| Citation: | LI Hang, LI Bo. Internal contraction tunnel design of two-dimensional hypersonic inlet[J]. Journal of Aerospace Power, 2013, 28(6): 1291-1297.
|
| [1] |
Seddon J,Goldsmith E L.Intake aerodynamics[M].London:Blackwell Science,1999.
|
| [2] |
王振国,梁剑寒,丁猛,等.高超声速飞行器动力系统研究进展[J].力学进展,2009,39(6):716-739. WANG Zhenguo,LIANG Jianhan,DING Meng,et al.A review on hypersonic airbreathing propulsion system[J].Advances in Mechanics,2009,39(6):716-739.(in Chinese)
|
| [3] |
黎明,宋文艳,贺伟.高超声速二维混压式前体/进气道设计方法研究[J].航空动力学报,2004,19(4):459-465. LI Ming,SONG Wenyan,HE Wei.Design method of two-dimensional hypersonic forebody/inlet of mixed compression[J].Journal of Aerospace Power,2004,19(4):459-465.(in Chinese)
|
| [4] |
Bachchan N,Hillier R.Hypersonic inlet flow analysis at off-design conditions[R].AIAA 2004-5380,2004.
|
| [5] |
Duquesne N,Alziary T.Numerical investigation of a three-dimensional turbulent shock/shock interaction[R].AIAA-98-0774,1998.
|
| [6] |
Hawboldt R J,Sullivan P A,Gottlieb J J.Experimental study of shock wave and hypersonic boundary layer interactions near a convex corner[R].AIAA-93-2980,1993.
|
| [7] |
Berry S A,Auslender A H.Hypersonic boundary-layer trip development for hyper-X[R].AIAA 2000-4012,2000.
|
| [8] |
Craddock C S.Computational optimization of scramjets and shock tunnel nozzles[D].Queensland:University of Queensland,1999.
|
| [9] |
Van Wie D M,Ault D A.Internal flowfield characteristics of a two-dimensional inlet at Mach 10[J].Journal of Propulsion and Power,1996,12(1):158-164.
|
| [10] |
XU Xu,XU Dajun,CAI Guobiao.Optimization design for scramjet and analysis of its operation performance[J].Acta Astronautica,2005,57(2/3/4/5/6/7/8):390-403.
|
| [11] |
张晓嘉,梁德旺.内压缩通道几何参数对高超声速进气道性能的影响[J].南京航空航天大学学报,2005,37(6):685-689. ZHANG Xiaojia,LIANG Dewang.Performance effects of geometry parameters on hypersonic inlet[J].Journal of Nanjing University of Aeronautics and Astronautics,2005,37(6):686-689.(in Chinese)
|
| [12] |
张晓嘉,梁德旺,黄国平.二元高超声速进气道内压缩通道/隔离段曲面构型[J].推进技术,2008,29(1):49-53. ZHANG Xiaojia,LIANG Dewang,HUANG Guoping.Curved surface structure of internal contraction tunnel/ isolator of two-dimensional hypersonic inlet[J].Journal of Propulsion Technology,2008,29(1):49-53.(in Chinese)
|
| [13] |
张晓嘉,梁德旺,李博,等.典型二元高超声速进气道设计方法研究[J].航空动力学报,2007,22(8):1290-1296. ZHANG Xiaojia,LIANG Dewang,LI Bo,et al.Study of design method of typical two-dimensional hypeisonic inlet[J].Journal of Aerospace Power,2007,22(8):1290-1296.(in Chinese)
|
| [14] |
Andrews E H,Trexler C A.Tests of a fixed-geometry inter-combustor configuration for hydrocarbon-fueled dual-mode scramjet[R].AIAA 94-2817,1994.
|
| [15] |
王翼.高超声速进气道启动问题研究[D].长沙:国防科学技术大学,2008. WANG Yi.Investigation on the starting characteristics of hypersonic inlet[D].Changsha:National University of Defense Technology,2008.(in Chinese)
|
DownLoad: