Volume 27 Issue 10
Oct.  2012
Turn off MathJax
Article Contents
LI Peng, WU Hong, TAO Zhi. Rotating long orifices with radiused inlets analytical model[J]. Journal of Aerospace Power, 2012, 27(10): 2205-2213.
Citation: LI Peng, WU Hong, TAO Zhi. Rotating long orifices with radiused inlets analytical model[J]. Journal of Aerospace Power, 2012, 27(10): 2205-2213.

Rotating long orifices with radiused inlets analytical model

  • Received Date: 2012-03-25
  • Publish Date: 2012-10-28
  • The main subjects are to introduce a new correlation for long orifices with radiused inlets by conducting computational fluid dynamics simulation under complex working conditions,and then,analytical model of long orifices with radiused inlets was developed based on fluid network method,and the model was verified by commercial CFD tool Simerics.It is shown that the model has high precision,it is applicable under complex conditions,and only geometric features are required for one-dimensional modeling.Thus it can be used as a standard model in secondary air system simulation widely.

     

  • loading
  • [1]
    张效伟,朱惠人,张霞.小尺度孔的流量系数试验[J].航空动力学报,2010,25(11):2479-2485. ZHANG Xiaowei,ZHU Huiren,ZHANG Xia.Experiment of discharge coefficients for small scale cylindrical holes[J].Journal of Aerospace Power,2010,25(11):2479-2485.(in Chinese)
    [2]
    郭成富,王秀兰,王勇.倒(圆)角进口圆孔流量系数的试验研究[J].燃气涡轮试验与研究,1997,10(4):10-15. GUO Chengfu.WANG Xiulan,WANG Yong.Experimental investigation on discharge coefficients of cylinder hole with a chamfered or rounding inlet[J].Gas Turbine Experiment and Research,1997,10(4):10-15.(in Chinese)
    [3]
    曹睿,刘艳升,严超宇.垂直锐边孔口的自由出流特性[J].化工学报,2008,59(9):2175-2180. CAO Rui,LIU Yansheng,YAN Chaoyu.Characteristics of vertical sharp-edged orifice discharge [J].Journal of Chemical Industry and Engineering,2008,59(9):2175-2180.(in Chinese)
    [4]
    McGreehan W F,Schotsch M J.Flow characteristics of long orifices with rotation and corner radiusing[J].Journal of Turbomachinery,1988,110(4):213-217.
    [5]
    Idris A,Pullen K R,Read R.The influence of incidence angle on the discharge coefficient for rotating radial orifices .GT2004-53237,2004.
    [6]
    陶智,徐国强,丁水汀.航空发动机传热学[M].北京:北京航空航天大学出版社,2005.
    [7]
    Alexiou A,Mathioudakis K.Secondary air system component modeling for engine performance simulation[J].Journal of Engineering for Gas Turbines and Power,2009,131(5):031202.1-031202.9.
    [8]
    Miller D S.Internal flow systems[M].2nd ed.Cranfield:BHR Group Limited,1996.
    [9]
    Huning M.Comparison of discharge coefficient measurements and correlations for orifices with cross-flow and rotation[J].Jounal of Turbomachinery,2010,132:031017.1-031017.10.
    [10]
    JIANG Yu,Furmanczyk M.A three-dimensional design tool for crescent oil pumps .Warrendale:SAE,2008-1-0003,2008.
    [11]
    Parker D M,Kercher D M.An enhanced method to compute the compressible discharge coefficient of thin and long orifices with inlet corner radiusing[J].Heat Transfer in Gas Turbine Engines,1991,188(1):156-163.
    [12]
    Meyfarth P F,Shine A J.Experimental study of flow through moving orifices[J].Basic Engrneering,1965,87(1):1082-1083.
    [13]
    Alvi S H,Sridharan K.Loss characteristics of orifices and nozzles[J].Journal of Fluids Engineering.1978,100:299-307.
    [14]
    Lichtarowitz A,Duggins R K.Discharge coefficients for incompressible noncavitating flow through long orifices[J].Journal of Mechanical Engineering Science,1965,7(2):210-219.
    [15]
    Hay N,Spencer A.Discharge coefficients of cooling holes with radiused and chamfered inlets[J].Journal of Turbomachinery,1992,114(4):701-706.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1676) PDF downloads(558) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return