| Citation: | JIANG Jin-ke, FANG Zong-de, SU Jin-zhan. Optimal design of modified helical gear tooth surfaces based on minimum amplitude of loaded transmission error[J]. Journal of Aerospace Power, 2013, 28(7): 1637-1643.
|
| [1] |
袁野.齿轮噪声与齿轮修形[J].机械研究与应用,2006,19(5):7-8. YUAN Ye.The study of gear yawps and gear profiling[J].Mechanical Research and Application,2006,19(5):7-8.(in Chinese)
|
| [2] |
QI Fan.Computerized design of new type spur,helical,spiral bevel and hypoid gear drives [D].Chicago:University of Illinois at Chicago,2002.
|
| [3] |
Litvin F L.Design,generation and stress analysis of face gear drive with helical pinion[J].Computer Methods in Aplied Mechanics and Engineering,2005,194(36/37/38):3870-3901.
|
| [4] |
Litvin F L.Modified involute helical gears computerized design,simulation of meshing and stress analysis[J].Computer Methods in Applied Mechanics and Engineering,2003,192(33/34):3619-3655.
|
| [5] |
Litvin F L,QI Fan.Computerized generation and simulation of meshing of modified spur and helical gears manfactured by shaving[J].Computer Methods in Applied Mchanics and Engineering,2001,190(39):5037-5056.
|
| [6] |
Fuentes A,Nagamoto H,Litvin F L,et al.Computerized design of modified helical gears finished by plunge shaving[J].Computer Methods in Applied Mechanics and Engineering,2010,199(25/26/27/28):1677-1690.
|
| [7] |
方宗德.修形斜齿轮的轮齿接触分析[J].航空动力学报,1997,12(3):247-250. FANG Zongde.Tooth contact analysis of modification of helical gears[J].Journal of Aerospace Power,1997,12(3):247-250.(in Chinese)
|
| [8] |
方宗德,沈允文.斜齿轮三维修形的优化设计[J].机械工程学报,1992,28(6):57-60. FANG Zongde,SHEN Yunwen.Optimal design of 3-D modification of helical gear[J].Chinese Journal of Mechanical Engineering,1992,28(6):57-60.(in Chinese)
|
| [9] |
方宗德,杨宏斌,邓效忠.弧齿锥齿轮齿面优化修正及计算机仿真[J].航空动力学报,2002,17(1):140-143. FANG Zongde,YANG Hongbin,DENG Xiaozhong.Optimal tooth surface correction of spiral bevel gears and computerized simulation[J].Journal of Aerospace Power,2002,17(1):140-143.(in Chinese)
|
| [10] |
王成,方宗德,贾海涛,等.人字齿轮修形优化设计[J].航空动力学报.2009,24(6):1433-1436. WANG Cheng,FANG Zongde,JIA Haitao,et al.Modification optimization of double helical gears[J].Journal of Aerospace Power,2009,24(6):1433-1436.(in Chinese)
|
| [11] |
赵宁,康士朋,郭辉,等.基于遗传算法的弧齿锥齿轮动态特性优化设计[J].航空动力学报,2010,25(10):2396-2402. ZHAO Ning,KANG Shipeng,GUO Hui,et al.Optimization design of spiral bevel gears dynamic characteristicsbased on genetic algorithm[J].Journal of Aerospace Power,2010,25(10):2396-2402.
|
| [12] |
唐增宝,钟毅芳,陈久荣.修形齿轮的最佳修形量和修形长度的确定[J].华中理工大学学报,1995,23(2):125-128. TANG Zengbao,ZHONG Yifang,CHEN Jiurong.Determination of the optimum modifieative number and length for gear profile[J].Journal of Huazhong University of Science and Technology,1995,23(2):125-128.
|
| [13] |
林腾蛟,蒋仁科,李润方,等.船用齿轮箱动态响应及抗冲击性能数值仿真[J].振动与冲击,2007,26(12):14-20. LIN Tengjao,JIANG Renke,LI Runfang.Numerial simulation of dynamic response and shock resistance of marine gearbox[J].Journal of Vibration and Shock,2007,26(12):14-20.(in Chinese)
|
| [14] |
那日萨.三次B样条插值曲面及其实现[J].小型微型计算机系统,1995,16(3):23-28. NA Risa.Cubic spline interpolation surface and its realization[J].Mini-Micro Systems,1995,16(3):23-28.(in Chinese)
|
| [15] |
李敏强,寇纪淞,林丹.遗传算法的基本理论与应用[M].北京:科学出版社,2002.
|
DownLoad: