Volume 28 Issue 6
Jun.  2013
Turn off MathJax
Article Contents
WANG Song-tao, HU Ying-jiao, WANG Zhong-qi. Aerodynamic design method of high loaded supersonic axial-compressor with low reaction[J]. Journal of Aerospace Power, 2013, 28(6): 1322-1332.
Citation: WANG Song-tao, HU Ying-jiao, WANG Zhong-qi. Aerodynamic design method of high loaded supersonic axial-compressor with low reaction[J]. Journal of Aerospace Power, 2013, 28(6): 1322-1332.

Aerodynamic design method of high loaded supersonic axial-compressor with low reaction

  • Received Date: 2012-05-31
  • Publish Date: 2013-06-28
  • For supersonic axial flow compressors, a brief summary was given for its historical development. The internal flow characteristics and problems of the two kinds of traditional supersonic compressors were analyzed. Some prospects were proposed for its future technology trends and research orientation. According to the flow characteristics in supersonic compressors, a new aerodynamic design method of high loaded supersonic axial-compressor with low reaction was put forward. Using this method, active flow control means are not necessary in the efficient rotor, and the exit absolute Mach number of the rotor is decreased. For the downstream stator, boundary layer suction is used to solve its internal flow problems to fulfill an efficient and high loaded stage design.A preliminary design verification of the principle has been conducted.The 3-D viscous numerical simulation results show that at the tip tangential speed of 360m/s,the stage pressure ratio of 2.3 and the isentropic efficiency of 86.5% are achieved in the use of this concept.

     

  • loading
  • [1]
    Brieden K.Die anisentrope Vberschalldurchströmung des streckengitters[J].Zeitschrift für Angewandte Mathematik und Physik,1958,9(5):132-161.
    [2]
    Kantrowitz A.The supersonic axial-flow compressor.NACA Report 974,1950.
    [3]
    Klapproth J F,Ullman G N,Tysl E R.Performance of an impulse-type supersonic compressor with stators.NACA RM52B22,1952.
    [4]
    Lieblein S,Johnesn I A.Resume of transonic compressor research at NACA Lewis-Laboratory[J].Journal of Engineering for Power,1961,83(3):219-232.
    [5]
    Steele R,Baldwin P,Kesseli J,et al.Insertion of shock wave compression technology into micro turbines for increased efficiency and reduced costs[R].ASME Paper GT2005-68203,2005.
    [6]
    Klapproth J F.A review of supersonic compressor development[J].Journal of Engineering for Power,1961,83(3):258-268.
    [7]
    Breugelmans F.On the use of a pseudo-shock system in supersonic compressors[C]//Proceeedings of the Seminar Advanced Problem in Turbomachinery.Nordrhein,Westfalen,German:Rheinisch-Westfaelische Technische Hochschule Aachen,1965:1-59.
    [8]
    Gallus H E,Bohn D,Broichhausen K D.Measurements of quasi-steady and unsteady flow effects in a supersonic compressor stage[R].ASME Paper 77-GT-13,1977.
    [9]
    Wennerstrom A J,Buzzell W A,DeRose R D.Test of a supersonic axial compressor stage incorporating splitter vanes in the rotor[R].Montgomery County,US:Aerospace Research Labs Wright-Patterson Air Force Base,1975.
    [10]
    Broichhausen K D,Ziegler K U.Supersonic and transonic compressors:past,status and technology trends[R].ASME Paper GT2005-69067,2005.
    [11]
    Becker B.Untersuchungen an stark umlenkenden Vberschall-Verzögerungsgittern und deren Einsatzmöglichkeiten in der Axialverdichterstufe[D].Nordrhein,Westfalen,German:Rheinisch-Westfaelische Technische Hochschule Aachen,1970.
    [12]
    Lichtfuss H J,Starken H.Supersonic cascade flow[J].Progress in Aerospace Sciences,1974,15:37-149.
    [13]
    Lichtfuss H J,Starken H.Supersonic cascade interaction.ASME Paper 74-GT-76,1974.
    [14]
    Mönig R,Broichhausen K D,Gallus H E.Application of highly loaded single-stage mixed flow compressors in small jet-engines[R].Munich,Germany:Mmotoren-und Turbinen-union Gmbh Munich,1987.
    [15]
    Elmendorf W,Kurz H,Gallus H E.Design and performance of a mixed flow supersonic compressor stage[C]//Proceedings of 12th International Symposium on Air Breathing Engines.Melbourne,Australia:AIAA,1995:113-124.
    [16]
    Kurz H.Untersuchung und optimierung des tandemleitrades einer diagonalen überschallverdichterstufe[D].Nordrhein,Westfalen,German:Rheinisch-Westfaelische Technische Hochschule Aachen,1997.
    [17]
    Fuchs R.Design and investigation of static pressure compressor cascades behind impulse rotors[D].Köln,Germany:Deutsche Forschungs-und Versuchsanstalt fr Luft-und Raumfahrt,1980.
    [18]
    Lawlor S P,Hinkey J B,Mackin S G,et al.Supersonic compression stage design and test results[R].ASME Paper IMECE 2004-59914,2004.
    [19]
    肖翔.对转冲压压气机冲压叶轮内部流动分析[D].北京:中国科学院工程热物理研究所,2007. XIAO Xiang.The aerodynamic design and analysis of counter-rotating compressor's shock-in impeller[D].Beijing:Institute of Engineering Thermophysics,Chinese Academy of Sciences,2007.(in Chinese)
    [20]
    Broichhausen K D,Gallus H E.Off design performance of supersonic compressors with fixed and variable geometry[R].ASME Paper 87-GT-116,1987.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1871) PDF downloads(949) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return