| Citation: | YUAN Hua-cheng, TENG Jian, GUO Rong-wei. Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling[J]. Journal of Aerospace Power, 2012, 27(11): 2468-2474.
|
| [1] |
William H H,David T P.Hypersonic air breathing propulsion[M].Washington, D C:AIAA Education Series,1994.
|
| [2] |
Van Wie D M,Kwok F T,Walsh R F.Starting characteristics of supersonic inlets [R].AIAA-96-2914,1996.
|
| [3] |
梁德旺,袁化成,张晓嘉,等.影响高超声速进气道起动能力的因素分析[J].宇航学报,2006,27(4):714-719. LIANG Dewang,YUAN Huacheng,ZHANG Xiaojia,et al.Research on the effects of start ability of hypersonic inlet[J].Journal of Astronautics,2006,27(4):714-719.(in Chinese)
|
| [4] |
袁化成,梁德旺.典型高超声速侧压式进气道的不起动特性分析[J].南京航空航天大学学报,2004,36(6):683-687. YUAN Huacheng,LIANG Dewang.Analysis of characteristics of unstart performance for a hypersonic side-wall inlet model[J].Journal of Nanjing University of Aeronautics & Astronautics,2004,36(6):683-687.(in Chinese)
|
| [5] |
Bouchez M,Falempin F.Air breathing space launcher interest of a fully variable geometry propulsion system status 1999 [R].AIAA-99-2376,1999.
|
| [6] |
Mrozinski D P,Hayes J R.Numerical and experimental analysis of a hypersonic variable geometry inlet [R].AIAA-99-0899,1999.
|
| [7] |
Huebner L D,Rock K E,Ruf E G,et al.Hyper-X flight engine ground testing for X-43 flight risk reduction [R].AIAA-2001-1809,2001.
|
| [8] |
Falempin F,Wendling E,Goldfeld M,et al.Experimental investigation of starting process for a variable geometry air inlet operating from Mach 2 to Mach 8 [R].AIAA-2006-4513,2006.
|
| [9] |
Kojima T,Taguchi T H,Aoki K,et al.Development study of the air-intake of the ATREX engine [R].AIAA-2003-7042,2003.
|
| [10] |
Keiichi O,Hideyuki T,Takayuki K,et al.Numerical analysis of variable intake and nozzle for hypersonic engine [R].AIAA-2003-7069,2003.
|
| [11] |
严红明,钟兢军,杨凌,等.组合发动机可调进气道气动性能[J].航空动力学报,2011,26(2):458-467. YAN Hongming,ZHONG Jingjun,YANG Ling,et al.Aerodynamic characteristics research on variable geometry inlet of combined cycle engine[J].Journal of Aerospace Power,2011,26(2):458-467.(in Chinese)
|
| [12] |
金志光,张堃元.宽马赫数范围高超声速进气道伸缩唇口式变几何方案[J].宇航学报,2010,31(5):1503-1510. JIN Zhiguang,ZHANG Kunyuan.A variable geometry scramjet inlet with a translating cowl operating in a large Mach number range[J].Journal of Astronautics,2010,31(5):1503-1510.(in Chinese)
|
| [13] |
袁化成,刘大,梁德旺,等.变唇口对高超声速进气道性能的影响 新疆:第二届全国冲压发动机会议,2007.
|
| [14] |
袁化成.矩形截面高超声速变几何进气道设计方法及气动特性研究 [D].南京:南京航空航天大学,2008. YUAN Huacheng.Designing methodology and flow characteristic of hypersonic variable geometry inlet with rectangular section [D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.(in Chinese)
|
| [15] |
袁化成,郭荣伟.矩形截面高超声速进气道气动设计及实验验证[J].南京航空航天大学学报,2009,41(4):423-428. YUAN Huacheng,GUO Rongwei.Design and experimental verification of hypersonic inlet with rectangular section[J].Journal of Nanjing University of Aeronautics and Astronautics,2009,41(4):423-428.(in Chinese)
|
DownLoad: