Two 3-D multi-cascade co-design inverse methods based on streamline curvature approach and Clebsch formulation for single-stage centrifugal compressors

Two strategies extended the single-cascade methods from a compressible three-dimensional inverse method for radial and mixed flow turbomachines to two three-dimensional multi-cascade co-design methods for single-stage centrifugal compressors.These two three-dimensional methods and a typical quasi-three-dimensional streamline curvature through-flow inverse method were employed to design the same subsonic high-speed single-stage centrifugal compressors.The compressor performances were simulated by a commercial Reynolds averaged Navier-Stokes (RANS) equations solver.The studies show that two three-dimensional co-design methods are reasonable and feasible.It was found that:firstly the blade camber angle designed by the three-dimensional methods was larger than that designed by the quasi-three-dimensional method;and secondly with regard to two three-dimensional methods with different boundary conditions,the co-design result differences between the diffusers were small,but those between the deswirlers were relatively large.