| Citation: | TIAN Liang, CHEN Chao-qun, XU Xu, SONG Gang-lin, ZHANG Yan. Design and numerical simulation of two-dimensional oxygen-hydrogen heater with multiply jet[J]. Journal of Aerospace Power, 2013, 28(7): 1475-1481. |
| [1] |
Curran E T.Scramjet engines:the first forty years[J].Journal of Propulsion and Power,2001,17(6):1138-1148.
|
| [2] |
王树声.论超燃冲压发动机试验研究及其试验设备[J].推进技术,1988,9(1):12-17. WANG Shusheng.On experimental studies of scramjet and its test facilities[J].Journal of Propulsion Technology,1988,9(1):12-17.(in Chinese)
|
| [3] |
张新宇,陈立红,顾洪斌,等.超燃冲压模型发动机实验设备与实验技术[J].力学进展,2003,33(4):491-498. ZHANG Xinyu,CHEN Lihong,GU Hongbin,et al.Progress in study on test facility and experimental technique for model scramjet[J].Advances In Mechanics,2003,33(4):491-498.(in Chinese)
|
| [4] |
Sarisin M N,Ulas A.Investigation of combustion control in the vitiator of a connected pipe setup for ramjet applications [R].Reno Nevada:Aerospace Sciences Meeting And Exhibit,2006.
|
| [5] |
Dunsworth L C,Reed G J.Ramjet engine testing and simulation techniques [R].Las Vegas:Joint Propulsion Conference,1978.
|
| [6] |
Peter H C,Chu C,Marksberry L,et al.High temperature storage heater technology for hypersonic wind tunnels and propulsion test tacilities [R].Capua,Italy:International Space Planes And Hypersonics Systems And Technolo,2005.
|
| [7] |
Andrews E H,Torrelce M G,Anderson G Y,et al.Langley Mach 4 scramjet test facility [R].Virginia:NASA Technical Memorandum,86277,1985.
|
| [8] |
李龙飞,王延涛,杨伟东,等.超声速燃烧地面试验的蓄热式加热器及其关键技术[J].火箭推进,2012,38(2):16-19. LI Longfei,WANG Yantao,YANG Weidong,et al.Thermal energy storage heater and its key technologies for supersonic combustion ground test facilities[J].Journal of Rocket Propulsion,2012,38(2):16-19.(in Chinese)
|
| [9] |
沈赤兵,刘友朋,吴海燕.一种空气加热器的三维流场数值仿真[J].国防科技大学学报,2011,33(1):17-20. SHEN Chibing,LIU Youpeng,WU Haiyan.Numerical simulation of three-dimension flow field in an air-heater[J].Journal of National University of Defense Technology,2011,33(1):17-20.(in Chinese)
|
| [10] |
杨阳,刘伟雄,乐嘉陵,等.直连式脉冲燃烧高温风洞的设计[J].西南交通大学学报,2008,43(3):387-391. YANG Yang,LIU Weixiong,LE Jialing,et al.Design of direct-connect impulse combustion wind tunnel[J].Journal of Southwest Jiaotong University,2008,43(3):387-391.(in Chinese)
|
| [11] |
李小平,葛李虎,栾希亭.加热器在冲压发动机试验技术中的应用研究[J].火箭推进,2007,33(3):14-19. LI Xiaoping,GE Lihu,LUAN Xiting.Applications of gas generator in ramjet direct-connect test facility[J].Journal of Rocket Propulsion,2007,33(3):14-19.(in Chinese)
|
| [12] |
陈超群,韦宝禧,章成亮,等.超燃试验用加热器三维粘性流场数值模拟[J].北京航空航天大学学报,2009,35(5):591-595. CHEN Chaoqun,WEI Baoxi,ZHANG Chengliang,et al.Numerical simulation of three dimension viscous flow of combustion-heater used for scramjet test[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(5):591-595.(in Chinese)
|
| [13] |
王辽,徐旭.超燃冲压发动机地面试验氢燃烧加热器流场数值模拟[J].航空动力学报,2008,23(8):1397-1402. WANG Liao,XU Xu.Numerical investigation of hydrogen combustion-heater for scramjet ground test[J].Journal of Aerospace Power,2008,23(8):1397-1402.(in Chinese)
|
| [14] |
杜正刚,高玉闪,李茂,等.同轴双剪切气-气喷嘴数值模拟[J].航空动力学报,2010,25(4):829-834. DU Zhenggang,GAO Yushan,LI Mao,et al.Numerical simulation of shear dual-coaxial gas-gas injector[J].Journal of Aerospace Power,2010,25(4):829-834.(in Chinese)
|
| [15] |
伍荣林,王振羽.风洞设计原理[M].北京:北京航空学院出版社,1985.
|