| Citation: | GAO Li-min, XIE Jian, ZHU Qi-peng, MIAO Fang. Parameters design and 3-D modeling of small flow rate high-speed centrifugal impeller[J]. Journal of Aerospace Power, 2013, 28(6): 1342-1349.
|
| [1] |
Japikse D.Centrifugal compressor design and performance[M].Vermont,USA:Concepts ETI,1996.
|
| [2] |
Aungier R H.Centrifugal compressors:a strategy for aerodynamic design and analysis[M].New York,USA:ASME Press,2000.
|
| [3] |
杨策,施新.径流式叶轮机械理论及设计[M].北京:国防工业出版社,2008.
|
| [4] |
Casey M V.A computational geometry for the blades and internal flow channels of centrifugal compressors[J].ASME Journal of Engineering for Power,1983,105(2):288-295.
|
| [5] |
冀国锋,桂幸民.轴流/离心压气机叶片通用任意中弧线造型设计方法[J].航空动力学报,2009,24(1):150-156. JI Guofeng,GUI Xinming.A blading design method for axial/centrifugal compressor airfoils using arbitrary camber lines[J].Journal of Aerospace Power,2009,4(1):150-156.(in Chinese)
|
| [6] |
Krain H,Hoffman W.Verification of an impeller design by laser measurements and 3D-viscous flow calculation.ASME Paper 89-GT-159,1989.
|
| [7] |
杨策,马朝臣,老大中.几何参数变化对离心压气机性能影响的仿真研究[J].动力工程,2002,22(4):1897-1901. YANG Ce,MA Chaocheng,LAO Dazhong.Centrifugal compressor performance investigation with changing some geometry parameters using simulating method[J].Power Engineering,2002,22(4):1897-1901.(in Chinese)
|
| [8] |
陈宗华,张亚丁.半开式叶轮离心式压缩机的设计与分析[J].化工设备与防腐蚀,2000(3):3-8,24.
|
| [9] |
Galvas M R.Analytical correlation of centrifugal compressor design geometry for maximum efficiency with specific speed.NASA TN-D-6729,1972.
|
| [10] |
《航空发动机设计手册》总编委会.航空发动机设计手册:第8册 压气机分册[M].北京:航空工业出版社,2000.
|
| [11] |
Krain H.Experimental and theoretical analysis of centrifugal compressor impeller flow[C]//Proceedings of the Institution of Mechanical Engineers,International Conference,Turbomachinery-Efficiency Prediction and Improvement.London:Mechanical Engineering Publication Limited,1987:199-210.
|
| [12] |
Kang S,Hirsh C.Influence of tip leakage flow in centrifugal compressor[C]//Proceeding of the 3rd International Symposium on Experimental and Computational Aerodynamics of Internal Flows.Beijing:Word Publish Corporation,1996:186-199.
|
| [13] |
Hah C,Krain H.Second flows and vortex motion in a high-efficiency backswept impeller at design and off-design conditions[J].ASME Journal of Turbomachinery,1990,112(1):7-13.
|
| [14] |
杨策,索沂生,朱伟,等.反弯角达30°离心压气机叶轮内部流场的数值研究级改型设计[J].动力工程,2000,20(1):580-584. YANG Ce,SUO Yisheng,ZHU Wei,et al.Numerical investigation of the internal flow field and redesign of a 30° backswept impeller[J].Power Engineering,2000,20(1):580-584.(in Chinese)
|
| [15] |
周正贵,汪文光.基于数值优化方法的离心压气机工作轮气动设计[J].航空学报,2006,27(1):10-15. ZHOU Zhenggui,WANG Wenguang.Aerodynamic design of impeller using numerical optimization method[J].Acta Aeronautica et Astronautica Sinica,2006,27(1):10-15.(in Chinese)
|
| [16] |
席光.关于Krain实验叶轮几何型线及其流道二次流漩涡结构的讨论[J].工程热物理学报,2000,21(4):440-442. XI Guang.Discussion on the geometry and the secondary flow vortex structure of Krain's experimental compressor impeller[J].Journal of Engineering Thermophysics,2000,21(4):440-442.(in Chinese)
|
DownLoad: