| Citation: | LING Gui-long, CAI Guo-biao, ZHANG Jian-hua. Oil-free vacuum system design based on vacuum plume experiment[J]. Journal of Aerospace Power, 2013, 28(5): 1173-1179.
|
| [1] |
凌桂龙,王文龙,蔡国飙,等.用于发动机羽流试验研究的液氦热沉设计[J].航空动力学报,2011,26(11):2630-2635. LING Guilong,WANG Wenlong,CAI Guobiao,et al.Liquid helium heat sink design for the engine vacuum plume effects experimental study[J].Journal of Aerospace Power,2011,26(11):2630-2635.(in Chinese)
|
| [2] |
王文龙,周建平,蔡国飙.羽流效应地面模拟试验系统关键技术发展[J].航空动力学报,2012,27(4):900-906. WANG Wenlong,ZHOU Jianping,CAI Guobiao.Development of vacuum plume effects ground simulation experimental system key techonlogy[J].Journal of Aerospace Power,2012,27(4):900-906.(in Chinese)
|
| [3] |
达道安.真空设计手册[M].北京:国防工业出版社,2004.
|
| [4] |
黄本诚,童靖宇.空间环境工程学[M].北京:中国科学技术出版社,2010.
|
| [5] |
黄本诚,陈金明.空间真空环境与真空技术[M].北京:国防工业出版社,2005.
|
| [6] |
黄本诚.空间模拟器设计[M].北京:宇航出版社,1994.
|
| [7] |
黄本诚,马有礼.航天器空间环境试验技术[M].北京:国防工业出版社,2002.
|
| [8] |
成致祥.KM4空间模拟器的清洁真空改造[J].中国空间科学技术,1993(2):45-52. CHENG Zhixiang.Oil-free transforming of KM4 space environmental simulator[J].Chinese Space Science and Technology,1993(2):45-52.(in Chinese)
|
| [9] |
黄本诚,刘国青,成致祥,等.特大型空间环境试验设备的超高真空获得技术[J].真空科学与技术,2001,21(1):1-4. HUANG Bencheng,LIU Guoqing,CHENG Zhixiang,et al.Vacuum technology of extra large and ultra-high vacuum space environment simulator[J].Vacuum Science and Technology,2001,21(1):1-4.(in Chinese)
|
| [10] |
茹晓勤,祁妍,吴树迎.用制冷机低温泵获得清洁无油高真空[J].航天器环境工程,2006,23(2):119-121. RU Xiaoqin,QI Yan,WU Shuying.Production of dry-clean high-vacuum with refrigerator's cryopumps[J].Spacecraft Environment Engineering,2006,23(2):119-121.(in Chinese)
|
| [11] |
郭欣,邵容平,阎荣鑫.环境模拟器低温泵测试系统设计[J].真空,2011,48(2):79-82. GUO Xin,SHAO Rongping,YAN Rongxin.Design of performance testing system of cryopumps for environment simulator[J].Vacuum,2011,48(2):79-82.(in Chinese)
|
| [12] |
张璠.真空容器的漏气率与升压率[J].真空,1993(2):1-5. ZHANG Pan.Leak throughput and rate of pressure rise of vacuum chamber[J].Vacuum,1993(2):1-5.(in Chinese)
|
| [13] |
李殿东.高真空阀门漏率和升压率的区别[J].真空,2003(4):37-39. LI Diandong.Difference between leak rate and rate of pressure rise of high vacuum valve[J].Vacuum,2003(4):37-39.(in Chinese)
|
| [14] |
陈涛,李玉忠,许忠旭,等.真空热试验中材料放气的放气量及其导热问题[J].航天器环境工程,2006,23(2):103-106. CHEN Tao,LI Yuzhong,XU Zhongxu,et al.Material outgassing amount and thermal conduction in vacuum thermal test[J].Spacecraft Environment Engineering,2006,23(2):103-106.(in Chinese)
|
| [15] |
田玉林,黄文学,王玥,等.RFQ1L系统压升率的理论与实验研究[J].原子核物理评论,2008,25(1):44-47. TIAN Yulin,HUANG Wenxue,WANG Yue,et al.Theoretical and experimental study on the pressure rise rate of RFQ1L system[J].Nuclear Physics Review,2008,25(1):44-47.(in Chinese)
|
| [16] |
中国国家标准化管理委员会.GB/T 22561-2008真空热处理[S].北京:中国标准出版社,2008. Standardization Administration of the People's Republic of China.GB/T 22561-2008 vacuum heat treatment[S].Beijing:Standards Press of China,2008.
|
DownLoad: