| Citation: | LIU Yang, JIN Jie, WANG Hui-ru, YANG Mao-lin. Experiment on combustion characteristics of novel variable geometry flame-holder[J]. Journal of Aerospace Power, 2012, 27(10): 2214-2221. |
| [1] |
高歌,宁榥.沙丘驻涡火焰稳定性的理论及试验研究[J].工程热物理学报,1982,3(1):89-95. GAO Ge,NING Huang.Theoretical and experimental study in stability of the barchan dune vortex flame[J].Journal of Engineering Thermophysics,1982,3(1):89-95.(in Chinese)
|
| [2] |
杨茂林,全中,白兴艳,等.尾缘吹气式火焰稳定器试验研究[J].航空动力学报,1998,13(2):185-188. YANG Maolin,QUAN Zhong,BAI Xingyan,et al.Experimental investigation on EBMC flame-holder[J].Journal of Aerospace Power,1998,13(2):185-188.(in Chinese)
|
| [3] |
张洪滨,王纪根.双V型火焰稳定器的研制和应用[J].推进技术,1994,15(1):38-43. ZHANG Hongbin,WANG Jigen.Development and application of double V type flame stabilizer[J].Journal of Propulsion Technology,1994,15(3):38-43.(in Chinese)
|
| [4] |
韩启祥,刘洪,王方,等.开孔沙丘驻涡火焰稳定器总压损失的试验研究[J].推进技术,1999,20(4):82-85. HAN Qixiang,LIU Hong,WANG Fang,et al.Experimental investigation on total pressure loss of vortex flame holder with holes[J].Journal of Propulsion Technology,1999,20(4):82-85.(in Chinese)
|
| [5] |
刘鸿,王方,王家骅.特种V型蒸发式火焰稳定器的低压性能试验研究[J] 江苏工业学院学报,2004,15(1):12-14. LIU Hong,WANG Fang,WANG Jiahua.Experimental study of the performance of special evaporating V-gutter flame-holder at low pressure[J].Journal of Jiangsu Polytechnic University,1999,32(4):82-85.(in Chinese)
|
| [6] |
郑殿峰,张会强,林文漪,等.带U型槽射流缝隙式稳定器燃烧性能的试验研究[J].航空动力学报,2003,18(6):808-812. ZHENG Dianfeng,ZHANG Huiqiang,LIN Wenyi,et al.Experimental investigation of combustion performance of U-type flame holder[J].Journal Of Aerospace Power,2003,18(6):808-812.(in Chinese)
|
| [7] |
杜一庆.高温、低阻、高效加力燃烧室火焰稳定器机理研究 .武汉:华中科技大学,2005. DU Yiqing.Mechanism investigation on aircraft afterburner flameholder of high efficiency,low drag and high temperature resistance .Wuhan:Huazhong University of Science and Technology,2005.(in Chinese)
|
| [8] |
Eugene L,Caleb N C,John T C,et al.Novel carbureted flame holder for improved afterburner stability .AIAA 2008-98,2008.
|
| [9] |
Eric C,Rrederic P E,Gerard E A J.Variable geometry flame retention device for turbomachine after-burner:UK,GB2264554A .1993-01-09.
|
| [10] |
Robert H R,Bruno G L,Jack L R.Element de montage d'aubes:France,FR2522362A1, .1983-02-22.
|
| [11] |
Richard R,Charles T S,Arthur P A.Ispositif de montage d'aube a pas variable:France,FR2312673A1, .1976-05-26.
|
| [12] |
Jean G,Marc F B,Denis J M.Disposltlf de reglage de la perte de charge d'au moins un des flux dans un turboreacteur multiflux:Europeen,EP0094296A1, .1983-03-05.
|
| [13] |
LIU Yang,JIN Jie,WANG Huiru,et al.Experiment of drag characteristics of a novel variable geometry flame-holder[J].Journal of Aerospace Power.2011,26(11):2485-2494.
|
| [14] |
顾善建,杨茂林,吴继平,等.油珠在火焰稳定器表面的溅跳雾化及集油率测量[J].推进技术,1987,8(5):27-34. GU Shanjian,YANG Maolin,WU Jiping,et al.Splashing atomization and collecting rate measurement of fuel droplets on flameholder[J].Journal of Propulsion Technology,1987,8(5):27-34.(in Chinese)
|
| [15] |
杨茂林,黄勇,顾善建,等.燃油在稳定器尾缘的二次雾化研究[J]航空动力学报,1992,7(1):61-64. YANG Maolin,HUANG Yong,GU Shanjiang,et al.Study on secondary atomization of liquid fuel at the lip of the flameholder[J].Journal of Aerospace Power,1992,7(1):61-64.(in Chinese)
|