Volume 27 Issue 11
Nov.  2012
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2012  >  27(11): 2629-2634
WU Cong, LI Da-qing, WEI Bing-yang. Meshing performance of face gear drive based on pinion asymmetric double crowned[J]. Journal of Aerospace Power, 2012, 27(11): 2629-2634.
Citation: WU Cong, LI Da-qing, WEI Bing-yang. Meshing performance of face gear drive based on pinion asymmetric double crowned[J]. Journal of Aerospace Power, 2012, 27(11): 2629-2634.
shu

Meshing performance of face gear drive based on pinion asymmetric double crowned

  • 1.

    School of Mechanical and Electronic Engineering, Henan University of Science and Technology, Luoyang Henan 471003, China

  • 2.

    School of Mechanical Engineering, Jiangsu University, Zhenjiang Jiangsu 212012, China

  • Received Date: 2011-11-14
  • Publish Date: 2012-11-28
    Abstract
  • A new modification method for face gear was proposed as the pinion double crowned.The derivations of surface equations of tooth modified pinion and face-gear were obtained respectively.The meshing performance investigation of the local conjugate face-gear pair was presented after the tooth contact anlysis was achieved taking the assembly errors into consideration.Finally,the calculated examples show that it enables the transmission errors to form a parabolic function,and enables the direction of contact path and the magnitude of transmission errors to get good control while the factors are pre-designed.The meshing performance of the local conjugate gear pair can obtain an anticipating controllability by using this method,which is quite important for restraining the edge contact,vibration and noise of face gear drive.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1]
    Litvin F L.Gear geometry and applied theory[M].Cambridge:Cambridge University Press,1994.
    [2]
    Litvin F L,Egelja A.Handbook on face gear drives with a spur involute pinion[J].NASA/CR-2000-209909,2000.
    [3]
    Litvin F L.Transaction of the ASME[J].Journal of Mechanical Desing,1994,116:672-676.
    [4]
    Litvin F L,Zhang Y,Wang J C.Design and geometry of face-gear drive[J].Journal of Mechanical Design,1992,114(4):642-647.
    [5]
    沈小星,周云飞,李左章,等.螺旋锥齿轮点接触齿面生成法[J].中国机械工程,1999,10(7):796-798. SHEN Xiaoxing,ZHOU Yunfen,LI Zuozhang,et al.Design of local conjugate surface of spiral bevel gears[J].China Mechanical Engineering,1999,10(7):796-798.(in Chinese)
    [6]
    王延忠,熊巍,张俐,等.面齿轮齿面方程及其轮齿接触分析[J].机床与液压,2007,3(12):7-9. WANG Yanzhong,XIONG Wei,ZHANG Li,et al.Tooth surface equations and tooth contact analysis of face gear[J].Machine & Hydraulics,2007,3(12):7-9.(in Chinese)
    [7]
    Litvin F L,Fuentes A,Zanza C,et al.Design,generation,and stress analysis of two versions of geometry of face gear drives[J].Mechanism and Machine Theory,2002,37(10):1179-1211.
    [8]
    Litvin F L,Fuentes A,Howkins M.Design,generation and TCA of new type of asymmetric face-gear drive with modified geometry[J].Comput. Meth. Appl. Mech. Engrg.,2001,190(43/44):5837-5865.
    [9]
    赵宁,郭辉,方宗德,等.直齿面齿轮修形及承载接触分析[J].航空动力学报,2008,23(11):2142-2146. ZHAO Ning,GUO Hui,FANG Zongde,et al.Modification and loaded contact analysis of spur face gears[J].Journal of Aerospaces Power,2008,23(11):2142-2146.(in Chinese)
    [10]
    沈云波,方宗德,赵宁,等.齿廓方向修形的斜齿面齿轮啮合特性研究[J].中国机械工程,2008,19(18):2219-2222. SHEN Yunbo,FANG Zongde,ZHAO Ning,et al.Meshing performance of modified face gear drive with helical pinion in the profile driction[J].China Mechanical Engineering,2008,19(18):2219-2222.(in Chinese)
    [11]
    袁野.齿轮噪声与齿轮修形[J].机械研究与应用,2006,19(5):7-8. YUAN Ye.The study of gear yawps and gear profiling[J].Mechanical Research & Application,2006,19(5):7-8.(in Chinese)
    [12]
    沈云波,方宗德,赵宁,等.斜齿面齿轮几何传动误差的设计[J].航空动力学报,2008,23(11):2147-2152. SHEN Yunbo,FANG Zongde,ZHAO Ning,et al.Design of geometry transmission errors of helical face gear drive[J].Journal of Aerospaces Power,2008,23(11):2147-2152.(in Chinese)
    [13]
    苏进展,方宗德,催艳梅.弧线齿面齿轮齿面接触分析[J].航空学报,2011,32(3):546-551. SU Jinzhan,FANG Zongde,CUI Yanmei.Tooth contact analysis on face gears with arcuate tooth [J].Acta Aeronautica et Astronautica Sinica,2011,32(3):546-551.(in Chinese)
    [14]
    苏进展,方宗德,曹雪梅.成形法加工的弧线齿面齿轮几何接触分析[J].航空动力学报,2010,25(6):1427-1431. SU Jinzhan,FANG Zongde,CAO Xuemei.Tooth contact analysis of face gear drive with curvilinear shaped tooth by format cutting[J].Journal of Aerospaces Power,2010,25(6):1427-1431.(in Chinese)
    [15]
    赵宁,曾晓春,郭辉,等.斜齿面齿轮齿面仿真及其轮齿接触分析[J].航空动力学报,2008,23(10):1927-1932. ZHAO Ning,ZENG Xiaochun,GUO Hui,et al.Tooth contact analysis of face gear drive with helical pinion and simulation of the tooth face[J].Journal of Aerospaces Power,2008,23(10):1927-1932.(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(835.0KB)
    XML

    Article Metrics

    Article views (1748) PDF downloads(487) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return