| Citation: | YANG Xing-yu, DONG Li-wei, ZHENG Xiao-mei, ZHAO Fu-xing. Simulation of extrusion strengthening of pressure equalizing hole of an engine compressor disc and design of extrusion heads[J]. Journal of Aerospace Power, 2013, 28(8): 1769-1776.
|
| [1] |
中国航空科学技术研究院.飞机结构抗疲劳断裂强化设计手册[M].北京:航空工业出版社,1993.
|
| [2] |
中国航空科学技术研究院.飞机结构抗疲劳断裂强化工艺手册[M].北京:航空工业出版社,1993.
|
| [3] |
航空航天部科学技术研究院.近代飞机耐久性设计技术[M].成都:航空航天部AFFD系统工程出版社,1989.
|
| [4] |
Len R.Split sleeve cold expansion as a rework process for previously cold expanded holes [R].Sweden:Presented at ICAF’ 93th International Committee on Aeronautical Fatigue Stockholm,1993.
|
| [5] |
Link R E,Sanford R J.Residual strains surrounding split-sleeve cold expanded holes in 7075-T651 aluminum[J].Journal of Aircraft,1990,27(7):599-604.
|
| [6] |
Gaerke J,Zhang X,Wang Z.Life enhancement of fatigue-aged fastener holes using the cold expansion process[J].Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2000,214(5):281-293.
|
| [7] |
王智,李京珊.影响冷挤压强化效果的因素[J].机械强度,2002,24(2):302-304. WANG Zhi,LI Jingshan.Factors of influencing the beneficial effect of cold expansion[J].Journal of Mechanical Strength,2002,24(2):302-304.(in Chinese)
|
| [8] |
杨兴宇,孟祥明,董立伟.薄板孔边挤压强化对高周疲劳寿命影响的试验[J].航空动力学报,2011,26(2):361-369. YANG Xingyu,MENG Xiangming,DONG Liwei.High cycle fatigue life experiment of sheet metal with coldworking hole [J].Journal of Aerospace Power,2011,26(2):361-369.(in Chinese)
|
| [9] |
杨兴宇,王逾涯,董立伟,等.薄板孔边挤压强化对低周疲劳寿命影响的试验[J].航空动力学报,2011,26(6):1257-1265. YANG Xingyu,WANG Yuya,DONG Liwei,et al.Low cycle fatigue life experiment of sheet metal with coldworking hole[J].Journal of Aerospace Power,2011,26(6):1257-1265.(in Chinese)
|
| [10] |
Carey R P,Hoskin B C.A finite element procedure for interference-fit and cold-working problems with limited yielding [R].Melboucme, Australia:Dept.Defense,Aeronautical Research Laboratories,Structures Report 425, 1986.
|
| [11] |
蒋金龙,赵名泮.冷挤压孔板残余应力场分析[J].航空学报,1991,12(10):511-513. JIANG Jinlong,ZHAO Mingpan.Analysis of residual stress field at coldworking fastener hole[J].Acta Aeronautica et Astronautica Sinica,1991,12(10):511-513.(in Chinese)
|
| [12] |
何世平,张曦,伍小平.铰孔和疲劳对冷挤压孔周残余应力的影响[J].实验力学,1996,11(4):463-467. HE Shiping,ZHANG Xi,WU Xiaoping.The influence of reaming and fatigue on the residual stress around cold-expanded holes[J].Journal of Experimental Mechanics,1996,11(4):463-467.(in Chinese)
|
| [13] |
米谷茂.残余应力的产生和对策[M].朱荆璞,邵会孟,译.北京:机械工业出版社,1983.
|
| [14] |
Bernard M,Bui-Quoc T,Burlat M.Effect of re-coldworking on fatigue life enhancement of a fastener hole[J].Fatigue and Fracture of Engineering Materials and Structures,1995,18(7/8):765-775.
|
| [15] |
Cathey W H,Grandt A F.Fracture mechanics consideration of residual stresses introduced by coldworking fastener holes[J].Journal of Engineering Materials and Technology,1980,102(1):85-91.
|
DownLoad: