| Citation: | LUO Hua-yun, HOU Min-jie, WANG Yue-gui, YE Wei, LIU Zhi-gang. Experiments on metal bellows expansion joints in six-component balance[J]. Journal of Aerospace Power, 2013, 28(4): 736-742.
|
| [1] |
杨玲,谢守勇,杨明金,等.膨胀节波纹管优化设计[J].农业机械学报,2006,37(9):153-156. YANG Ling,XIE Shouyong,YANG Mingjin,et al.Research on optimization design of expansion joint bellows[J].Transactions of the Chinese Society for Agricultural Machinery,2006,37(9):153-156.(in Chinese)
|
| [2] |
张兵,王心丰.用非线性有限元分析波纹管的稳定性[J].压力容器,2001,18(1):40-44. ZHANG Bing,WANG Xinfeng.Stability of bellows ana-lysis with nonlinear finite element method[J].Pressure Vessel Technology,2001,18(1):40-44.(in Chinese)
|
| [3] |
贺伟,童泽润,李宏斌.单模块超燃发动机推力测量天平研制[J].航空动力学报,2010,25(10):2285-2289. HE Wei,TONG Zerun,LI Hongbin.Investigation of thrust balance for the single module scramjet[J]. Journal of Aerospace Power,2010,25(10):2285-2289.(in Chinese)
|
| [4] |
姚裕,张召明.整体式盒式应变天平有限元设计研究[J].南京航空航天大学学报,2010,42(1):58-61. YAO Yu,ZHANG Zhaoming.Finite element design on integrated box balance[J].Journal of Nanjing University of Aeronautics & Astronautics,2010,42(1):58-61.(in Chinese)
|
| [5] |
杨恩霞,刁彦飞,庞永刚.多分力矢量喷管试验台的开发设计和研究[J].哈尔滨工程大学学报,2001,22(4):84-86. YANG Enxia,DIAO Yanfei,PANG Yonggang.Spraying pipe test-bed with multicomponent vectors[J].Journal of Harbin Engineering University,2001,22(4):84-86.(in Chinese)
|
| [6] |
付尧明,王强,额日其太,等.矢量喷管六分量测力试验台的研制[J].流体力学试验与测量,2002,16(1):87-93. FU Yaoming,WANG Qiang,Eriqitai,et al.Development of the six-component force-measuring balance for thrust-vectoring nozzle testing[J].Experiments and Measurements in Fluid Mechanics,2002,16(1):87-93.(in Chinese)
|
| [7] |
徐秉铨,王国栋,吴久诚,等.发动机装配与试车[M].北京: 航空工业出版社,1996.
|
| [8] |
中国国家标准化管理委员会.GB/T 12777—2008 金属波纹管膨胀节通用技术条件[S].北京:中国标准出版社,2008.
|
| [9] |
周林,贺小华.层间间隙对多层U形膨胀节结构性能影响的探讨[J].压力容器,2011,28(7):24-28. ZHOU Lin,HE Xiaohua.Discussion on influence of layer gap to performance of multi-layer U-shape expansion joint[J].Pressure Vessel,2011,28(7):24-28.(in Chinese)
|
| [10] |
王世军.无固定支座直埋供热管道设计计算[J].区域供热,2008(5):60-65. WANG Shijun.Design and calculation of direct buryied heating pipeline without fixed seat[J].District Heating,2008(5):60-65.(in Chinese)
|
| [11] |
宋盛华.直埋热力管道驻点漂移问题的分析[J].区域供热,2009(2):43-46. SONG Shenghua.Analyse of stagnation point excursion in direct buryied heating pipeline[J].District Heating,2009(2):43-46.(in Chinese)
|
| [12] |
贺德馨.风洞天平[M].北京:国防工业出版社,2001.
|
| [13] |
王国鼎,杨爱平,高荣雄,等.根据墩台抗推刚度分配梁式桥的水平力[J].中南公路工程,2003,28(4):1-3. WANG Guoding,YANG Aiping,GAO Rongxiong,et al.Distribution of horizontal forces in accordance with anti-push rigidity of girder bridge piers and abutments[J].Central South Highway Engineering,2003,28(4):1-3.(in Chinese)
|
| [14] |
孙即红.波纹膨胀节在工程中的应用[J].山西电力技术,2001,96(1):24-25. SUN Jihong.The use of the corrugated expansion pipe in engineering[J].Shanxi Electric Power,2001,96(1):24-25.(in Chinese)
|
| [15] |
李永生,李建国.波形膨胀节实用技术[M].北京:化学工业出版社,2000.
|
| [16] |
罗华云,赖传兴,王月贵,等.喷管模型试验器六分量天平校准技术[J].航空动力学报,2013,28(1):67-73. LUO Huayun,LAI Chuanxing,WANG Yuegui,et al.Six-component balance calibration technology for nozzle model testing facility[J].Journal of Aerospace Power,2013,28(1):67-73.(in Chinese)
|
| [17] |
徐兰柱,张玉红.管道压力试验时对膨胀节的临时约束及其强度校核[J].天津冶金,2010(5):42-43. XU Lanzhu,ZHANG Yuhong.Temporary restraint and strength calibration on expansion joint at pipeline pressure test[J].Tianjin Metallurgy,2010(5):42-43.(in Chinese)
|
DownLoad: