| Citation: | ZHANG Da-yi, HONG Jie, MA Yan-hong, LIANG Zhi-chao. Novel structural design of mixed-flow compressor with high structural efficiency[J]. Journal of Aerospace Power, 2013, 28(4): 866-871.
|
| [1] |
兰海.斜流式风机叶轮准三维设计与分析 [D].西安:西北工业大学,2004. LAN Hai.Quasi-three dimensional design of diagonal flow fan impeller and numerical analysis [D].Xi'an:Northwestern Polytechnical University,2004.(in Chinese)
|
| [2] |
杜建一,汤华,赵晓路,等.叶顶间隙对离心压气机性能影响的研究[J].工程热物理学报,2006,27(4):583-585. DU Jianyi,TANG Hua,ZHAO Xiaolu,et al.Study on centrifugal impeller with tip clearance[J].Journal of Engineering Thermophysics,2006,27(4):583-585.(in Chinese)
|
| [3] |
袁鹏.涡轴发动机气动性能改进研究及离心叶轮改型设计 [D].南京:南京航空航天大学,2007. YUAN Peng.Research on the performance of a turbo-shaft engine and its centrifugal compressor impeller design [D].Nanjing:Nanjing University of Aeronautics and Astronautics,2007.(in Chinese)
|
| [4] |
Norris F D,William A H.Comparison of the structural efficiency of panels having straight-web and curved-web Y-section stiffeners [R].NACA Technical Note 1787,1949.
|
| [5] |
Norris F D,Rosen B W.Structural efficiency of orthotropic cylindrical shells subjected to axial compression [R].AIAA 65-73,1965.
|
| [6] |
Jerry G W,Martin M M.Analytical and experimental study of structurally efficient composite hat-stiffened panels loaded in axial compression [R].AIAA Paper 75-754,1975.
|
| [7] |
Jerry G W,Stein M.Buckling behavior and structural efficiency of open-section stiffened composite compression panels [R].AIAA 76-35202,1976.
|
| [8] |
Stein M,Jerry G W.Buckling and structural efficiency of sandwich-blade stiffened composite compression panels [R].NASA Report,TP-12691,1978.
|
| [9] |
Storace A F.Turbine engine structural efficiency determination [R].Monterey,AIAA Technical Report 89-2571, 1989.
|
| [10] |
张大义,马艳红,梁智超,等.整机结构设计的评估方法:结构效率[J].航空动力学报,2010,25(10):2070-2176. ZHANG Dayi,MA Yanhong,LIANG Zhichao,et al. Evaluation method on whole engine structural design:structural efficiency[J].Journal of Aerospace Power,2010,25(10): 2070-2176.(in Chinese)
|
| [11] |
张大义,洪杰,梁智超.航空发动机转子系 统的结构效率评估方法研究 [R].贵阳:第9届全国转子动力学学术讨论会, 2010.
|
| [12] |
殷艺云,郭海丁.基于粒子群神经网络的轮盘优化[J].航空动力学报,2007,22(9):1579-1582. YIN Yiyun,GUO Haiding.Optimization of turbine disk based on particle swarm optimization and neural network[J].Journal of Aerospace Power,2007,22(9):1579-1582.(in Chinese)
|
| [13] |
刘朝勋,于立彪,翟峰,等.负重轮轮盘结构优化减重分析[J].中国制造业信息化,2003,32(2):94-96. LIU Chaoxun,YU Libiao,ZHAI Feng,et al.The simulation and structure optimization of wheel disc[J].Manufacture Information Engineering of China,2003,32(2):94-96.(in Chinese)
|
| [14] |
ZHANG Dayi,HONG Jie,MA Yanhong,et al.A probability method for prediction on high cycle fatigue of blades caused by aerodynamic loads[J].Advances in Engineering Software,2011,42(12):1059-1073.
|
| [15] |
张大义,马艳红,洪杰,等.双向顺序耦合法求解动力响应的试验验证[J].航空动力学报,2011,26(6):1266-1273. ZHANG Dayi,MA Yanhong,HONG Jie,et al.Experimental verification on bidirectional sequential method to solve dynamical response caused by aerodynamic loads[J].Journal of Aerospace Power,2011,26(6):1266-1273.(in Chinese)
|
DownLoad: