Volume 28 Issue 11
Nov.  2013
Turn off MathJax
Article Contents
LI Yong-zhou, ZHANG Kun-yuan, LUO Lei, WANG Lei. Modified axisymmetric basic flowfield for hypersonic inward turning inlet[J]. Journal of Aerospace Power, 2013, 28(11): 2543-2552.
Citation: LI Yong-zhou, ZHANG Kun-yuan, LUO Lei, WANG Lei. Modified axisymmetric basic flowfield for hypersonic inward turning inlet[J]. Journal of Aerospace Power, 2013, 28(11): 2543-2552.

Modified axisymmetric basic flowfield for hypersonic inward turning inlet

  • Received Date: 2012-10-31
  • Publish Date: 2013-11-28
  • The leading edge shock wave near the center body,which is too intensive in axisymmetric basic flowfield,was separated into one curved shock and partial isentropic compression wave using the design method of controllable Mach number distribution.With a structure of four shock waves and four regions,the modified basic flowfield could improve compression efficiency obviously.The circular intake inward turning inlets for modified basic flowfield and common basic flowfield of two shock waves and three regions were designed,and also numerically studied to obtain the flowfield characteristics and general performance.The results indicate the modified inlet has similar flowfield characteristics for the basic flowfield.It features high compression ratio and mass flow capture capability for Mach number of 4.0 to 7.0,and the pressure ratio and total pressure recovery coefficient are 17.56 and 0.540,respectively,at the design point.Besides,the leading shock and converged isentropic compression wave attached the cowl lip in turn while the Mach number of incoming flow varied from high to low,increasing the mass capture ratio and decreasing the total pressure loss.Its overall performance is better than common one with 23.6% higher total pressure recovery coefficient at Mach number of 7.0 and 5.7% higher mass flow coefficient at Mach number of 4.0.

     

  • loading
  • [1]
    Van Wie D,Mlder S.Applications of Busemann inlets design for flight at hypersonic speeds.AIAA 92-1210,1992.
    [2]
    SUN Bo,ZHANG Kunyuan,WANG Chengpeng,et al.Investigation on a streamtraced hypersonic busemann inlet[J].Journal of Aerospace Engineering,2010,224(1):57-63.
    [3]
    Smart M K.Design of three-dimensional hypersonic inlets with rectangular-to-elliptical shape transition[J].Journal of Propulsion and Power,1999,15(3):408-416.
    [4]
    贺旭照,乐嘉陵,宋文燕,等.基于轴对称喷管的三维内收缩进气道的设计与初步评估[J].推进技术,2010,31(2):147-152. HE Xuzhao,LE Jialing,SONG Wenyan,et al.3D inward turning inlet design basing on axisymmetric nozzle and its preliminary assessment[J].Journal of Propulsion Technology,2010,31(2):147-152.(in Chinese)
    [5]
    Matthews A J,Jones T V.Design and test of a modular waverider hypersonic intake.AIAA-2005-3379,2005.
    [6]
    尤延铖,梁德旺.内乘波式进气道内收缩基本流场研究[J].空气动力学学报,2008,26(2):203-207. YOU Yancheng,LIANG Dewang.Investigation of internal compression flowfield for internal waverider-derived inlet[J].Acta Aerodynamica Sinica,2008,26(2):203-207.(in Chinese)
    [7]
    南向军,张堃元,金志光,等.压升规律可控的高超声速内收缩进气道设计[J].航空动力学报,2011,26(3):518-523. NAN Xiangjun,ZHANG Kunyuan,JIN Zhiguang,et al.Investigation on hypersonic inward turning inlets with controlled pressure gradient[J].Journal of Aerospace Power,2011,26(3):518-523.(in Chinese)
    [8]
    李永洲,张堃元,南向军.基于马赫数分布规律可控概念的高超声速内收缩进气道设计[J].航空动力学报,2012,27(11):2484-2491. LI Yongzhou,ZHANG Kunyuan,NAN Xiangjun.Design of hypersonic inward turning inlets based on concept of controllable Mach number distribution[J].Journal of Aerospace Power,2012,27(11):2484-2491.(in Chinese)
    [9]
    郭军亮,黄国平,尤延铖,等.改善内乘波式进气道出口均匀性的内收缩基本流场研究[J].宇航学报,2009,30(5):1934-1940. GUO Junliang,HUANG Guoping,YOU Yancheng,et al.Study of internal compression flow field for improving the outflow uniformity of internal wave rider inlet[J].Journal of Astronautics,2009,30(5):1934-1940.(in Chinese)
    [10]
    Billig F S,Baurle R A,Tam C J,et al.Design and analysis of streamline traced hypersonic inlets.AIAA 99-4974,1999.
    [11]
    Ramasubramanian V,Lewis M,Starkey R.Performance of various truncation strategies employed on hypersonic Busemann inlets.AIAA 2009-7249,2009.
    [12]
    Oswatish K.Pressure recovery in missiles with reaction propulsion at high supersonic speeds.NACA TM 1140,1947.
    [13]
    Smart M K.Optimization of two-dimensional scramjet inlets[J].Journal of Aircraft,1999,36(2):430-433.
    [14]
    陈兵,徐旭,王元光,等.定几何混压式轴对称超声速进气道设计及性能计算[J].航空动力学报,2005,20(3):373-379. CHEN Bing,XU Xu,WANG Yuanguang,et al.Design and performance calculation the mixed-compression fixed-geometry axisymmetric supersonic inlets[J].Journal of Aerospace Power,2005,20(3):373-379.(in Chinese)
    [15]
    李永洲,张堃元,李志华,等.Ma数分布可控的高超内收缩进气道改进设计初探.长沙:2012年火箭推进技术学术年会,2012.
    [16]
    Drayna T W,Nompelis I,Candler G V.Hypersonic inward turning inlets:design and optimization.AIAA-2006-297,2006.
    [17]
    南向军,张堃元,金志光,等.矩形转圆形高超声速内收缩进气道数值及实验研究[J].航空学报,2011,32(6):988-996. NAN Xiangjun,ZHANG Kunyuan,JIN Zhiguang,et al.Numerical and experimental investigation of hypersonic inward turning inlets with rectangular to circular shape transition[J].Acta Aeronautica et Astronautica Sinica,2011,32(6):988-996.(in Chinese)
    [18]
    王翼,范晓樯,梁剑寒,等.三维侧压高超声速进气道不启动流场试验与数值模拟研究[J].宇航学报,2008,29(6):1927-1932. WANG Yi,FAN Xiaoqiang,LIANG Jianhan,et al.Experimental and numerical investigation on the unstart flowfield of a three-dimensional sidewall compression hypersonic inlet[J].Journal of Astronautics,2008,29(6):1927-1932.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1809) PDF downloads(859) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return