| Citation: | CAI Chao-zhi, LI Yun-hua, TENG Feng-jian, DONG Su-jun. Coordinated control of dual-channel flow-rate for fuel supply system of high-speed heat-airflow wind tunnel[J]. Journal of Aerospace Power, 2013, 28(12): 2842-2848.
|
| [1] |
赵时安, 廖理, 陈勇.1700℃热校准风洞[J].航空计测技术, 2000, 20(4):3-6. ZHAO Shian, LIAO Li, CHEN Yong.1700℃ hot wind tunnel for thermal calibration[J].Aviation Measuring and Testing Technology, 2000, 20(4):3-6.(in Chinese)
|
| [2] |
Li S E, PENG Huei, LI Keqiang, et al.Minimum fuel control strategy in automated car-following scenarios[J].IEEE Transactions on Vehicular Technology, 2012, 61(3):998-1008.
|
| [3] |
XU Shuhui, ZHOU Minglian, DONG Haiguang.High temperature hydraulic pump and flow control based on frequency conversion technology//Proceedings of the 2010 IEEE International Conference on Mechatronics and Automation.Xi'an:IEEE, 2010:1203-1208.
|
| [4] |
张林, 李运华.基于变频调速的燃油供给系统的设计与实现[J].液压气动与密封, 2010, 30(4):10-12. ZHANG Lin, LI Yunhua.Design and implementation of fuel supply system based on variable frequency speed-regulating technology[J].Hydraulics Pneumatics and Seals, 2010, 30(4):10-12.(in Chinese)
|
| [5] |
LI Yunhua, CAI Chaozhi, LIU Tao, et al.Study on control strategies for oil-fuel supply system used in supersonic combus tion wind tunnel//Proceedings of the 2011 Fluid Power and Mechatronics.Beijing:Beijing University of Aeronautics and Astronautics, 2011:732-737.
|
| [6] |
刘涛, 李运华, 张林.变频驱动容积式供油系统的流量预估控制[J].液压气动与密封, 2011, 31(2):52-56. LIU Tao, LI Yunhua, ZHANG Lin.Flow rate predictive control for volumetric type of fuel oil supplying system driven by variable frequency induction motor[J].Hydraulics Pneumatics and Seals, 2011, 31(2):52-56.(in Chinese)
|
| [7] |
Jeremy R C, Charlie A E, Rida T F, et al.Performance analysis of cross-coupled controllers for CNC machines based upon precise real-time contour error measurement[J].International Journal of Machine Tools and Manufacture, 2012, 52(1):30-39.
|
| [8] |
HUO Feng, Poo A N.Improving contouring accuracy by using generalized cross-coupled control[J].International Journal of Machine Tools and Manufacture, 2012, 63:49-57.
|
| [9] |
SU Kehan, CHENG Yangming.Contouring accuracy improvement using cross-coupled control and position error compensator[J].International Journal of Machine Tools and Manufacture, 2008, 48(12/13):1444-1453.
|
| [10] |
Shih Y T, Chen C S, Lee A C.A novel cross-coupling control design for bi-axis motion[J].International Journal of Machine Tool and Manufacture, 2002, 42(14):1539-1548.
|
| [11] |
刘涛.超燃风洞双路燃油供给系统的协调控制策略研究.北京:北京航空航天大学, 2011. LIU Tao.Study of coordinated control strategy for two-channel oil-fuel supply system used in supersonic combustion wind tunnel.Beijing:Beijing University of Aeronautics and Astronautics, 2011.(in Chinese)
|
| [12] |
蔡超志, 李运华, 滕丰健.高速热气流模拟风洞的供油流量控制[J].北京航空航天大学学报, 2013, 39(4):544-548. CAI Chaozhi, LI Yunhua, TENG Fengjian.Control of fuel flow-rate supply system in high-speed airflow thermal simulation tunnel[J].Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(4):544-548.(in Chinese)
|
| [13] |
Camacho O, Rojas R, Garcia W G.Some long time delay sliding mode control approaches[J].ISA Transactions, 2007, 46(3):95-101.
|
| [14] |
丁虎, 张健沛.船用锅炉蒸汽压力系统的滑模预测控制[J].哈尔滨工程大学学报, 2010, 31(8):1039-1042. DING Hu, ZHANG Jianpei.Sliding mode predictive controller for a ship boiler steam pressure system[J].Journal of Harbin Engineering University, 2010, 31(8):1039-1042.(in Chinese)
|
| [15] |
Garcia-Gabin W, Zambrano D, Camcho E F.Sliding mode predictive control for chemical process with time delay//in 16th IFAC World Congress.Prague:Czech Republic, 2007:468-471.
|
DownLoad: