| Citation: | LIU Dong-jian, LI Jun, JIANG Ai-wu, LI Cheng-long, LI Fan-yu. Observation and analysis of flow features in blade tip region of compressor rotor[J]. Journal of Aerospace Power, 2014, (5): 1163-1169.
|
| [1] |
Yamada K, Kikuta H, Iwakiri K, et al.An explanation for flow features of spike-type stall inception in an axial compressor rotor[J].Journal of Turbomachinery, 2013, 135(2):021023.1-021023.11.
|
| [2] |
Yamada K, Kikuta H, Furukawa M, et al.Effects of tip clearance on the stall inception process in an axial compressor rotor[R].ASME Paper GT2013-95479, 2013.
|
| [3] |
Camp T R, Day I J.A study of spike and modal stall phenomena in a low-speed axial compressor[J].Journal of Turbomachinery, 1998, 120(3):393-401.
|
| [4] |
Pullan G, Young A M, Day I J, et al.Origins and structure of spike-type rotating stall[R].ASME Paper GT2012-68707, 2012.
|
| [5] |
Hoying D A, Tan C S, Vo H D, et al.Role of blade passage flow structures in axial compressor rotating stall inception[J].Journal of Turbomachinery, 1999, 121(4):735-742.
|
| [6] |
Vo H D.Role of tip clearance flow in rotating instabilities and nonsynchornous vibration[J].Journal of Propusion and Power, 2010, 26(3):556-561.
|
| [7] |
Vo H D, Tan C S, Greitzer E M.Criteria for spike initiated rotating stall[J].Journal of Turbomachinery, 2008, 130(1):1-9.
|
| [8] |
Weichert S A.Tip clearance flows in axial compressors:stall inception and stability enhancement[D].Cambridge, UK:University of Cambridge, 2011.
|
| [9] |
Baghdadi S.Modeling tip clearance effects in multi-stage axial compressors[J].Journal of Turbomachinery, 1996, 118(4):697-705.
|
| [10] |
吴艳辉, 吴俊峰, 稂仿玉, 等.轴流压气机转子近叶尖流动的试验和数值研究之一:准定常工况流动特征分析[J].工程热物理学报, 2013, 34(5):836-840. WU Yanhui, WU Junfeng, LANG Fangyu, et al.Experimental and numerical investigation of near-tip flow-field in an axial flow compressor rotor:Part Ⅰ flow characteristics at quasi-steady operating conditions[J].Journal of Engineering Thermophysics, 2013, 34(5):836-840.(in Chinese)
|
| [11] |
TONG Zhiting, LIN Feng, CHEN Jingyi, et al.The self-induced unsteadiness of tip leakage vortex and its effect on compressor stall inception[R].ASME Paper GT2007-27010, 2007.
|
| [12] |
ZHANG Hongwu, DENG Xiangyang, LIN Feng, et al.A study on the mechanism of tip leakage flow unsteadiness in an isolated compressor rotor[R].ASME Paper GT2006-91123, 2006.
|
| [13] |
邓向阳.压气机叶顶间隙流的数值模拟研究[D].北京:中国科学院, 2006. DENG Xiangyang.Numerical investigation on tip clearance flow in compressor[D].Beijing:Chinese Academy of Sciences, 2006.(in Chinese)
|
| [14] |
GENG Shaojuan, LIN Feng, CHEN Jingyi, et al.Evolution of unsteady flow near rotor tip during stall inception[J].Journal of Thermal Science, 2011, 20(4):294-303.
|
| [15] |
Hah C, Bergner J, Schiffer H.Short length-scale rotating stall inception in a transonic axial compressor criteria and mechanisms[R].ASME Paper GT2006-90045, 2006.
|
| [16] |
卢新根.轴流压气机内部流动失稳及其被动控制策略研究[D].西安:西北工业大学, 2007. LU Xingen.Flow instability and its passive control strategies in axial-flow compressor[D].Xi'an:Northwestern Polytechnical University, 2007.(in Chinese)
|
| [17] |
张燕峰, 楚武利, 卢新根.跨声速轴流压气机近失速状态的间隙泄漏流流动特性[J].航空动力学报, 2008, 23(7):1293-1298. ZHANG Yanfeng, CHU Wuli, LU Xingen.Numerical simulation of the flow characteristic of tip leakage flow in a transonic axial-flow compressor at near stall condition[J].Journal of Aerospace Power, 2008, 23(7):1293-1298.(in Chinese)
|
| [18] |
Tan C S, Day I, Morris S, et al.Spike-type compressor stall inception, detection, and control[J].Annual Review of Fluid Mechanics, 2010, 42:275-300.
|
DownLoad: