| Citation: | YU Chun-hua, JIANG Hong-de, YUAN Wei, LI Shao-bin. Effect of hub rotation on conner flow field of an annular cascade[J]. Journal of Aerospace Power, 2012, 27(12): 2792-2798.
|
| [1] |
Dong Y,Gallimore S J,Hodson H P.Three-dimensional flows and loss reduction in axial compressors[J].ASME Journal of Turbomachinery,1987,109(3):354-361.
|
| [2] |
Schultz H D,Gallus H E,Lakshminarayana B.Three-dimensional separated flow field in the endwall region of an annular compressor cascade in the presence of rotor-stator interaction:Part 1 quasi-steady flow field and comparison with steady state data[J].ASME Journal of Turbomachinery,1990,112(4):669-678.
|
| [3] |
Friedrichs J,Baumgarten S,Kosyna G,et al.Effect of stator design on stator boundary layer flow in a highly loaded single-stage axial flow low-speed compressor[R].ASME Paper 2000-GT-616,2000.
|
| [4] |
Peter L J.Influence of a moving end wall on the tip clearance vortex in an axial compressor cascade[R].AFIT/GAE/ENY/95D-19,1995.
|
| [5] |
Doukelis A,Mathioudakis K,Papailios K.The effect of tip clearance gap size and end wall rotation on the performance of a high-speed annular compressor cascade[R].ASME Paper 98-GT-38,1998.
|
| [6] |
Wang Y.Tip leakage flow downstream of a compressor cascade with moving end wall[D].Virginia US:Virginia Polytechnic Institute and State University,2000.
|
| [7] |
贾希诚,王正明,王嘉炜.叶轮机械中的泄漏流与泄漏涡[J].工程热物理学报,2003,24(5):753-756.JIA Xicheng,WANG Zhengming,WANG Jiawei.Leakage flow and leakage vortex in turbomachinery[J].Journal of Engineering Thermophysics,2003,24(5):753-756.(in Chinese)
|
| [8] |
周正贵.模拟叶尖间隙流的转动平面叶栅实验方案[J].南京航空航天大学学报,2002,34(2):182-185.ZHOU Zhenggui.Development of rotating linear cascade facility for simulating blade tip clearance flow[J].Journal of Nanjing University of Aeronautics & Astronautics,2002,34(2):182-185.(in Chinese)
|
| [9] |
吴艳辉,楚武利,刘志伟.移动壁对压气机叶栅间隙流动的影响[J].航空动力学报,2006,21(1):112-118.WU Yanhui,CHU Wuli,LIU Zhiwei.Influence of moving end-wall on tip clearance flow in an axial-flow compressor cascade[J].Journal of Aerospace and Power,2006,21(1):112-118.(in Chinese)
|
| [10] |
Yaras M I,Sjolander S A.Efects of simulated rotation on tip leakage in a planar cascade of turbine blades:Part Ⅰ tip gap flow[J].ASME Journal of Turbomachinery,1992,114(3):652-659.
|
| [11] |
Khalid S A.The effects of tip clearance on axial compressor pressure rise[D].Massachusetts:Massachusetts Institute of Technology,1995.
|
| [12] |
余春华.轴流压气机端壁区非定常流场时空结构改善途径探索[D].北京:北京航空航天大学,2008.YU Chunhua.Investigation on methods for improving end-wall unsteady space-time flow field in axial flow compressors[D].Beijing:Beijing University of Aeronautics and Astronautics,2008.(in Chinese)
|
| [13] |
余春华,陆亚钧,李秋实,等.处理轮毂转速的实验研究[J].实验流体力学,2009,23(2):20-25.YU Chunhua,LU Yajun,LI Qiushi,et al.Experimental investigation on hub treatment rotation speed[J].Journal of Experiments in Fluid Mechanics,2009,23(2):20-25.(in Chinese)
|
| [14] |
张华良.采用叶片弯/掠及附面层抽吸控制扩压叶栅内涡结构的研究[D].哈尔滨:哈尔滨工业大学,2007.ZHANG Hualiang.Investigation on application of dihedral/swept blade and boundary layer suction to control vortex configurations in compressor cascades[D].Harbin:Harbin Institute of Technology,2007.(in Chinese)
|
| [15] |
Gbadebo S A,Cumpsty N A,Hynes T P.Interaction of tip clearance flow and three-dimensional separation in axial compressor[R].ASME Paper 2006-GT-90071,2006.
|
DownLoad: