| Citation: | WANG Zhen-wei, ZHU Hui-ren, ZHANG Zong-wei, MENG Qing-kun. Effect of trench hole depth and momentum flux ratio on film cooling characteristics[J]. Journal of Aerospace Power, 2012, 27(11): 2455-2461.
|
| [1] |
Lu Y P, Dhungel A,Ekkad S V,et al.Effect of trench width and depth on film cooling from cylindrical holes embedded in trenches [R].ASME Paper GT-2007-27388,2007.
|
| [2] |
Dorrington J S,Bogard D G,Bunker R S.Film effectiveness performance for coolant holes embedded in various shallow trench and crater depressions [R].ASME Paper GT-2007-27992,2007.
|
| [3] |
Waye S K,Bogard D G.High resolution film cooling effectiveness measurements of axial holes embedded in a transverse trench with various trench configurations [R].ASME Paper GT-2006-90226,2006.
|
| [4] |
Bunker R S.Film cooling effectiveness due to discrete holes within a transverse surface slot [R].ASME Paper GT-2002-30178,2002.
|
| [5] |
Lu Y P,Nasir H,Ekkad S V.Film cooling from a row of holes embedded in transverse slots [R].ASME Paper GT-2005-68598,2005.
|
| [6] |
Lu Y P,Srinath V.Predictions of film cooling from cylindrical holes embedded in trenches [R].AIAA-2006-3401,2006.
|
| [7] |
Lu Y P,Dhungel A,Ekkad S V,et al.Film cooling measurements for cratered cylindrical inclined holes [R].ASME Paper GT-2007-27386,2007.
|
| [8] |
Wang T,Chintalapati S,Bunker R S,et al.Jet mixing in a slot[J].Experimental Thermal and Fluid Science,2000,22(1):1-17.
|
| [9] |
Liu C L,Zhu H R,Bai J T,et al.Film cooling performance of converging-slot holes with different exit-entry area ratios [R].ASME Paper GT-2009-59002,2009.
|
| [10] |
Drost U,Bolcs A,Hoffs A,Utilization of the transient liquid crystal technique for film cooling effectiveness and heat transfer investigations on a flat plane and a turbine airfoil [R].ASME Paper 97-GT-026,1997.
|
| [11] |
张宗卫,朱惠人,杜小琴,等.带60°肋和出流孔的矩形通道端壁换热特性研究[J].西安交通大学学报,2010,44(5):116-119. ZHANG Zongwei,ZHU Huiren,DU Xiaoqin,et al.Investigations of endwall heat transfer in the rectangular passage with 60-degree ribs and suction holes[J].Journal of Xi'an Jiaotong University,2010,44(5):116-119.(in Chinese)
|
| [12] |
张宗卫,朱惠人,王振伟,等.出流孔位置对带肋矩形通道换热特性的影响[J].推进技术,2011,32(4):581-585. ZHANG Zongwei,ZHU Huiren,WANG Zhenwei,et al.Influence of bleed hole location on heat transfer in rectangular channels with ribs[J].Journal of Propulsion Technology,2011,32(4):581-585.(in Chinese)
|
| [13] |
刘存良,朱惠人,白江涛,等.基于瞬态液晶全表面测量技术的圆柱形孔气膜冷却特性研究[J].航空动力学报,2009,24(9):1959-1965. LIU Cunliang,ZHU Huiren,BAI Jiangtao,et al.Experimental research on film cooling characteristics of cylindrical hole with transient liquid crystal measurement technique[J].Journal of Aerospace Power,2009,24(9):1959-1965.(in Chinese)
|
| [14] |
郭涛,朱惠人,许都纯,等.热色液晶瞬态测量全表面换热系数的技术研究[J].测控技术,2006,25(9):789-795. GUO Tao,ZHU Huiren,XU Duchun,et al.Research on transient measurement of heat transfer coefficient distribution with liquid crystal technique[J].Measurement and Control Technology,2006,25(9):789-795.(in Chinese)
|
| [15] |
梁卫颖,朱惠人,郭涛,等.利用液晶瞬态技术测量离散缝的气膜加热效率及换热系数[J].西北工业大学学报,2006,24(4):501-504. LIANG Weiying,ZHU Huiren,GUO Tao,et al.New transient state measurements of film heated effectiveness and heat transfer coefficients of the discrete slots with liquid crystal technique[J].Journal of Northwestern Polytechnical University,2006,24(4):501-504.(in Chinese)
|
DownLoad: