| Citation: | XIONG Yan-bin, ZHU Yin-hai, JIANG Pei-xue, HUANG Zheng, LIU Yuan-qing. Experiment of transpiration cooling rules of single phase liquid[J]. Journal of Aerospace Power, 2013, 28(9): 1956-1961.
|
| [1] |
Tani K,Kanda T,Kudou K.Aerodynamic performance of scramjet inlet models with a single strut[J].Journal of Propulsion and Power,2006,22(4):905-912.
|
| [2] |
Tetlow M R,Doolan C J.Comparison of hydrogen and hydrocarbon-fueled scramjet engines for orbital insertion[J].Journal of Spacecraft and Rockets,2007,44(2):365-373.
|
| [3] |
Masuya G,Komuro T,Murakami A,et al.Ignition and combustion performance of scramjet combustors with fuel injection struts[J].Journal of Propulsion and Power,1995,11(2):301-307.
|
| [4] |
Sullins G,Anderson J,Drummond J.Numerical investigation of supersonic base flow with parallel injection[R].AIAA 82-1001,1982.
|
| [5] |
Pandey K M,Sivasakthivel T.CFD analysis of mixing and combustion of a scramjet combustor with a planer strut injector[J].International Journal of Environmental Science and Development,2011,2(2):102-108.
|
| [6] |
Bayley D,Hartfield R.Experimental investigation of angled injection in a compressible flow[R].AIAA 95-2414,1995.
|
| [7] |
Motoyama N.Mihara K,Miyajima R,et al.Thermal protection and drag reduction with use of spike in hypersonic flow[R].AIAA-2001-1828,2001.
|
| [8] |
Bouchez M,Cahuzac G,Beyer S.PTAH-SOCAR fuel-cooled composite materials structure in 2003[R].AIAA-2003-6919,2003.
|
| [9] |
孙冰,郑力铭.超燃冲压发动机支板热环境及热防护方案[J].航空动力学报,2006(2):336-341. [KG3]SUN Bing,ZHENG Liming.Research of scramjet strut thermal environment and thermal protection scheme[J].Journal of Aerospace Power,2006(2):336-341.(in Chinese)
|
| [10] |
Kulkarni P S,Ravi B R,Reddy K.Two dimensional Navier-Stokes solutions for transpiration cooling at hypersonic Mach numbers[J].Shock Waves,2004,13(6):497-500.
|
| [11] |
Reddy N M.Numerical simulation of transpiration cooling over blunt bodies at hypersonic Mach numbers[R].AIAA 95-2082,1995.
|
| [12] |
Foreest A V,Sippel M,Klevanski J,et al.Transpiration cooling to handle the aerothermodynamic challenges of the spaceliner concept[R].Brussels,Belgium:The 2nd European Conference For Aerospace Sciences (Eucass),2007.
|
| [13] |
Bellettre J,Bataille F,Lallemand A,et al.Studies of the transpiration cooling through a sintered stainless steel Plate[J].Experimental Heat Transfer,2005,18(1):33-44.
|
| [14] |
Wang J H,Messner J,Stetter H.An experimental investigation on transpiration cooling:Part Ⅱ comparison of cooling methods and media[J].International Journal of Rotating Machinery,2004,9(10):355-363.
|
| [15] |
Schindel L,Driftmyer R.Surface cooling by transpiration of a freezing liquid[J].Journal of Thermophysics and Heat Transfer,1992,6(1):158-160.
|
| [16] |
Van Foreest A,Sippel M,Güelhan A,et al.Transpiration cooling using liquid water[J].Journal of Thermophysics and Heat Transfer,2009,23(4):693-702.
|
| [17] |
Van Foreest A,Sippel M,Gülhan A,et al.Transpiration cooling methods for the spaceLiner[J].Notes on Numerical Fluid Mechanics and Multidisciplinary Design,2008,98(1):170-185.
|
| [18] |
Henry C L,Delametter J E.Scramjet fuel injection system having independent fuel supplies for supersonic and hypersonic operation:United States,5660040[P].1997-08-26.
|
| [19] |
Bulman M J.Transpiration cooling for a vehicle with low radius leading edge:United States,5452866[P].1995-09-26.
|
| [20] |
Chevalier A,Bouchez M.Fuel-injecting apparatus for ramjet engine cooled by transpiration:United States,6164061[P].2000-12-26.
|
| [21] |
Bouchez M,Chevalier A.Transpiration cooled fuel injector bar for a ramjet engine:Europe,EP0846920 B1[P].2003-06-11.
|
| [22] |
Bulman M J,Transpiration cooling for a vehicle with low radius leading edges:United States,5351917[P].1994-10-04.
|
DownLoad: