| Citation: | FENG Yin-li, WU Chang-bo, GAO Peng, CHEN Wei. Analysis of power metallurgy superalloy turbine disc's burst speed[J]. Journal of Aerospace Power, 2013, 28(3): 501-506.
|
| [1] |
吕文林, 陈俊粤, 田德义.航空涡喷、涡扇发动机结构设计准则(研究报告):第二册 轮盘[M].北京:中国航空工业总公司发动机系统工程局,1997.
|
| [2] |
陈光.航空发动机结构设计分析[M].北京:北京航空航天大学出版社,2006.
|
| [3] |
Standard M.MIL-STD-1783 engine structure integrity program (ENSIP)[M].Washington,USA:United Sates Air Force,1984.
|
| [4] |
国防科学技术工业委员会.GJB241A-2010航空涡轮喷气和涡轮风扇发动机通用规范[M].北京:国防科学技术工业委员会,2010.
|
| [5] |
吴长波,卿华,冯引利,等.某高压涡轮整体叶盘破裂转速计算方法及试验验证[J].燃气涡轮试验与研究,2006,19(3):33-36. WU Changbo,QING Hua,FENG Yinli,et al.Investigation on the prediction and experiment of high- pressure turbine blisk burst speed[J].Gas Turbine Experiment and Research,2006,19(3):33-36.(in Chinese)
|
| [6] |
洪其麟,王屏.计算轮盘破裂转速的大变形解析法[J].航空动力学报,1990,5(4):321-324. HONG Qiling,WANG Ping.A large analytical deformation method for prediction of disk burst speed[J].Journal of Aerospace Power,1990,5(4):321-324.(in Chinese)
|
| [7] |
王屏,刘思永.用大变形解析法和小变形解析法计算轮盘破裂转速的比较[J].机械强度,1998,20(2):95-98. WANG Ping,LIU Siyong.A comparison of disk burst speeds calculated by analytical large deformation method and analytical mini-deformation method[J].Journal of Mechanocal Strength,1998,20(2):95-98.(in Chinese)
|
| [8] |
郑祺选.轮盘破裂转速试验研究[J],航空动力学报,1990,5(4):318-320. ZHENG Qixuan.An experimental study on disc bursting speed[J].Journal of Aerospace Power,1990,5(4):318-320.(in Chinese)
|
| [9] |
孙国维.几种材料和结构的轮盘转子破裂准则的试验应用[J].热能动力工程,1988,3(3):30-35. SUN Guowei.Experimental application of the fracture criteria of disk rotors of different matericals and structures[J].Journal of Engineering for Thermal Energy and Power,1988,3(3):30-35.(in Chinese)
|
| [10] |
古爱军,张学仁,王屏,等.轴流式轮盘破裂转速的数值计算方法[J].航空动力学报,2001,16(3):287-290. GU Aijun,ZHANG Xueren,WANG Ping,et al.Numerical method for calculating the burst speed of axial-flow-type discs[J].Journal of Aerospace Power,1990,5(4):318-320.(in Chinese)
|
| [11] |
赵俊生,马朝臣,胡辽平.车用涡轮增压器叶轮破裂转速的弹塑性数值分析[J].机械科学与技术,2008,27(1):45-49. ZHAO Junsheng,MA Chaochen,HU Liaoping.Elastoplasticity numerical analysis of the burst speed of vehicular turbocharger impeller[J].Mechanical Science and Technology for Aerospace Engineering,2008,27(1):45-49.(in Chinese)
|
| [12] |
万江艳,周柏卓.轮盘模拟件破裂试验及其有限元描述[J].航空发动机,2008,34(2):19-21. WAN Jiangyan,ZHOU Baizhuo.Fracture test of disk simulated specimen and its description of finite element[J].Aeroengine,2008,34(2):19-21.(in Chinese)
|
| [13] |
万江艳,周柏卓.轮盘弹塑性盘破裂准则的建立及变厚度轮盘破裂转速预测[J].航空发动机,2011,37(5):4-6. WAN Jiangyan,ZHOU Baizhuo.Elastic-plastic disc burst criteria establishment and variable thickness disk burst rotational speed prediction[J].Aeroengine,2011,37(5):4-6.(in Chinese)
|
| [14] |
《航空发动机设计手册》总编委会.航空发动机设计手册:第18册[M].北京:航空工业出版社,2001.
|
| [15] |
马健,黄文周.涡轮盘与挡板的无螺栓连接结构[J].燃气涡轮试验与研究,2008,21(2):24-26. MA Jian,HUANG Wenzhou.Non-bolted joint between turbine disk and side plate[J].Gas Turbine Experiment and Research.2008,21(2):24-26.(in Chinese)
|
DownLoad: