| Citation: | WANG Ming-hai, LI Xiao-peng. Effect of curvature attribute of free-form surface on CNC milling process[J]. Journal of Aerospace Power, 2013, 28(1): 25-31.
|
| [1] |
李海滨,余颖婷.叶片数控加工关键技术的研究[J].机床与液压,2010,38(11):14-17. LI Haibin,YU Yingting.Research on the key technologies of blade's NC machining[J].Journal of Machine Tool and Hydraulics,2010,38(11):14-17.(in Chinese)
|
| [2] |
刘维伟,张定华,史耀耀,等.航空发动机薄壁叶片精密数控加工技术研究[J] .机械科学与技术,2004,23(3):331-334. LIU Weiwei,ZHANG Dinghua,SHI Yaoyao,et al.Study on net-shape NC machinging technology of thin-balde of aeroengine[J].Journal of Mechanical Science and Technology,2004,23(3):331-334.(in Chinese)
|
| [3] |
《透平机械现代制造技术丛书》委员会.叶片制造技术[M].北京:科学出版社,2002:8-12.
|
| [4] |
李正强,陈志同,肖俊.鼓形刀宽行刀位优化纬线分割算法[J] .北京航空航天大学学报,2007,33(6):731-735. LI Zhengqiang,CHEN Zhitong,XIAO Jun.Latitude distribution algorithm of cutter position optimization on drum-like cutter for strip-maxim ization[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(6):731-735.(in Chinese)
|
| [5] |
Ding S,Mannan M A,Poo A N,et al.Adaptive iso-planar tool path generation for machining of free-form surface[J].Computer-Aided Design,2003,35(2):141-153.
|
| [6] |
金曼,张俐,陈志同.圆环面刀具五坐标加工端点误差控制刀位优化[J].北京航空航天大学学报,2006,32(9):1225-1228. JIN Man,ZHANG Li,CHEN Zhitong.End-points error controlling method for torus tool position optimization in five-axis NC machining[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(9):1225-1228.(in Chinese)
|
| [7] |
王瑞秋,陈五一,金曼.多点切触加工中的局部干涉分析[J].北京航空航天大学学报,2006,32(5):580-584. WANG Ruiqiu,CHEN Wuyi,JIN Man.Local interference identification of multi-point machining[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(5):580-584.(in Chinese)
|
| [8] |
陈浪,秦大同,郑小光.基于形状特征的自由曲面建模技术[J].机械工程学报,2002,38(11):105-108. CHEN Lang,QIN Datong,ZHENG Xiaoguang.Free-form surface modeling based on shape characteristic in reverse engineering[J].Journal of Mechanical Engineering,2002,38(11):105-108.(in Chinese)
|
| [9] |
丁毅,顾培夫.实现均匀照明的自由曲面反射器[J] .光学学报,2007,27(3):540-544. DING Yi,GU Peifu.Freeform reflector for uniform illumination[J].Acta Optica Sinica,2007,27(3):540-544.(in Chinese)
|
| [10] |
Erdim H,Lazoglu I,Ozturk B.Freedrate scheduling strategies for free-form surface[J].International Journal of Machine Tools and Manufacture,2006,46(7/8):747-757.
|
| [11] |
王太勇,张志强,王涛,等.复杂参数曲面高精度刀具轨迹规划算法[J] .机械工程学报,2007,43(12):109-113. WANG Taiyong,ZHANG Zhiqiang,WANG Tao,et al.High precision tool path planning algorithm for complex parametric surface[J].Journal of Mechanical Engineering,2007,43(12):109-113.(in Chinese)
|
| [12] |
谢叻,周儒荣,阮雪榆.自由曲面自适应投影法精加工刀轨生成[J] .上海交通大学学报,2000,34(10):1382-1384. XIE Le,ZHOU Rurong,RUAN Xueyu.NC tool path generation based on adaptive projection medthod for free form surface[J].Journal of Shanghai Jiaotong University,2000,34(10):1382-1384.(in Chinese)
|
| [13] |
Krimpenis A,Fousekis A,Vosniakos G.Assessment of sculptured surface milling strategies using design of experiments[J].International Journal of Advanced Manufacture Technology,2000,25(5/6):444-453.
|
| [14] |
Rao A,Sarmar R.On local gouging in five-axis sculptured surface maching using flat-end tools[J].Computer-Aided Design,2000,32(7):409-420.
|
| [15] |
刘雄伟,张定华,王增强,等.数控加工理论与编程技术[M].2版.北京:机械工业出版社,2001:115-120.
|
DownLoad: