| Citation: | ZHANG Ling-jun, LUO Xiang, YU Hong-peng, GUO Jun. Experiment on gas ingestion on forward disk cavity of 1.5 stage turbine rig[J]. Journal of Aerospace Power, 2013, 28(12): 2746-2751. |
| [1] |
Campbell D A.Gas turbine disc sealing system design[R]. AGARD-CP-237, 1978.
|
| [2] |
Abe T, Kikuchi J, Takeuchi H.An investigation of turbine disc cooling[R].Vienna:3rd CIMAC Congress, 1979.
|
| [3] |
Kobayashi N, Matsumato M, Shizuya M.An experimental investigation of a gas turbine disc cooling system[J].Journal of Engineering for Gas Turbines and Power, 1984, 106(1):136-141.
|
| [4] |
Roy R P, Feng J, Narzary D, et al.Experiments on gas ingestion through axial-flow turbine rim seals[R].ASME Paper GT-2004-53394, 2004.
|
| [5] |
Narzary D, Feng J, Roy R P.Ingestion into a rotor-stator disk cavity with single-and double-rim seals[R].AIAA-2005-3982, 2005.
|
| [6] |
Roy R P, Devasenathipathy S, Xu G, et al.A study of the flow field in a model rotor-stator disk cavity[R].ASME Paper 99-GT-246, 1999.
|
| [7] |
Roy R P, Xu G, Feng J.Study of main-stream gas ingestion in a rotor-stator disk cavity[R].AIAA-2000-3372, 2000.
|
| [8] |
Roy R P, Xu G, Feng J, et al.Pressure fieldand main stream gas ingestion in rotor stator disk cavity[R].ASME Paper 2001-GT-564, 2001.
|
| [9] |
Roy R P, Xu G, Feng J, et al.A study of convective heat transfer in a model rotor-stator disk cavity[J].Journal of Turbomachinery, 2001, 123(3):621-632.
|
| [10] |
Zhou D, Roy R, Wang C, et al.Main gas ingestion in a turbine stage for three rim cavity configurations[C]//Proceedings of ASME Turbo Expo 2009.Orlando, FL, USA:American Society of Mechanical Engineers, 2009:1239-1252.
|
| [11] |
Bohn D E, Decker A, Ohlendorf N, et al.Influence of an axial and radial rim seal geometry on hot gas ingestion into the upstream cavity of a 1.5-stage turbine[R].ASME Paper GT-2006-90453, 2006.
|
| [12] |
Gallier K D, Lawless P B, Fleeter S.Investigation of seal purge flow effects on the hub flow field in a turbine stage using particle image velocimetry[R].AIAA-2000-3370, 2000.
|
| [13] |
Dierksheide U, Meyer P, Hovestadt T.Endoscopic 2D particle image velocimetry (PIV) flow field measurements in IC engines[J].Experiments in Fluids, 2002, 33(6):794-800.
|
| [14] |
Owen J M.Prediction of ingestion through turbine rim seals:Part 1 rotationally-induced ingress[R].ASME Paper GT-2009-29121, 2009.
|
| [15] |
Owen J M.Prediction of ingestion through turbine rim seals:Part 2 externally-induced and combined ingress[R].ASME Paper GT-2009-29122, 2009.
|