| Citation: | ZHANG Xiang, RAO Yu. Flow and heat transfer characteristics in latticework cooling structure with dimple vortex generators[J]. Journal of Aerospace Power, 2013, 28(7): 1503-1509.
|
| [1] |
曹玉璋,陶智,徐国强,等.航空发动机传热学[M].北京:北京航空航天大学出版社,2005.
|
| [2] |
Han J C,Chen H C.Turbine blade internal cooling passages with ribs turbulator[J].AIAA Journal of Propulsion and Power,2006,22(2):226-248.
|
| [3] |
Armstrong J,Winstanley D.A review of staggered array pin fin heat transfer for turbine cooling application[J].Journal of Turbomachinery,1988,110(1):94-103.
|
| [4] |
Chyu M K.Recent advances in turbine heat transfer with a view of transition to coal-gas based systems[J].Journal of Heat Transfer,2012,134(3):031006.1-031006.9
|
| [5] |
RAO Yu,WAN Chaoyi,XU Yamin.An experimental study of pressure loss and heat transfer in the pin fin-dimple channels with various dimple depths[J].International Journal of Heat and Mass Transfer,2012,55(23/24):6723-6733.
|
| [6] |
RAO Yu,ZHANG Xiang,WAN Chaoyi.Pressure loss and heat transfer in channels with pin-fin dimple combined arrays for gas turbine cooling application [R].ACGT2012-4095,2012.
|
| [7] |
Han B,Goldstein R J.Jet impingement heat transfer in gas turbine systems[J].Annals of the New York Academy of Sciences,2001,934(1):147-161.
|
| [8] |
Ligrani P M,Oliveira M M,Blaskovich T.Comparison of heat transfer augmentation techniques[J].AIAA Journal,2003,41(3):337-362.
|
| [9] |
Bunker R S.Latticework (vortex) cooling effectiveness:Part 1 stationary channel experiments [R].ASME Paper,GT-2004-54157,2004.
|
| [10] |
Nagoga G P.Effective methods of cooling of blades of high temperature gas turbine [R].Moscow:Publishing House of Moscow Aerospace Institue Gas Turbine,1996.
|
| [11] |
Acharya S,Zhou F,Lagrone J,et al.Latticework (vortex) cooling effectiveness:Part 2 rotating channel experiments[J].Journal of Turbomachinery,2005,127(3):471-478.
|
| [12] |
Oh I T,Kim K M,Lee D H,et al.Local heat/mass transfer and friction loss measurement in a rotating matrix cooling channel[J].Journal of Heat Transfer,2012,134(1):0119011-0119019.
|
| [13] |
张勃,吉洪湖,张靖周,等.网格式肋化通道换热与总压损失特性研究[J].航空动力学报,2004,19(2):201-205. ZHANG Bo,JI Honghu,ZHANG Jingzhou,et al.Experimental study of heat transfer and total pressure drop of a grid-ribbed rectangular channel[J].Journal of Aerospace Power,2004,19(2):201-205.(in Chinese)
|
| [14] |
刘庆东,秦岭.交错肋结构形式对换热和流阻特性的影响试验研究[J].航空发动机,2007,33(4):36-39. LIU Qingdong,QING Ling.Experimental investigation of heat tranfer and flow resistance characteristics on crossed-rib configuration[J].Aeroengine,2007,33(4):36-39.(in Chinese)
|
| [15] |
丁水汀,秦岭,邓宏武,等.交错肋通道换热和流阻特性的研究[J].航空动力学报,2007,22(2):205-209. DING Shuiting,QING Ling,DENG Hongwu,et al.Experimental investigation of heat transfer and flow resistance in a crossed-rib channel[J].Journal of Aerospace Power,2007,22(2):205-209.(in Chinese)
|
| [16] |
邓宏武,潘文艳,陶智,等.开槽交错肋通道换热和流阻特性[J].北京航空航天大学学报,2007,33(10):1158-1161. DENG Hongwu,PAN Wenyan,TAO Zhi,et al.Heat transfer and flow resistance in a notched crossed-rib channel[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(10):1158-1161.(in Chinese)
|
| [17] |
邓宏武,谭艳,王佳仁,等.带交错肋结构涡轮叶片复合通道的实验[J].航空动力学报,2010,25(9):1931-1937. DENG Hongwu,TAN Yan,WANG Jiaren,et al.Wxperimental study on the turbine blade cooling channel with crossed-ribs[J].Journal of Aerospace Power,2010,25(9):1931-1937.(in Chinese)
|
| [18] |
Dittus F W,Boelter L M K.Publications on engineering[M].California:University of California Press,1930.
|
| [19] |
Kays W M,Crawford,M.E.Convective heat and mass transfer[M].3rd ed.New York:McGraw Hill,1993.
|
| [20] |
Han J C,Park J S,Lei C K.Heat transfer enhancement in channels with turbulence promoters[J].Journal of Engineering for Gas Turbines and Power,1985,107(3):628-635.
|
DownLoad: