| Citation: | YU Lei, CHANG Hai-ping, HU Zheng-quan. Experiment and numerical simulation of heat transfer characteristics in turbine shroud[J]. Journal of Aerospace Power, 2013, 28(12): 2717-2724.
|
| [1] |
Came P M.Tip clearance losses in turbines:a review of experimental data and prediction methods[R].NGTE/NT 1969-754, 1969.
|
| [2] |
Mayle R E, Metzger D E.Heat transfer at the tip of an unshrouded turbine blade[C]//Proceedings of the Seventh International Heat Transfer Conference.Munich, West Gemany:Hemisphere Publications, 1982:87-92.
|
| [3] |
Bindon J P.Pressure distributions in the tip clearance region of an unshrouded axial turbine as affecting the problem of tip burnout[R].ASME Paper 87-GT-230, 1987.
|
| [4] |
Ameri A A, Steinthorsson E, Rigby D L.Effect of squealer tip on rotor heat transfer and efficiency[J].Journal of Turbomachinery, 1997, 120(4):753-759.
|
| [5] |
Bunker R S, Bailey J C.Effect of squealer cavity depth and oxidation on turbine blade tip heat transfer[R].ASME Paper 2001-GT-155, 2001.
|
| [6] |
Kwak J S, Ahn J, Han J C, et al.Heat transfer coefficients on the squealer tip and near-tip regions of a gas turbine blade with single or double squealer[R].ASME Paper 2003-GT-38907, 2003.
|
| [7] |
Denton J D, Johnson C G.An experimental study of the tip leakage flow around shrouded turbine blades[R].Central Electricity Generating Board (CEGB) Report R/M/N848, 1976.
|
| [8] |
Denton J D.Loss mechanisms in turbomachines[R].ASME Paper 93-GT-435, 1993.
|
| [9] |
Pfau A, Kalfas A I, Abhari R S.Making use of labyrinth interaction flow[R]. ASME Paper 2004-GT-53797, 2004.
|
| [10] |
Rosic B, Denton J D, Curtis E M.The influence of shroud and cavity geometry on turbine performance:an experimental and computational study:Part Ⅰ shroud geometry[R].ASME Paper 2007-GT-27769, 2007.
|
| [11] |
Nirmalan N V, Bailey J C, Braaten M E.Experimental and computational investigation of heat transfer effectiveness and pressure distribution of a shrouded blade tip section[R].ASME Paper 2004-GT-53279.
|
| [12] |
Chyu M K, Moon H K, Metzger D E.Heat transfer in the tip region of grooved turbine blades[J].Journal of Turbomachinery, 1989, 111(2):131-138.
|
| [13] |
Ameri A A, Bunker R S.Heat transfer and flow on the first stage blade tip of a power generation gas turbine:Part 2 simulation results[R].Indianapolis:International Gas Turbine Conference, 1999.
|
| [14] |
Tallman J, Lakshminarayana B.Numerical simulation of tip leakage flows in axial flow turbines, with emphasis on flow physics:Part Ⅰ effect of tip clearance height[R].ASME Paper 2000-GT-0514, 2000.
|
| [15] |
Tallman J, Lakshminarayana B.Numerical simulation of tip leakage flows in axial flow turbines, with emphasis on flow physics:Part Ⅱ effect of outer casing relative motion[R].ASME Paper 2000-GT-0516, 2000.
|
| [16] |
李伟, 乔渭阳, 许开富, 等.雷诺数对涡轮叶尖流场影响的数值研究[J].推进技术, 2007, 28(4):388-393. LI Wei, QIAO Weiyang, XU Kaifu, et al.Numerical simulation for effects of Reynolds numbers on tip leakage flows in turbine[J].Journal of Propulsion Technology, 2007, 28(4):388-393.(in Chinese)
|
| [17] |
Xiao Y, Amano R S.Study of losses in a leakage flow through the passage of a shrouded turbine blades with swirl velocity[R].New Orleans:International Gas Turbine Conference, 2001.
|
| [18] |
Morphis G, Bindon J P.The effects of relative motion, blade edge radius and gap size on the blade tip pressure distribution in an annular turbine cascade[R].ASME Paper 88-GT-256, 1988.
|
DownLoad: