| Citation: | SU Jin-zhan, FANG Zong-de. Optimization design and test of stability of contact patterns of spiral bevel gears[J]. Journal of Aerospace Power, 2012, 27(11): 2622-2628.
|
| [1] |
Baxter M L.Effect of misalignment on tooth action of bevel and hypoid gears [R].ASME Paper 61-MD-20,1982.
|
| [2] |
王小椿,吴序堂.空间点啮合齿面的接触特性对安装误差的敏感性分析[J].西安交通大学学报,1990,24(6):45-57. WANG Xiaochun,WU Xutang.Sensitivity of the contact characteristics of skew point contact surfaces to the mounting errors[J].Journal of Xi'an Jiaotong University,1990,24(6):45-57.(in Chinese)
|
| [3] |
徐晓俊,唐德成,高业田,等.失配点啮合齿面的安装误差敏感特性[J].哈尔滨工业大学学报,1994,26(5):113-117. XU Xiaojun,TANG Decheng,GAO Yetian,et al.The assembling error sensitivity of conjugaged tooth surfaces with point contact[J].Journal of Habin Institute of Thecnology,1994,26(5):113-117.(in Chinese)
|
| [4] |
Litvin F L,Chen J S,Sep T M,et al.Computerized simulation of transmission errors and shift of bearing contact for face-milled hypoid gear drive[J].Journal of Mechanical Design,1995,117(2):262-268.
|
| [5] |
Fuentes A,Litvin F L,Mullins B R,et al.Design and stress analysis of low-noise adjusted bearing contact spiral bevel gears[J].Journal of Mechanical Design,2002,124(3):524-532.
|
| [6] |
吴训成,毛世民,吴序堂.点接触齿面的安装误差敏感性研究[J].中国机械工程,2000,11(5):700-703. WU Xuncheng,MAO Shimin,WU Xutang.Research on the error sensitivity of point-contact tooth surfaces with respecte to the mounting errors[J].China Mechanical Engineering,2000,11(5):700-703.(in Chinese)
|
| [7] |
吴训成,毛世民,吴序堂.点接触齿面在控制误差敏感性条件下的二阶参数设计[J].西安交通大学学报,1999,33(11):86-89. WU Xuncheng,MAO Shimin,WU Xutang.Effect of second-order parameters on design for point-contact tooth surface by controlling error sensitivity[J].Journal of Xi'an JiaoTong University,1999,33(11):86-89.(in Chinese)
|
| [8] |
吴训成,毛世民,吴序堂.点啮合齿面主动设计研究[J].机械工程学报,2000,36(4):70-72. WU Xuncheng,MAO Shimin,WU Xutang.Study on the function-oriented design of point contact tooth surface[J].Chinese Journal of Mechanical Engineering,2000,36(4):70-72.(in Chinese)
|
| [9] |
Simion V V.Machine-tool settings to reduce the sensitivity of spiral bevel gears to tooth errors and misalignments[J].Journal of Mechanical Design,2008,130(8):082603.1-082603.10.
|
| [10] |
唐进元,杜晋.考虑安装误差敏感性的螺旋锥齿轮主动设计方法[J].中国机械工程,2009,20(10):1197-1201. TANG Jinyuan,Du Jin.Active design method of spiral bevel gears considering mounting error sensitivity[J].China Mechanical Engineering,2009,20(10):1197-1201.(in Chinese)
|
| [11] |
唐进元,雷国伟,杜晋.螺旋锥齿轮安装误差敏感性与容差性研究[J].航空动力学报,2009,24(8):1878-1885. TANG Jinyuan,LEI Guowei,DU Jin,et al.Research on alignment error sensitivity and tolerance limit analysis of spiral bevel gears[J].Journal of Aerospace Power,2009,24(8):1878-1885.(in Chinese)
|
| [12] |
Argris J,Fuentes A,Litvin F L.Computerized integrated approach for design and stress analysis of spiral bevel gears[J].Computer Methods in Applied Mechanics and Engineeing,2002,191(11/12):1057-1095.
|
DownLoad: