| Citation: | SUN Yong-zheng, ZHU Ru-peng, BAO He-yun. Calculation of mean friction coefficient in scuffing strength for gear drive with meshing beyond pitch point[J]. Journal of Aerospace Power, 2013, 28(9): 2155-2160.
|
| [1] |
高明, 周英.节点外啮合理论应用在直齿圆柱齿轮变位系数优化中的研究[J].机械,1997,24(2):2-4. GAO Ming,ZHOU Ying.Study of addendum modification coefficient optimization of spur gear engaging beyond pitch point[J].Machinery,1997,24(2):2-4.(in Chinese)
|
| [2] |
王保民,蒋学全.少齿数渐开线齿轮副啮合区域的研究[J].陕西工学院学报,2001,17(4):1-3. WANG Baoming,JIANG Xuequan.Study of little teeth number involute gear-pair’s engagement field[J].Journal of Shaanxi Institute of Technology,2001,17(4):1-3.(in Chinese)
|
| [3] |
蒋生发.节点外啮合齿轮传动的性能分析[J].江苏工学院学报,1984(1):56-61. JIANG Shengfa.Performance analysis of gear drive with meshing beyond pitch piont[J].Journal of Jiangsu Institute of Technology,1984(1):56-61.(in Chinese)
|
| [4] |
章永锋,刘卫真,艾永生.航标渐开线圆柱齿轮接触应力基本值计算方法的修订建议[J].航空标准化与质量, 2009,6(1):15-18. ZHANG Yongfeng,LIU Weizhen,AI Yongsheng.Modification proposal on the calculation method of contact stress basic value of involute cylindrical gear[J].Aeronautic Standardization and Quality,2009, 6(1):15-18.(in Chinese)
|
| [5] |
航空工业部标准编制组.《航空渐开线圆柱齿轮胶合承载能力计算》介绍[J].航空标准化,1985(1):29-40.
|
| [6] |
Britton R D,Elcoate C D,Elanou M P,et al.Effect of surface finish on gear tooth friction[J].Journal of Tribology,2000,122(1):354-360.
|
| [7] |
Vaishya M,Houser D R.Modeling and analysis of sliding friction in gear dynamics[C]//Proceedings of the 2000 ASME Design Engineering Technical Conferences.Baltimore,US:ASME,2000:601-610.
|
| [8] |
Velex P,Cahouet V.Experimental and numerical investigations on the influence of tooth friction in spur and helical gear dynamics[J].Journal of Mechanical Design,2000,122(12):515-522.
|
| [9] |
Vaishya M,Singh R.Sliding friction-induced non-linearity and parametric effects in gear dynamics[J].Journal of Sound and Vibration,2001,248(4):671-694.
|
| [10] |
王永洁.齿轮胶合计算中平均闪温和重合度系数的探讨[J].哈尔滨工业大学学报,1986,6(sup):60-69. WANG Yongjie.Average temperature increase and contact ratio in the method of integral temperature[J].Journal of Harbin Institute of Technology,1986,6(sup):60-69.(in Chinese)
|
| [11] |
张展,朱景梓,秦立高.渐开线内啮合圆柱齿轮传动[M].北京:国防工业出版社, 1991.
|
| [12] |
Vaishya M,Singh R.Strategies for modeling friction in gear dynamics[J].Journal of Mechanical Design, 2003,125(6):383-393.
|
| [13] |
Velex P,Sainsot P.An analytical study of tooth friction excitations in errorless spur and helical gears[J].Mechanism and Machine Theory,2002,37(7):641-658.
|
| [14] |
He S,Cho S,Singh R.Prediction of dynamic friction forces in spur gears using alternate sliding friction formulations[J].Journal of Sound and Vibration,2008, 309(1):843-851.
|
| [15] |
Diab Y,Ville F,Velex P.Prediction of power losses due to tooth friction in gears[J].Tribology Transmission, 2006,49(2):260-270.
|
DownLoad: