| Citation: | WU Xiang-yu, LI Xu, SHI Yan, ZHANG Cui-hua, DU Zhi-neng. Investigation of thermal fatigue failure characteristics on typical cooling laminated configurations[J]. Journal of Aerospace Power, 2014, (5): 1177-1183.
|
| [1] |
Nealy D A, Reider S B.Evaluation of laminated porous wall materials for combustor liner cooling[J].Journal of Engineering for Power, 1980, 102(4):268-276.
|
| [2] |
Monigia H C, Reider S B.Allison combustion research and development activities[R].AIAA 85-1402, 1985.
|
| [3] |
Wassell A B, Bhangu J K.The development and application of improved combustor wall cooling techniques[R].ASME Paper 80GT-66, 1980.
|
| [4] |
Rolls-Royce Aerospace Group.The jet engine[R].Derbyshire, UK:Rolls-Royce Aerospace Group Publishing Company, 1986.
|
| [5] |
George D G.The application of rapid solidification rate superalloys to radial wafer turbine blade. AIAA 79-1226, 1979.
|
| [6] |
Vershure R W Jr.Engine demonstration testing of a cooled laminated axial turbine[R].AIAA 79-1229, 1979.
|
| [7] |
Hess W G.Laminated turbine design and fabrication[R].NASA CR-159655, 1979.
|
| [8] |
全栋梁, 郁新华, 刘松龄, 等.层板冷却结构流阻特性的试验与数值模拟[J].推进技术, 2003, 24(5):425-428. QUAN Dongliang, YU Xinhua, LIU Songling, et al.Experimental and numerical investigation of internal-flow resistance characteristics in laminate porous plates[J].Journal of Propulsion Technology, 2003, 24(5):425-428.(in Chinese)
|
| [9] |
郁新华, 全栋梁, 刘松龄, 等.层板结构内部换热特性的研究[J].航空学报, 2003, 24(5):405-410. YU Xinhua, QUAN Dongliang, LIU Songling, et al.Investigation of the internal heat transfer characteristics of lamilloy[J].Acta Aeronautica et Astronautica Sinica, 2003, 24(5):405-410.(in Chinese)
|
| [10] |
全栋梁, 刘松龄, 李江海, 等.层板冷却特性的试验与数值模拟研究[J].推进技术, 2004, 25(2):134-138. QUAN Dongliang, LIU Songling, LI Jianghai, et al.Experimental and numerical investigation of the cooling characteristics in a laminate porous plate[J].Journal of Propulsion Technology, 2004, 25(2):134-138.(in Chinese)
|
| [11] |
全栋梁, 刘松龄, 李江海, 等.多孔层板冷却有效性的研究[J].航空动力学报, 2004, 19(4):520-524. QUAN Dongliang, LIU Songling, LI Jianghai, et al.Experimental investigation of cooling effectiveness of laminate porous plates[J].Journal of Aerospace Power, 2004, 19(4):520-524 (in Chinese)
|
| [12] |
陶智, 魏豪杰, 丁水汀, 等.典型层板冷却结构中流体流阻与换热特性的试验[J].航空动力学报, 2007, 22 (2):193-198. TAO Zhi, WEI Haojie, DING Shuiting, et al.Experimental investigation of flow resistance and heat transfer characteristics of typical lamilloy models[J].Journal of Aerospace Power, 2007, 22 (2):193-198.(in Chinese)
|
| [13] |
吕东, 陶智, 邓宏武, 等.两种层板性能对比[J].北京航空航天大学学报, 2008, 34(5):546-550. LÜ Dong, TAO Zhi, DENG Hongwu, et al.Performance evaluation and comparison of 2 porous laminated plates[J].Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(5):546-550.(in Chinese)
|
| [14] |
马龙, 王建华, 吴向宇, 等.利用红外技术进行层板冷却特性试验研究[J].航空动力学报, 2008, 23(4):657-661. MA Long, WANG Jianhua, WU Xiangyu.Experimental investigation of the cooling performance of lamilloy using infrared thermal imaging technique[J].Journal of Aerospace Power, 2008, 23(4):657-661.(in Chinese)
|
| [15] |
WANG Jianhua, LÜ Xijia, LIU Qingdong, et al.An experimental investigation on cooling performance of a laminated configuration using infrared thermal image technique[R].ASME Paper GT2009-59838, 2009.
|
| [16] |
卢元丽, 王鸣, 吉洪湖, 等.扰流柱对层板冷却叶片前缘传热影响的数值研究[J].航空发动机, 2013, 39(2):57-61. LU Yuanli, WANG Ming, JI Honghu, et al.Effect of pin-fin on heat transfer of leading edge for laminated plate cooling blade[J].Aeroengine, 2013, 39(2):57-61.(in Chinese)
|
| [17] |
王鸣, 卢元丽, 吉洪湖.冲击孔对层板冷却叶片前缘传热影响的数值研究[J].航空动力学报, 2013, 28(10):2240-2247. WANG Ming, LU Yuanli, JI Honghu.Numerical investigation on the influences of impingement holes on heat transfer of leading edge in lamilloy[J].Journal of Aerospace Power, 2013, 28(10):2240-2247.(in Chinese)
|
DownLoad: