| Citation: | LI Yong-zhou, ZHANG Kun-yuan, WANG Lei, NAN Xiang-jun. Sensitivity analysis and optimization design of basic flowfield with controllable Mach number distribution[J]. Journal of Aerospace Power, 2013, 28(4): 765-774.
|
| [1] |
Mölder S,Szpiro J.Busemman inlet for hypersonic speeds [J].Journal of Spacecraft and Rockets,1966,3(8):1303-1304.
|
| [2] |
Vijay R,Lewis M,Starkey R.Performance of various truncation strategies employed on hypersonic Busemann inlets [R].AIAA-2009-7249,2009.
|
| [3] |
O’Brien T F.Viscous optimized length constrained axisymmetric geometries for streamline tracing [R].AIAA-2008-2511,2008.
|
| [4] |
Drayna T W,Nompelis I,Candler G V.Hypersonic inward turning inlets:design and optimization [R].AIAA-2006-297,2006.
|
| [5] |
SUN Bo,ZHANG Kunyuan,WANG Chengpeng,et al.Investigation on a streamtraced hypersonic Busemann inlet[J].Journal Aerospace Engineering,2010,224(1):57-63.
|
| [6] |
Gollan R J,Ferlemann P G.Investigation of REST-class hypersonic inlet designs [R].AIAA-2011-2254,2011.
|
| [7] |
YOU Yancheng.An overview of the advantages and concerns of hypersonic inward turning inlets [R].AIAA-2011-2269,2011.
|
| [8] |
Billig F S,Baurle R A,Tam C J,et al.Design and analysis of streamline traced hypersonic inlets .AIAA-1999-4974,1999.
|
| [9] |
Van Wie D,Mölder S.Applications of Busemann inlets design for flight at hypersonic speeds [R].AIAA-1992-1210,1992.
|
| [10] |
Smart M K.Design of Three-dimensional hypersonic inlets with rectangular-to-elliptical shape transition[J].Journal of Propulsion and Power,1999,15(3):408-416.
|
| [11] |
Matthews A J,Jones T V.Design and test of a modular waverider hypersonic intake [R].AIAA-2005-3379,2005.
|
| [12] |
尤延铖,梁德旺.内乘波式进气道内收缩基本流场研究[J].空气动力学学报,2008,26(2):203-207. YOU Yancheng,LIANG Dewang.Investigation of internal compression flowfield for internal waverider-derived inlet[J].Acta Aerodynamica Sinica,2008,26(2):203-207.(in Chinese)
|
| [13] |
南向军,张堃元,金志光,等.压升规律可控的高超声速内收 缩进气道设计[J].航空动力学报,2011,26(3):518-523. NAN Xiangjun,ZHANG Kunyuan,JIN Zhiguang,et al.Investigation on hypersonic inward turning inlets with controlled pressure gradient[J].Journal of Aerospace Power,2011,26(3):518-523.(in Chinese)
|
| [14] |
李永洲,张堃元,南向军.基于马赫数分布规律可控概念的高超声速内收缩进气道设计[J].航空动力学报,2011,27(11):2484-2491. LI Yongzhou,NAN Xiangjun,ZHANG Kunyuan.Design concept of controllable Mach number distribution hypersonic inward turning inlets[J].Journal of Aerospace Power,2011,27(11):2484-2491.(in Chinese)
|
| [15] |
吴先宇,刘睿,罗世彬,等.基于替代模型的 高超声速前体/进气道一体化设计[J].航空动力学报,2008,23(5):796- 802. WU Xianyu,LIU Rui,LUO Shibin,et al.An integrated optimization of hypersonic forebody/inlet based on surrogate models[J].Journal of Aerospace Power,2008,23(5):796-802.(in Chinese)
|
| [16] |
向有志,张堃元,王磊,等.壁面压 升可控的高超轴对称进气道优化设计[J].航空动力学报,2011,26(10):2193-2199. XIANG Youzhi,ZHANG Kunyuan,WANG Lei,et al.Optimization design of hypersonic axisymmetric inlet with controllable law of wall pressure rise[J].Journal of Aerospace Power,2011,26(10):2193-2199.(in Chinese)
|
| [17] |
王振国,陈小前,罗文彩,等.飞行器多学科设计优化理论与应用研究[M].北京:国防工业出版社,2006.
|
| [18] |
南向军,张堃元,金志光.基于反正切曲线压升规律设计高超内收缩进气道[J].航空 动力学报,2011,26 (11):2571-2577. NAN Xiangjun,ZHANG Kunyuan,JIN Zhiguang.Design of hypersonic inward turning inlets with basic flowfield using law of arc tangent pressure rise[J].Journal of Aerospace Power,2011,26 (11):2571-2577.(in Chinese)
|
| [19] |
NAN Xiangjun,ZHANG Kunyuan.Numerical and experimental investigation on hypersonic inward turning inlets with basic flow field using arc tangent curve law of pressure rise [R].AIAA-2011-2270,2011.
|
| [20] |
南向军,张堃元,金志光,等.矩形转圆形高超声速内收 缩进气道数值及实验研究[J].航空学报,2011,32(6):988- 996. NAN Xiangjun,ZHANG Kunyuan,JIN Zhiguang,et al.Numerical and experimental investigation of hypersonic inward turning inlets with rectangular to circular shape transition[J].Acta Aeronautica et Astronautica Sinica,2011,32(6):988-996.(in Chinese)
|
DownLoad: