| Citation: | ZHOU Ping, BAI Guang-chen. Robust design of turbine-blade low cycle fatigue life based on neural networks and fruit fly optimization algorithm[J]. Journal of Aerospace Power, 2013, 28(5): 1013-1018. |
| [1] |
陶春虎,钟培道,王仁智,等.航空发动机转动部件的失效与预防[M].北京:国防工业出版社,2001:31-67.
|
| [2] |
高阳,白广忱,于霖冲.基于RBF神经网络的涡轮盘疲劳可靠性分析[J].机械设计,2009,26(5):9-10. GAO Yang,BAI Guangchen,YU Linchong.Fatigue reliability analysis of turbine-disk based on RBF neural network[J].Journal of Machian Design,2009,26(5):9-10.(in Chinese)
|
| [3] |
段巍,赵峰.结构可靠性分析的响应面方法比较研究[J].中国工程机械学报,2009,7(4):393-396. DUAN Wei,ZHAO Fen.Comparative study on response surface methods for structural reliability analysis[J].Chinese Journal of Construction Machinery,2009,7(4):393-396.(in Chinese)
|
| [4] |
Taguchi G.Taguchi on robust technology development:bringing quality engineering upstream[M].New York:ASME Press,1993.
|
| [5] |
Ghanmi S,Bouazizi M L,Bouhaddi N.Robustness of mechanical systems against uncertainties[J].Finite Elements in Analysis and Design,2007,43(9):715-731.
|
| [6] |
朱学军,王安麟,黄洪钟.基于健壮性的机械设计方法[J].机械科学与技术,2000,19(2):230-233. ZHU Xuejun,WANG Anlin,HUANG Hongzhong.Mechanical design for robustness[J].Mechanical Science and Technology,2000,19(2):230-233.(in Chinese)
|
| [7] |
Ghanmi S,Bouazizi M L,Bouhaddi N.Robustness of mechanical systems against uncertainties[J].Finite Elements in Analysis and Design,2007,43(9):715-731.
|
| [8] |
LI Feng,MENG Guangwei,SHA Lirong,et al.Robust optimization design for fatigue life[J].Finite Elements in Analysis and Design,2011,47(10):1186-1190.
|
| [9] |
刘春涛,林志航.基于响应面和支持向量机的产品健壮设计方法[J].计算机辅助设计与图形学学报,2006,18(8):1175-1178. LIU Chuntao,LIN Zhihan.Robust design of product based on response surface and support vector machine[J].Journal of Computer-Aided Design and Computer Graphics,2006,18(8):1175-1178.(in Chinese)
|
| [10] |
闻新,周露,李翔,等.MATLAB神经网络仿真与应用[M].北京:科学出版社,2003.
|
| [11] |
Pan W T.A new fruit fly optimization algorithm:taking the financial distress model as an example[J].Knowledge Based Systems,2012,26(2):69-74.
|
| [12] |
Hohlrieder M,Irretier H.Numerical study of the fatigue life of a gas turbine blade in transient operations[R].ASME Paper 94-GT-108,1994.
|
| [13] |
艾书民,王克明,缪辉,等.稳态温度场作用下涡轮叶片振动特性的研究[J].沈阳航空航天大学学报,2011,28(4):18-21. AI Shumin,WANG Keming,MIAO Hui,et al.Research on turbine blade vibration characteristic under steady state temperature field[J].Journal of Shenyang Aerospace University,2011,28(4):18-21.(in Chinese)
|
| [14] |
王相平,徐鹤山.有限元计算中的叶片边界条件的选取[J].航空发动机,1998(4):43-46. WANG Xiangping,XU Heshan.The selection of the blade boundary conditions in finite element calculation[J].Aeroengine,1998(4):43-46.(in Chinese)
|
| [15] |
刘春涛,林志航,周春景.具有随机型和区间型干扰因素的产品健壮设计研究[J].中国机械工程,2007,18(5):505-509. LIU Chuntao,LIN Zhihang,ZHOU Chunjin.Study on product robust design with a mixture of random and interval noise factor[J].China Mechanical Engineering,2007,18(5):505-509.(in Chinese)
|