| Citation: | LUO Bin, DING Shui-ting, LI Guo. A parametric lightweight turbine disk structure CAD/CAE integration method[J]. Journal of Aerospace Power, 2013, 28(9): 2083-2089.
|
| [1] |
江义军.推重比12—15发动机技术途径分析[J].航空动力学报,2001,16(2):103-106. JIANG Yijun.Technical approaches to thrust-weight ratio 12-15 of aeroengine[J].Journal of Aerospace Power,2001,16(2):103-106.(in Chinese)
|
| [2] |
周强.世界军用航空动力技术的现状与展望[J].长沙航空职业技术学院学报,2003,3(1):26-30. ZHOU Qiang.Current status and development direction of military aircraft power technology in the world[J].Changsha Aeronautical Vocational and Technical College Journal,2003,3(1):26-30.(in Chinese)
|
| [3] |
付德斌,丁水汀,陶智,等.一种基于热管理的热端部件轻量化研究[J].航空动力学报,2011,26(4):814-821. FU Debin,DING Shuiting,TAO Zhi,et al.Study on heated components mass reduction based on thermal management[J].Journal of Aerospace Power,2011,26(4):814-821.(in Chinese)
|
| [4] |
付德斌,丁水汀,陶智,等.旋转盘应力水平与温度分布的关联分析[J].航空动力学报,2008,23(4):623-628. FU Debin,DING Shuiting,TAO Zhi,et al.Analysis of the effects of temperature distribution on stress level in a rotating disk[J].Journal of Aerospace Power,2011,26(4):814-821.(in Chinese)
|
| [5] |
彭波,杨岳,苏春模.采用SolidWorks API的离心式叶轮参数化建模[J].工程图学学报,2009,30(5):1-7. PENG Bo,YANG Yue,SU Chunmo.Parametric modeling of centrifugal impeller based on SolidWorks API[J].Journal of Engineering Graphics,2009,30(5):1-7.(in Chinese)
|
| [6] |
冯佰威,刘祖源,詹成胜,等.船舶CAD/CFD一体化设计过程集成技术研究[J].武汉理工大学学报,2010,34(4):649-651. FENG Baiwei,LIU Zuyuan,ZHAN Chengsheng,et al.Research on process integration of the integrated optimization of the ship CAD/CFD[J].Journal of Wuhan University of Technology,2010,34(4):649-651.(in Chinese)
|
| [7] |
李中云,蔡兆麟.风机CAD-CAE设计中的参数化[J].通用机械,2003(3):27-29.
|
| [8] |
石梦华,赵坚行,颜应文,等.航空发动机燃烧室参数化建模[J].航空发动机,2011,37(5):11-15. SHI Menghua,ZHAO Jianxing,YAN Yingwen,et al.Aeroengine combustion parametric modeling[J].Aeroengine,2011,37(5):11-15.(in Chinese)
|
| [9] |
赵曜,于庆波,李榕.基于参数化设计的轧钢加热炉CAD/CAE集成方法[J].中国冶金,2011,21(3):35-38. ZHAO Yao,YU Qingbo,LI Rong.Investigations on CAD/CAE integration method for steel rolling heating furnace based on parametric design technology[J].China Metallurgy,2011,21(3):35-38.(in Chinese)
|
| [10] |
陈晓霞,邢静忠.CAD/CAE集成的三偏心蝶阀参数化设计[J].工程图学学报,2009,30(1):37-40. CHEN Xiaoxia,XING Jingzhong.Parametric design of three-eccentric butterfly valve based on CAD/CAE integrated[J].Journal of Engineering Graphics,2009,30(1):37-40.(in Chinese)
|
| [11] |
纪福森,吴铁鹰,陈伟.参数化CAD/CAE集成与应用[J].机电工程技术,2006,35(6):86-88. JI Fusen,WU Tieying,CHEN Wei.Integration and application of parametric CAD/CAE[J].Mechanical and Electrical Engineering Technology,2006,35(6):86-88.(in Chinese)
|
| [12] |
何晓华,王振荣.基于ANSYS的汽车齿轮参数化建模及有限元分析[J].汽车齿轮,2011(1):43-49. HE Xiaohua,WANG Zhenrong.Parametric modeling and finite element analysis of automobile gear based on ANSYS[J].Automobile Gear,2011(1):43-49.(in Chinese)
|
| [13] |
袁安富,郑祺.基于APDL的斜齿轮造型技术[J].机械传动,2009,33(2):53-55. YUAN Anfu,ZHENG Qi.Modeling technology of helical gear based on APDL[J].Journal of Mechanical Transmission,2009,33(2):53-55.(in Chinese)
|
| [14] |
张军,兆文忠,李永华,等.基于APDL高速铝合金车体参数化建模[J].大连交通大学学报,2009,30(4):13-17. ZHANG Jun,ZHAO Wenzhong,LI Yonghua,et al.Research on parameter modeling for aluminum alloy rail vehicle body[J].Journal of Dalian Jiaotong University,2009,30(4):13-17.(in Chinese)
|
| [15] |
郦仕云,宁汝新,徐劲祥,等.气动和结构多学科优化设计过程集成技术研究[J].系统仿真学报,2007,19(4):852-855. LI Shiyun,NING Ruxin,XU Jinxiang,et al.Research of integration technology of multidisciplinary design optimization of aerodynamic and structure[J].Journal of System Simulation,2007,19(4):852-855.(in Chinese)
|
DownLoad: