| Citation: | DONG Hong, WEN Xue-you, LI Ming-jia, HE Xing. Coupled heat transfer numerical simulation of wall temperature of can-annular combustor flame tube[J]. Journal of Aerospace Power, 2014, (5): 1071-1078.
|
| [1] |
董志锐.具有陶瓷涂层的火焰筒壁温和热流计算[J].航空学报, 1993, 14(2):B109-B112. DONG Zhirui.Numerical method for calculating wall temperature and heat flow of flame tube with ceramic coating[J].Acta Aeronautica et Astronautica Sinica, 1993, 14(2):B109-B112.(in Chinese)
|
| [2] |
Pai B R, Whitelaw J.The predications of wall temperature in the presence of film cooling[J].Heat and Mass Transfer, 1971, 21(5):23-31.
|
| [3] |
邢玉明, 赵云惠, 王丰.某发动机气膜冷却火焰筒壁温的数值计算[J].北京航空航天大学学报, 1997, 23(2):173-177. XING Yumin, ZHAO Yunhui, WANG Feng.Numerical calculation of a gas turbine liner wall temperature in the presence of film cooling[J].Journal of Beijing University of Aeronautics and Astronautics, 1997, 23(2):173-177.(in Chinese)
|
| [4] |
李名魁, 何立明, 蒋永健.燃烧室新型迷宫复合冷却结构二维壁温数值模拟[J].机械科学与技术, 2007, 26(2):245-248. LI Mingkui, HE Liming, JIANG Yongjian.Numerical simulation of 2-D wall temperature of combustor's maze composite cooling structure[J].Mechanical Science and Technology, 2007, 26(2):245-248.(in Chinese)
|
| [5] |
韩振兴, 朱谷君.气膜冷却燃烧室火焰筒二维壁温分布计算[J].航空动力学报, 1995, 10(1):83-86. HAN Zhenxing, ZHU Gujun.2-D wall temperature distribution calculation of an air-film cooled combustor liner[J].Journal of Aerospace Power, 1995, 10(1):83-86.(in Chinese)
|
| [6] |
李名家, 曲哲, 林枫, 等.有隔热涂层的气膜冷却火焰筒壁温计算[J].热能动力工程, 2008, 23(9):481-484. LI Mingjia, QU Zhe, LIN Feng, et al.Wall temperature calculation of an air-film cooled flame tube with a heat insulation coating[J].Journal of Engineering for Thermal Energy and Power, 2008, 23(9):481-484.(in Chinese)
|
| [7] |
穆勇, 郑洪涛, 李志明, 等.燃气轮机双燃料燃烧室流场对比数值研究[J].航空动力学报, 2009, 24(9):1937-1944. MU Yong, ZHENG Hongtao, LI Zhiming, et al.Comparative numerical simulation of combustion flows in a dual-fuel-combustor[J].Journal of Aerospace Power, 2009, 24(9):1937-1944.(in Chinese)
|
| [8] |
高金海, 王建军, 马艳红, 等.基于热-流-固耦合方法火焰筒壁温三维数值模拟[J].北京航空航天大学学报, 2011, 37(3):300-304. GAO Jinhai, WANG Jianjun, MA Yanhong, et al.Numerical simulation of three dimensional wall temperature of combustor liner based on thermal-fluid-solid coupling method[J].Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(3):300-304.(in Chinese)
|
| [9] |
胡好生, 蔡文祥, 赵坚行, 等.回流燃烧室燃烧过程的三维数值模拟[J].航空动力学报, 2008, 23(3):454-459. HU Haosheng, CAI Wenxiang, ZHAO Jianxing, et al.Numerical simulation of three-dimensional combustion flows in annular reversed combustor[J].Journal of Aerospace Power, 2008, 23(3):454-459.(in Chinese)
|
| [10] |
张勃, 吉洪湖, 杨芳芳, 等.多斜孔壁与机加环气膜冷却燃烧室的壁面换热特性数值研究[J].航空动力学报, 2012, 27(4):832-836. ZHANG Bo, JI Honghu, YANG Fangfang, et al.Numerical investigation of heat transfer characteristics of effusion cooling and machinery film cooling combustors[J].Journal of Aerospace Power, 2012, 27(4):832-836.(in Chinese)
|
| [11] |
蔡文祥, 赵坚行, 胡好生.回流环形燃烧室反应流场数值模拟[J].航空动力学报, 2012, 27(3):544-550. CAI Wenxiang, ZHAO Jianxing, HU Haosheng.Numerical simulation of reacting flow field in reverse-flow annular combustor[J].Journal of Aerospace Power, 2012, 27(3):544-550.(in Chinese)
|
| [12] |
王福军.计算流体动力学分析:CFD软件原理与应用[M].北京:清华大学出版社, 2007.
|
| [13] |
张财红.旋流强度对液雾燃烧影响的数值模拟[D].天津:河北工业大学, 2007. ZHANG Caihong.Numerical simulation of the influences of swirl intensity on spray combustion[D].Tianjin:Hebei University of Technology, 2007.(in Chinese)
|
| [14] |
董平.航空发动机气冷涡轮叶片的气热耦合数值模拟研究[D].哈尔滨:哈尔滨工业大学, 2009. DONG Ping.Research on conjugate heat transfer simulation of aero turbine engine air-cooled vane[D].Harbin:Harbin Institute of Technology, 2009.(in Chinese)
|
| [15] |
范作民, 傅巽权.热力过程计算与燃气表[M].北京:国防工业出版社, 1987.
|
DownLoad: