| Citation: | YU Li, LI Guo-quan. Calculatation method of bearing chamber pressure for aero-engine throttling vent lubrication system[J]. Journal of Aerospace Power, 2012, 27(11): 2616-2621.
|
| [1] |
林基恕,张振波.21世纪航空发动机动力传输系统的展望[J].航空动力学报,2001,16(2):108-114. LIN Jishu,ZHANG Zhenbo.Prospects of aeroengine power transmission system in the 21st century[J].Joumal of Aerospace Power,2001,16(2):108-114.(in Chinese)
|
| [2] |
林基恕.高性能涡轮发动机润滑系统设计[J].燃气涡轮试验与研究,2003,16(1):7-9,17. LIN Jishu.Design of high performance turbo-engine lubrication systems[J].Gas Turbine Experiment and Research,2003,16(1):7-9,17.(in Chinese)
|
| [3] |
李国权,史妍妍,曹家梅.航空发动机传动腔压力计算方法的探讨.沈阳:辽宁省航空学会动力装置专业第十五届学术交流会,2000.
|
| [4] |
史妍妍.某型发动机润滑系统腔压计算与三维两相流动分析 [D].沈阳:东北大学,2009. SHI Yanyan.Calculation and analyse on the gas-liquid two-phase 3-D flow of chamber pressure for an aeroengine lubrication system [D].Shangyang:Northeastern University,2009.(in Chinese)
|
| [5] |
邢宗文.流体力学基础[M].西安:西北工业大学出版社,1992.
|
| [6] |
林基恕,航空燃气涡轮发动机机械系统设计[M].北京:航空工业出版社,2005.
|
| [7] |
Vermes G A.Fluid mechanics approach to the labyrinth seal leakage problem[J].ASME Journal of Engineering for Power,1961,83(2):161-169.
|
| [8] |
Miller D S.Internal flow systems[M].Britain:British Hydromechanics Research Association,1970.
|
| [9] |
纪国剑.航空发动机典型篦齿封严泄漏特性的数值和实验研究 [D].南京:南京航空航天大学,2008. JI Guojian.Numerical and experimental investigation of sealing characteristics on typical labyrinth seals in aeroengine [D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.(in Chinese)
|
| [10] |
Glahn A,Kurreck M,Willmann M,et al.Feasibility study on oil droplet flow investigations inside aero engine bearing chambers-PDPA techniques in combination with numerical approaches[J].Journal of Engineering for Gas Turbines and Power,1996,118(10):749-755.
|
| [11] |
Flouros M.Analytical and numerical simulationg of the two-phase flow heat transfer in the vent and seavenge pipes of the CIEAN engine demonstrator[J].Journal of Turbomachinery,2010,132(1):011008.1-011008.15.
|
| [12] |
Rodkey S C,Heister S D, Collicott S H.Physics of gas tubine engine bearing chambers [R].AIAA-2007-5033,2007.
|
| [13] |
葛治美,韩振兴,张恩和,等.航空发动机轴承腔热分析计算[J].航空动力学报,2005,20(3):483-486. GE Zhimei,HAN Zhenxing,ZHANG Enhe,et al.Thermal analysis of aeroengine bearing compartment[J].Journal of Aerospace Power,2005,20(3):483-486.(in Chinese)
|
| [14] |
方弘毅,徐让书,王娟娟.航空发动机轴承腔内油气两相分布数值计算[J].沈阳航空工业学院学报,2010,27(5):14-17. FANG Hongyi,XU Rangshu,WANG Juanjuan.Numerical simulation of two-phase air/oil distribution in aero-engine bearing chamber[J].Journal of Shenyang Institute of Aeronautical Engineering,2010,27(5):14-17.(in Chinese)
|
| [15] |
田文正,李国权.某型机滑油发动通风节流嘴流量-阻力特性试验研究[J].航空发动机,2010,36(5):56-58. TIAN Wenzheng,LI Guoquan.Experimental study of choke flow-drag characteristics for an aeroengine lubrication throttling vent system[J].Aeroengine,2010,36(5):56-58.(in Chinese)
|
DownLoad: