| Citation: | HUANG Xin-chun, ZHANG Ding-hua, YAO Chang-feng, REN Jing-xin. Effects of grinding parameters on surface integrity of GH4169 nickel-based superalloy[J]. Journal of Aerospace Power, 2013, 28(3): 621-628.
|
| [1] |
任敬心,康仁科,王西彬.难加工材料磨削技术[M].北京:电子工业出版,2011.
|
| [2] |
Paulo D J.Surface integrity in machining[M]. New York:Springer London Dordrecht Heidelberg,2010.
|
| [3] |
Kumar S,Choudhury S K.Prediction of wear and surface roughness in electro-discharge diamond grinding [J].Journal of Materials Processing Technology,2007,191(1/2/3): 206-209.
|
| [4] |
Hecker R L,Liang S Y.Predictive modeling of surface roughness in grinding[J].International Journal of Machine Tools & Manufacture,2003,43(8):755-761.
|
| [5] |
Peter J,Snoey R. Residual stress in plunge and cylindrical grinding [J].Int.Conf.on Manufacturing Engineering,1980,80(5):172-177.
|
| [6] |
Guo C,Shi Z,Attia H,et al.Power and wheel wear for grinding nickel alloy with plated CBN wheels [J].CIRP Annals-Manufacturing Technology,2007,56(1):343-346.
|
| [7] |
何玉怀,于慧臣,郭伟彬,等.直接时效GH4169高温合金疲劳裂纹扩展性能试验[J].航空动力学报,2006,21(2):49-53.HE Yuhuai,YU Huichen,GUO Weibin,et al.Experimental study on fatigue crack growth behavior of direct aging GH4169 superalloy[J].Journal of Aerospace Power,2006,21(2):49-53.(in Chinese)
|
| [8] |
Xu X P,Yu Y Q,Xu H J.Effect of grinding temperatures on the surface integrity of a nickel-based superalloy[J]. Journal of Materials Processing Technology,2002,129(1/2/3):359-363.
|
| [9] |
周志雄,毛聪,周德旺,等.平面磨削温度及其对表面质量影响的实验研究[J].中国机械工程,2008,19(8):980-984.ZHOU Zhixiong,MAO Cong,ZHOU Dewang,et al.Experimental investigation of grinding temperature and its effects on surface quality in surface grinding[J].China Mechanical Engineering,2008,19(8):980-984.(in Chinese)
|
| [10] |
康仁科,原京庭,任敬心.陶瓷结合剂CBN 砂轮磨削难加工材料时磨削液的作用[J].西北工业大学学报,2000,18(4):527-530.(in Chinese) KANG Renke,YUAN Jingting,REN Jingxin. Effect of grinding fluid on grinding properties of vitrified bonded CBN wheel[J].Journal of Northwestern Polytechnical University,2000,18(4):527-530.(in Chinese)
|
| [11] |
任敬心,孟庆国,陈景蕙.GH33A高温合金的磨削温度与残余应力[J].航空工艺技术,1995,1(1):3-7.REN Jingxin,MENG Qingguo,CHEN Jinghui.Grinding temperature and residual stress of grinding superalloy GH33A[J].Aeronautical Manufacturing Technology,1995,1(1):3-7.(in Chinese)
|
| [12] |
任敬心,杨茂奎,李雅清,等.镍基高温合金的磨削特征[J].航空学报,1999 ,18(6):755-758.REN Jingxin,YANG Maokui,LI Yaqing,et al.Grinding characteristic of nickel besed superalloy[J].Acta Aeronautica et Astronautica Sinica,1999,18(6):755-758.(in Chinese)
|
| [13] |
杨茂奎,李雅卿,史兴宽,等.陶瓷结合剂CBN 砂轮磨削GH4169高温合金的磨削加工性与磨削表面完整性[J].工具技术,1996,30(11):6-10.YANG Maokui,LI Yaqing,SHI Xingkuan,et al.The grindability and grinding surface integrity of nickel-based superalloy GH4169 using CBN wheel[J].Tool Engineering 1996,30(11):6-10.(in Chinese)
|
| [14] |
黄新春,张定华,杨振朝,等.GH4169磨削表面粗糙度影响参数的敏感性研究[J].航空制造技术,2012,1(8):83-86.HUANG Xinchun,ZHANG Dinghua,YANG Zhenchao,et al.Study of sensitivity of parameter affecting surface roughness in grinding superalloy GH4169[J].Aeronautical Manufacturing Technology,2012,1(8):83-86.(in Chinese)
|
| [15] |
美国可切削性数据中心.机械加工切削数据手册[M].北京:机械工业出版社,1989.
|
DownLoad: