| Citation: | TIAN Yong, JI Lu-cheng, LI Wei-wei, YI Wei-lin, XIAO Yun-han. Applicability of blended blade and endwall under different operating conditions[J]. Journal of Aerospace Power, 2013, 28(8): 1905-1913.
|
| [1] |
JI Lucheng,SHAO Weiwei,YI Weilin,et al.A model for describing the influences of SUC-EW dihedral angle on corner separation [C]//Proceedings of the ASME Turbo Expo 2007.Montreal Germany:ASME,2007:219-228.
|
| [2] |
季路成,伊卫林,田勇,等.一种叶轮机械叶片与端壁融合设计方法:中国,CN102094847A [P].2010-06-15. JI Lucheng,YI Weilin,TIAN Yong,et al.A method of designing blended blade and endwall for turbomachinery:China,CN102094847A [P].2010-06-15.(in Chinese)
|
| [3] |
季路成,田勇,李伟伟,等.叶身-端壁融合技术研究[J].航 空发动机,2012,39(6):10-17. JI Lucheng,TIAN Yong,LI Weiwei,et al.Study on blended blade and endwall technique[J].Aeroengine,2012,39(6):10-17.(in Chinese)
|
| [4] |
Curlett B P.The aerodynamic effect of fillet radius in a low speed compressor cascade [R].Washington,DC:NASA Technical Memorandum,105347,1991.
|
| [5] |
Hoeger M,Schmidt-Eisenlohr U.Numerical simulation of the influence of a bulb and a fillet on the secondary flow in a compressor cascade[J].Task Quarterly,2002,6(1):25-38.
|
| [6] |
Hoeger M,Baier R D,Müller R,et al.Impact of a fillet on diffusing vane endwall flow structure [R].Honolulu,US:The 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery,ISROMAC 2006-057,2006.
|
| [7] |
康顺,孙丽萍.叶根倒角对离心叶轮气动性能的影响[J].工程热物理学报.2009,30(1):41-43. KANG Sun,SUN Liping.Influence of root fillet on the aerodynamic performance of centrifugal impeller[J].Journal of Engineering Thermophysics,2009,30(1):41-43.(in Chinese)
|
| [8] |
Goodhand M N,Miller R J.The impact of real geometries on three-dimensional separations in compressors[J].Journal of Turbomachinery,2012,134(2):021007.1-021007.8.
|
| [9] |
Duden A,Raab I,Fottner L.Controlling the secondary flow in a turbine cascade by three-dimensional airfoil design and endwall contouring[J].Journal of Turbomachinery,1999,121(2):191-199.
|
| [10] |
Mahmood G I,Acharya S.Measured endwall flow and passage heat transfer in a linear blade passage with endwall and leading edge modifications [C]//Proceedings of ASME Turbo Expo 2007.Montreal,Canada:ASME,2007:917-930.
|
| [11] |
Nagel M G,Baier R D.Experimentally verified numerical optimization of a three-dimensional parametrized turbine vane with nonaxisymmetric end walls[J].Journal of Turbomachinery,2005,127(2):380-387.
|
| [12] |
Gregory-Smith D,Bagshaw D,Ingram G,et al.Using profiled endwalls,blade lean and leading edge extensions to minimise secondary flow [C]//Proceedings of ASME Turbo Expo 2008.Berlin,Germany:ASME,2008:1301-1311.
|
| [13] |
Bagshaw D A,Ingram G L,Gregory-Smith D G,et al.An experimental study of three-dimensional turbine blades combined with profiled endwalls[J].Journal of Power and Energy,2008,222(1):103-110.
|
| [14] |
Bagshaw D A,Ingram G L,Gregory-Smith D G,et al.The design of three-dimensional turbine blades combined with profiled endwalls[J].Journal of Power and Energy,2008,222(1):93-102.
|
| [15] |
Chima R V.Viscous three-dimensional calculations of transonic fan performance [R].Washington,DC:NASA Technical Memorandum,103800,1991.
|
DownLoad: