| Citation: | ZHANG Dong-hui, BI Shu-sheng, YU Jing-jun, PEI Xu. A control method of novel electrical composite force loading system[J]. Journal of Aerospace Power, 2013, 28(1): 54-59.
|
| [1] |
焦宗夏,华清,王晓东,等.负载模拟器的评价指标体系[J].机械工程学报,2002,38(11):26-30. JIAO Zongxia,HUA Qing,WANG Xiaodong,et al.Estimation for performance of load simulator[J].Chinese Journal of Mechanical Engineering,2002,38(11):26-30.(in Chinese)
|
| [2] |
任志婷,焦宗夏.小转矩电动式负载模拟器的设计[J].北京航空航天大学学报,2003,29(1):91-94. REN Zhiting,JIAO Zongxia.Design of motor-drive load simulator with small torque outputs[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(1):91-94.(in Chinese)
|
| [3] |
符文星,孙力,于云峰,等.大力矩电动负载模拟器设计与建模[J].系统仿真学报,2009,21(12):3596-3598. FU Wenxing,SUN Li,YU Yunfeng,et al.Design and model-building of motor-driven load simulator with large torque outputs[J].Journal of System Simulation,2009,21(12):3596-3598.(in Chinese)
|
| [4] |
LI Jianfu,FU Wenxing.Self-learning control of load changes in motor-driven load simulator using CMAC //Proceedings of 2009 IEEE International Conference on Intelligent Computing and Intelligent Systems.Piscataway,US:IEEE Computer Society,2009:156-159.
|
| [5] |
王鑫,冯冬竹.近空间高动态飞行器舵机加载模拟器地面试验研究[J].系统仿真学报,2009,21(19):6057-6061. WANG Xin,FENG Dongzhu.Load simulator design and ground test of near space hypersonic vehicle[J].Journal of System Simulation,2009,21(19):6057-6061.(in Chinese)
|
| [6] |
吴剑.基于并联六自由度电液伺服机构的单自由度力控制研究 .杭州:浙江大学,2006. WU Jian.Research of single-DOF force control based on 6-DOF parallel electro-hydraulic servo mechanism .Hangzhou:Zhejiang University,2006.(in Chinese)
|
| [7] |
王宣银,吴剑,吴乐彬.基于并联六自由度电液伺服机构的力控制方法[J].上海交通大学学报,2007(1):106-110. WANG Xuanyin,WU Jian,WU Lebin.The force control method based on 6-DOF parallel electro-hydraulic servo mechanism[J].Journal of Shanghai Jiaotong University,2007(1):106-110.(in Chinese)
|
| [8] |
张元,盛守照,王道波.海面阵风力加载器控制系统设计[J].伺服控制,2011(1):43-46.
|
| [9] |
陈五一,宋美巍.一种五轴联动机床加载试验装置:中国,201010189168.3 .2010-05-24.
|
| [10] |
Bonev I A.Direct kinematics of zero-torsion parallel mechanisms //Proceedings of 2008 IEEE International Conference on Robotics and Automation.Piscataway,NJ,US:Institute of Electrical and Electronics Engineers Inc.,2008:3851-3856.
|
| [11] |
王明彦,郭犇,王金梁.惯量和刚度对电动负载模拟器频宽影响的分析[J].电机与控制学报,2004,8(1):71-73. WANG Mingyan,Guo Ben,Wang Jinliang.Simulation of the influence of inertia and rigidity on the bandwidth of electrical load simulator[J].Electric Machines and Control,2004,8(1):71-73.(in Chinese)
|
| [12] |
方强.被动式力矩伺服控制系统设计方法及应用研究 .哈尔滨:哈尔滨工业大学,2006. FANG Qiang.Research on design method for passive torque servo control system and its application .Harbin:Harbin Institute of Technology,2006.(in Chinese)
|
| [13] |
李成功,靳红涛,焦宗夏.电动负载模拟器多余力矩产生机理及抑制[J].北京航空航天大学学报,2006,32(2):204-208. LI Chenggong,JIN Hongtao,JIAO Zongxia.Mechanism and suppression of extraneous torque of motor driver load simulator[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(2):204-208.(in Chinese)
|
| [14] |
孟庆明.自动控制原理[M].北京:高等教育出版社,2003.
|
| [15] |
吴军.四自由度冗余混联机床的分析、辨识及控制 .北京:清华大学,2005. WU Jun.Analysis,identification and control of a 4-DOF hybrid machine tool with actuation redundazcy .Beijing:Tsinghua University,2005.(in Chinese)
|
| [16] |
司丹丹,赵晓蓓,符文星,等.应用多路前馈和负反馈提高电动加载系统性能研究[J].测控技术,2008,27(5):90-93. SI Dandan,ZHAO Xiaobei,FU Wenxing,et al.Research on improving electric load system performance by complex feedforward and feedback control[J].Measurement & Control Technology,2008,27(5):90-93.(in Chinese)
|
DownLoad: