124(1):119-124.
|
| [5] |
Denecke J,Farber J,Dullenkopf K.Dimensional analysis and scaling of rotating seals .GT 2005-68676,2005.
|
| [6] |
陶智,徐国强,丁水汀.航空发动机传热学[M].北京:北京航空航天大学出版社,2005.
|
| [7] |
Alexiou A,Mathioudakis K.Secondary air system component modeling for engine performance simulation[J].Journal of Engineering for Gas Turbines and Power,2009,131(5):031202.1-031202.9.
|
| [8] |
Gamal A J M,Vance J M.Labyrinth seal leakage tests:tooth profile,tooth thickness,and eccentricity effects[J].Journal of Engineering for Gas Turbines and Power,2008,130(1):012510.1-012510.11.
|
| [9] |
Miller D S.Internal flow systems[M].2nd ed.Cranfield:British Hydromechanics Research Group Limited,1996.
|
| [10] |
Suryanarayanan S,Morrison G L.Analysis of flow parameters influencing carry-over coefficient of labyrinth seals .GT 2009-59245,2009.
|
| [11] |
Matin H M.Labyrinth packings[M].London:Engineering,ASME,1980.
|
| [12] |
Ding H,Visser F C,Jiang Y.Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industiral applications .FEDSM 2009- 78256,2009.
|
| [13] |
Hodkinson B.Estimation of the leakage through a labyrinth gland //Proceedings of the Institution of Mechanical Engineers.London,Britain:ASME,1939:141:283-288.
|
| [14] |
Suryanarayanan S,Gerald L.Morrison G L.Effect of tooth height,tooth width and shaft diameter on carry-over coefficient of labyrinth seals .GT 2009-59246,2009.
|
| [15] |
Egli A.The leakage steam through labyrinth seals[J].Transaction of ASME,1935,57:115-122.
|
DownLoad: