Volume 28 Issue 6
Jun.  2013
Turn off MathJax
Article Contents
LI Long, GAO Xi-guang, SHI Jian, SONG Ying-dong. Calculation of needled C/SiC composite elastic parameters in consideration of the porosity[J]. Journal of Aerospace Power, 2013, 28(6): 1257-1263.
Citation: LI Long, GAO Xi-guang, SHI Jian, SONG Ying-dong. Calculation of needled C/SiC composite elastic parameters in consideration of the porosity[J]. Journal of Aerospace Power, 2013, 28(6): 1257-1263.

Calculation of needled C/SiC composite elastic parameters in consideration of the porosity

  • Received Date: 2012-06-21
  • Publish Date: 2013-06-28
  • Based upon the microphotographs of the needled ceramic matrix composites(CMCs),appropriate representative volume elements(RVE) were selected to establish a single-cell model for predicting the elastic properties of needled ceramic matrix composites.The effect of porosities on the elastic properties of matrix and fiber bundles was considered,and the elastic constants of fiber bundles were calculated by mixed rate,then elastic constants of fiber bundles and matrix were taken into the single-cell model.The elastic properties of needled ceramic matrix composites were calculated by the finite element method(FEM) at last.At the same time,the tests for tensile strength and determination of porosities were carried.Through the experiment,the materials' open porosity of 7.33% and closed-cell porosity of 10.67% were acquired.Numerical results of the elastic properties obtained by the proposed method agree well with the experimental results,and the error is 3.1%.

     

  • loading
  • [1]
    刘建军,李铁虎,郝志彪,等.针刺炭布/网胎复合织物的组分形态及性能研究[J].固体火箭技术,2005,28(4):299-303. LIU Jianjun,LI Tiehu,HAO Zhibiao,et al.Investigation on morphology and property of needled carbon cloth and web composite fabric[J].Journal of Solid Rocket Technology,2005,28(4):299-303.(in Chinese)
    [2]
    杨爱玉,王者辉.NOVOLTEX碳/碳复合材料:固体火箭发动机喷管材料的最佳选择[J].宇航材料工艺,1996(6):49-55. YANG Aiyu,WANG Zhehui.NOVOLTEX C/C composite-solid rocket motor nozzle was the best choice of materials[J].Aerospace Materials and Technology,1996(6):49-55.(in Chinese)
    [3]
    Ellis R A.Testing of novoltex 3-D carbon-carbon integral throat and exit cones (ITECs)[R].AIAA-88-3361,1988.
    [4]
    Moutaudon M.Novoltex textures for thermostrctural material[R].AIAA 91-1848,1991.
    [5]
    NIE Jingjiang,XU Yongdong,ZHANG Laifei,et al.Microstructure and tensile behavior of muti-ply needled C/SiC composite fabricated by chemical vapor infiltration[J].Journal of Mater Process Technology,2009,209(1):572-576.
    [6]
    Christin F A.A global approach n D architectures and self-scaling matrices:from research to production[J].International Journal of Applied Ceram Technology,2005,2(2):97-104.
    [7]
    刘建军,李铁虎,郝志彪,等.针刺技术在C/C复合材料增强织物中的应用[J].宇航材料工艺,2008(3):8-10. LIU Jianjun,LI Tiehu,HAO Zhibiao,et al.Application of needling technology on reinforced fabrics of C/C composite materials[J].Aerospace Materials and Technology,2008(3):8-10.(in Chinese)
    [8]
    Krenkel W,Berndt F.C/C-SiC composites for space applications and advanced friction systems[J].Material Science and Engineering(A),2005,412(1/2):177-181.
    [9]
    CAI Yanzhi,FANG Shangwu,LIU Heyi.Mechanical properties of a 3D needled C/SiC composite with graphite filler[J].Materials Science and Engineering,2010,527(1):539-543.
    [10]
    郭友军,聂景江,徐永东,等.三维针刺C/SiC复合材料的结构特征和力学性能[J].硅酸盐学报,2008,36(2):144-149. GUO Youjun,NIE Jingjiang,XU Yongdong,et al.Mocrostructure and mechanical properties of three-dimensional needled C/SiC composite[J].Nitrate Journal,2008,36(2):144-149.(in Chinese)
    [11]
    常岩军,张克实,矫桂琼,等.纤维束内部孔洞对2.5D-C/SiC复合材料弹性性能的影响研究[J].工程力学,2011,28(3):230-239. CHANG Yanjun,ZHANG Keshi,JIAO Guiqiong,et al.The effect of voids in bundle on elastic properties of 2.5D-C/SiC composites[J].Engineering Mechanics,2011,28(3):230-239.(in Chinese)
    [12]
    袁义云.含孔隙陶瓷基复合材料基体的力学性能和失效问题研究.南京:南京航空航天大学,2008. YUAN Yiyun.Research on matrix failure and mechanical performance of the ceramic matrix composites with pores.Nanjing:Nanjing University of Aeronautics and Astronautics,2008.(in Chinese)
    [13]
    袁义云,宋迎东,孙志刚.孔隙率对多孔陶瓷材料失效强度的影响[J].航空动力学报,2008,23(9):1623-1627. YUAN Yiyun,SONG Yingdong,SUN Zhigang.Effect of porosity on the failure strength of porous ceramic materials[J].Journal of Aerospace Power,2008,23(9):1623-1627.(in Chinese)
    [14]
    刘玲,路明坤,张博明,等.孔隙率对碳纤维复合材料超声衰减系数和力学性能的影响[J].复合材料学报,2004,21(5):116-121. LIU Ling,LU Mingkun,ZHANG Boming.Effects of porosity on the ultrasonic absorption coefficient and mechanical strength of carbon/epoxy composites[J].Acta Materiae Composite Sinica,2004,21(5):116-121.(in Chinese)
    [15]
    梁军,陈晓峰,杜善义.多向编织复合材料的力学性能研究[J].力学进展,1999,29(2):197-210. LIANG Jun,CHEN Xiaofeng,DU Shanyi.Study of mechanical properties of multi directional braided composites[J].Advances in Mechanics,1999,29(2):197-210.(in Chinese)
    [16]
    孙万昌,李贺军.沉积温度对碳/碳复合材料密度均匀性的影响[J].硅酸盐学报,2005,33(6):780-783. SUN Wanchang,LI Hejun.Influence of deposition temperature on density uniformity of carbon/carbon composites[J].Journal of the Chinese Ceramic Society,2005,33(6):780-783.(in Chinese)
    [17]
    闫联生,邹武,宋麦丽.3D C/SiC复合材料的孔隙率与性能的关系[J].碳素技术,1999(1):11-13. YAN Liansheng,ZOU Wu,SONG Maili.The relation between porosity and the properties of 3D C/SiC composites[J].Carbon Techniques,1999(1):11-13.(in Chinese)
    [18]
    许英杰,张卫红,杨军刚.平纹机织多元多层碳化硅陶瓷基复合材料的等效弹性模量预测[J].航空学报,2008,29(5):1350-1355. XU Yingjie,ZHANG Weihong,YANG Jungang.Prediction of effective elastic modulus of plain weave multi-phase and multilayer silicon carbide ceramic matrix composite[J].Acta Aeronautica et Astronautica Sinica,2008,29(5):1350-1355.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1931) PDF downloads(1082) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return