| Citation: | TIAN Xiao-pei, SHAN Peng. Boundary conditions and Fourier series truncation errors with 3-D inverse method for radial and mixed flow turbomachines[J]. Journal of Aerospace Power, 2013, 28(2): 390-400.
|
| [1] |
Wu C.A general theory of three-dimensional flow in subsonic and supersonic turbomachines of axial-,radial-,and mixed-flow types[R].NACA Technical Note 2604,1952.
|
| [2] |
Wu C, Wang Z,Chen H.Three-dimensional rotational flow in transonic turbomachines:Part Ⅰ solution obtained using a number of S1 stream filaments of revolution and a central S2 stream filament[J].ASME Journal of Turbomachinery,1992,114(1):38-49.
|
| [3] |
Zhao X,Sun C,Wu C.A simple method for solving three-dimensional inverse problems of turbomachine flow and the annular constraint condition[J].ASME Journal of Engineering for Gas Turbines and Power,1985,107(4):293-300.
|
| [4] |
Demeulenaere A,Van B R.Three-dimensional inverse method for turbomachinery blading design[J].ASME Journal of Turbomachinery,1998,120(4):247-255.
|
| [5] |
Dang T,Damle S,Qiu X.Euler-based inverse method for turbomachine blades:Part Ⅱ three dimensions flows[J].AIAA Journal,2000,38(11):2007-2013.
|
| [6] |
Ji M,Dang T,Cave M J.Fully three-dimensional viscous semi-inverse method for subsonic mixed-flow and radial impeller design[R].ASME Paper GT2009-59679,2009.
|
| [7] |
Hawthorne W R,Tan C S,Wang C,et al.Theory of blade design for large defections:Part Ⅰ two-dimensional cascades[J].ASME Journal of Engineering for Gas Turbines and Power,1984,106(2):346-353.
|
| [8] |
Tan C S,Hawthorne W R,Wang C,et al.Theory of blade design for large defections:Part Ⅱ annular cascades[J].ASME Journal of Engineering for Gas Turbines and Power,1984,106(2):354-365.
|
| [9] |
Tian X,Shan P.A compressible three-dimensional inverse design method based on the streamline curvature approach and Clebsch formulation for radial and mixed flow turbomachines[R].ASME Paper Power,2012-54805,2012.
|
| [10] |
Borges J E.A three-dimensional inverse method for turbomachinery:Part Ⅰ theory[J].ASME Journal of Turbomachinery,1990,112(3):346-354.
|
| [11] |
罗兴琦,陈乃祥,林汝长.混流式转轮内有旋流动的全三元反问题计算[J].力学学报,1995,27(增刊):30-36. LUO Xingqi,CHEN Naixiang,LIN Ruchang.Inverse calculation of a full three dimensional rotational flow for mixed flow runner[J].Acta Mechanica Sinica,1995,27(Sup.):30-36.(in Chinese)
|
| [12] |
郑小波.混流式转轮的全三维设计[R].西安:西安理工大学,2000.
|
| [13] |
Zangeneh M, Hawthorne W R.A fully compressible three-dimensional inverse design method applicable to radial and mixed flow turbomachines[R].ASME Paper 90-GT-198,1990.
|
| [14] |
罗兴琦,陈乃祥,彭国义,等.有旋流动的全三维反问题计算在混流式转轮设计中的应用[J].水利学报,1996(10):27-38. LUO Xingqi,CHEN Naixiang,PENG Guoyi,et al.An optimum design method for hydraulic turbine runner[J].Journal of Hydraulic Engineering,1996(10):27-38.(in Chinese)
|
| [15] |
NUMECA International.FineTM user manual version 6.2-b [M].Brussels,Belgium:NUMECA International,2004.
|
DownLoad: